Ku波段扩展互作用速调管设计

微波电真空器件随着频率的升高,不但聚焦系统难以实现,而且其输出增益和带宽都受到很大的限制,要解决该问题,建议采用扩展互作用速调管,采用分布作用谐振腔技术来扩展其工作带宽和提高增益。利用CST和粒子模拟(PIC)3维软件对其工作在Ku波段扩展互作用速调管进行了设计和仿真,在工作电压30 kV、束流8.5 A的条件下,聚焦系统采用幅值为0.48 T的周期反转永磁聚焦,在输入功率为5.1 W时,得到效率为23%,3 dB带宽为306 MHz,频带内最大增益为39 dB,其峰值功率为58 kW的微波输出。     

青海产6种凤毛菊属植物微量元素分析比较

为了比较青海产6种凤毛菊属植物微量元素的含量,应用火焰原子吸收光谱法分析了青海产6种凤毛菊属植物中微量元素的含量.结果表明,水母雪莲中钙和锰的含量最高分别为8148.58mg/kg和312.55mg/kg,唐古特雪莲中铁和锌的含量最高达5798.98、46.22mg/kg.重齿凤毛菊中铜的含量最高为6.09mg/kg....     

Influence of the stress on magnetoelectric effect in magnetostrictive-PZT bilayers

In this letter, we investigate the influence of the stress on magnetoelectric (ME) effect in a magnetostrictive-PZT bilayer. ME voltage coefficient α*_E = δE / δH, where δE is the induced electric field for an applied alternating current (ac) magnetic field δH, is obtained by solving the stress-related piezoelectric constitutive equation and the conventional magnetostrictive equation with appropriate boundary condition. Based on the free-energy density function of the PZT film in stress state, we get the stress-related piezoelectric charge coefficient ^p d*₃₁ and dielectric permittivity ^pε*₃₃. After taking the cobalt ferrite (CFO) as magnetostrictive phase, it is found that α*_E increases with decreasing 2-d compressive stress for CFO-PZT, which not only is qualitatively consistent with previous experimental measurements, but also provides a possible route to improve the ME effect.      

Layered lithium-rich oxide nanoparticles: low-temperature synthesis in mixed molten salt and excellent performance as cathode of lithium-ion battery

Layered lithium-rich oxide, 0.5Li₂MnO₃·0.5LiMn_1/3Ni_1/3Co_1/3O₂, is synthesized in a mixed molten salt of KCl and LiCl under 750 °C. Its morphology and structure are characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption and desorption isotherm, and its performances as cathode of lithium-ion battery are investigated by charge–discharge test and electrochemical impedance spectroscopy, with a comparison of the samples synthesized via solid-state reaction. It is found that the resulting product consists of uniform nanoparticles, 50 nm in average, which possesses a well crystallite layered structure although its synthesis temperature is low and thus exhibits excellent cyclic stability and rate capability. The resulting product delivers an initial discharge capacity of 268 mAh g^?1 at 0.1 C and has a capacity retention of 82% after 100 cycles at 1 C, compared to the 243 mAh g^?1 and 73% for the sample synthesized by solid-state reaction under 900 °C.     

Analysis on dependence of phase matching angle on temperature in KDP crystal

The dependence of the phase matching (PM) angle on temperature in type-I second harmonic generation (SHG) and type-II third harmonic generation (THG) of KDP is experimentally investigated. The experimental results show that as the crystal temperatures vary by 1 °C, the external PM angles of the KDP doubler and tripler change 100 μrad and 220 μrad, respectively. The PM angle of KDP tripler is more sensitive to temperature variation than is that of the KDP doubler. Comparing the numerical calculations and the previous reports, a discrepancy has been found among the different reported results. Based on the analytical solution of the temperature dependence of the SHG process it is shown that a small error in the thermo-optic coefficients of the crystal is the main factor source of the discrepancy.     

一种新的双偶氮染料掺杂聚合物薄膜的光致双折射及偏振全息的研究

作为一种有可能作为永久信息存储的材料,合成出一种新的双偶氮材料(BA1)。当样品被波长为532nm的光激发时,几乎大部分BA1分子从反-反态转化到顺-顺态,产生了光致双折射。因此,研究了BA1分子掺杂的PMMA薄膜的光致双折射和透过信号与入射光强度的关系。实验结果表明:透过信号强度随着泵浦光的增强而增强。通过偏振态互相平行(SS)和垂直(SP)的两束偏振光用来研究偏振全息存储,结果表明SP光栅形成的衍射信号要比SS光栅的衍射信号强很多。     

SIMCA法判别分析木材生物腐朽的研究

木材是一种生物质材料,容易受到各种微生物的危害,生物腐朽可以迅速导致木材结构的破坏,因此,对木材生物腐朽的快速、准确地检测或鉴定具有重要意义。近几年来,近红外光谱和SIMCA方法正被用于识别或检测食品、药品和农产品等研究中,因此,本研究尝试利用近红外光谱结合SIMCA方法来检测木材的生物腐朽。研究结果表明,应用近红外光谱和SIMCA方法能有效地判别木材的生物腐朽类型,通过培训集样本建立的基于PCA分析的SIMCA判别模型对未腐朽、白腐和褐腐三种类型样本进行回判,判别准确率分别为100%, 82.5%和100%;而对未知腐朽类型的样本(包括未腐朽、白腐和褐腐样本),判别准确率分别为100%, 85%和100%;SIMCA方法对未腐朽和褐腐类型的判别准确率均达到100%,但对白腐样本都有错判,造成这种错判的主要原因可能是由于样本包括的信息不够丰富以及腐朽初期白腐和褐腐试样的性质差异太小等。     

高密度平面靶等离子体中激光驱动冲击波加速离子的能谱展宽

本文对超短超强激光脉冲辐照高密度等离子体产生的静电冲击波加速离子的能谱展宽机理进行了数值研究.着重讨论了三种冲击波加速离子的能谱展宽机理:能量沉积到离子中使得冲击波前沿不断减速,被加速离子与背景粒子的碰撞,以及高能离子到达靶背面时受到鞘层场进一步加速.还研究了驱动激光脉冲宽度对冲击波加速离子能谱宽度的影响. 关键词： 激光等离子体 冲击波加速 能谱展宽     

图形处理器并行计算用于离子发动机粒子模拟

 为了研究离子发动机羽流对航天器的影响,采用质点网格-蒙特卡罗碰撞方法对离子发动机羽流中的交换电荷离子进行了模拟。利用计算设备统一架构技术,开发出一套基于图形处理器的并行粒子模拟程序。随机数生成采用并行MT19937伪随机数生成器算法,电场方程使用完全近似存储格式的代数多重网格法求解。r-z轴对称坐标系中,在z=0 m处获得的电流密度均值为4.5×10^-5 A/m²,图形处理器所得结果与中央处理器模拟结果吻合。在16核心的NVIDIA GeForce 9400 GT图形显示卡上,取得相对于Intel Core 2 E6300中央处理器4.5~10.0倍的加速比。     

光栅减反层太阳能电池光电转换效率的研究

运用时域有限差分方法,研究了光栅减反层结构对太阳能电池光电转换效率及储能效果的影响.具体从光栅形状、高度以及光栅表面金属薄膜厚度出发.结果表明经光栅减反层优化表面结构的太阳能电池的光电转换效率显著增大,储能效果大大得到提升.尤其是三角形光栅太阳能电池.随着镀层厚度的增加,储能效果增加,但当薄膜厚度过厚时,储能效果反而降低.