Preparation and characterization of La<Subscript>0.6</Subscript>Sr<Subscript>0.4</Subscript>Co<Subscript>0.2</Subscript>Fe<Subscript>0.8</Subscript>O<Subscript>3-δ</Subscript> thin-film membrane on porous support by dip-coating method

Perovskite-type La_0.6Sr_0.4Co_0.2Fe_0.8O_3-δ (LSCF6428) thin-film membrane prepared by modified Pechini sol–gel process, was successfully deposited on porous support of similar composition using dip-coating method. Fine grain and crack-free film with perovskite structure was obtained at sintering temperature of 800 °C and dwelling time of 60 min. The cross-sectional image indicated that LSCF6428 thin-film membrane coated on the porous support showed excellent adhesion to the support with uniform thickness. The minimum dense layer thickness obtained by dip-coating method was around 0.5 μm. It was found that the oxygen permeability of the supported thin film was lower than that of the perovskite support, which indicated that the pores of the support were reduced by thin-film deposition on the support surface. The reduction in the pore size led to the more selective permeation mechanism contributes to the overall permeation. Successful deposition of LSCF6428 thin-film membrane on porous support can be considered as a promising technique for the preparation of oxygen separation membrane.     

DFT study on the interaction between monomeric aluminium and chloride ion in aqueous solution

The interaction of monomeric aluminium and chloride ion in aqueous solution is investigated by density functional theory (DFT) calculations. The computational results show that it is difficult for Cl(-) to enter the inner-coordination shell of aluminium complexes by replacing the bound water molecules, independent of pH and the concentration of Cl(-). However, pH and the concentration of Cl(-) might influence the conformations, bond lengths and natural charge populations of monomeric aluminium complexes to a given extent. Based on the computed Gibbs energies, pK(a) values of various hydrolysis species in the presence and absence of Cl(-) are evaluated, respectively. It is concluded that pK(a) increases with the introduction of Cl(-).     

Small and Moderate Prandtl Number Chaotic Convection in Porous Media in the Presence of Feedback Control

Feedback control on thermal convection in a fluid-saturated porous medium is investigated based on the dynamical systems approach. A low dimensional Lorenz-like model was obtained using the Galerkin-truncated approximation. The possible suppression or enhancement of chaotic convection is demonstrated when the fluid layer is subjected to feedback control in a low-dimensional framework.     

Electrospinning of Biomaterials for Vascular Regeneration

Cardiovascular diseases have been the leading cause of morbidity and mortality in the world recently. With the growing aging population accompanied by chronic diseases, such as uremia and diabetes, there is an increasing clinical demand for vascular grafts with proper performance. Although some achievements have been made in the development of tissue-engineered vascular grafts composed of natural and synthetic polymeric materials or decellularized vessels, clinical applications with a diameter of less than 6 mm are still principally derived from autografts, such as autologous saphenous veins. Many challenges remain in anti-thrombosis, rapid endothelialization, modulating the inflammatory response and inhibition of intimal hyperplasia and calcification. In the review, recent progress in the electrospinning of biodegradable polymers for vascular regeneration are summarized, especially from the view of biomechanical factors. Hybrid vascular grafts consisting of natural and synthetic polymers with multicomponent, di-or tri-layers are focused in order to provide novel experiences in biomaterials for applications in this field.     

In vivo metabolism study of bergenin in rats by HPLC‐QTOF mass spectrometry

Bergenin is the major component of Ardisia creanta sims and Rodgersia sambucifolia hemsl with many biological activities. Although bergenin has been used to treat human diseases in China for man years, there is no report regarding its metabolism. This is the first report to separate and identify the metabolites of bergenin in vivo. In the study, HPLC/Q‐TOF‐MS/MS was used to investigate the metabolites of bergenin in vivo by analyzing the rat body fluid and feces samples. Three metabolites of bergenin were finally identified by the TIC chromatograms, and the structures were also confirmed by their MS² spectra. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of LiNi1/3Co1/3Mn1/3O2 cathode material by a modified sol–gel method for lithium-ion battery

LiNi_1/3Co_1/3Mn_1/3O₂ was prepared by a modified sol–gel method, selecting ethylene diamine tetraacetic acid and citric acid as the co-chelating agent. The mole ratios of ethylene diamine tetraacetic acid (EDTA) to metal ion (Mⁿ⁺) were 0:1, 1:1 and 2:1. The obtained samples were characterized by XRD, BET and SEM. The XRD showed that LiNi_1/3Co_1/3Mn_1/3O₂ had good crystallinity and well-ordered layered structure. After calcined at 850 °C, the LiNi_1/3Co_1/3Mn_1/3O₂ particles exhibited a three-dimensional space network structure, which was greatly correlated with the ratio of EDTA to metal ion. The LiNi_1/3Co_1/3Mn_1/3O₂ obtained from a mole ratio of 1:1 (EDTA:Mⁿ⁺) had the best electrochemical performance. The reversible capacities were reached 168 and 100 mAh/g at 1C and 10C discharge rate, respectively. The result of the cycling performance showed a high capacity maintenance ratio of 89.3 % at 1C and 25 °C after 50 cycles. The further electrochemical performance was evaluated by electrochemical impedance spectroscopy and cyclic voltammetry.     

Improved Identification and Relative Quantification of Sites of Peptide and Protein Oxidation for Hydroxyl Radical Footprinting

Protein oxidation is typically associated with oxidative stress and aging and affects protein function in normal and pathological processes. Additionally, deliberate oxidative labeling is used to probe protein structure and protein–ligand interactions in hydroxyl radical protein footprinting (HRPF). Oxidation often occurs at multiple sites, leading to mixtures of oxidation isomers that differ only by the site of modification. We utilized sets of synthetic, isomeric “oxidized” peptides to test and compare the ability of electron-transfer dissociation (ETD) and collision-induced dissociation (CID), as well as nano-ultra high performance liquid chromatography (nanoUPLC) separation, to quantitate oxidation isomers with one oxidation at multiple adjacent sites in mixtures of peptides. Tandem mass spectrometry by ETD generates fragment ion ratios that accurately report on relative oxidative modification extent on specific sites, regardless of the charge state of the precursor ion. Conversely, CID was found to generate quantitative MS/MS product ions only at the higher precursor charge state. Oxidized isomers having multiple sites of oxidation in each of two peptide sequences in HRPF product of protein Robo-1 Ig1-2, a protein involved in nervous system axon guidance, were also identified and the oxidation extent at each residue was quantified by ETD without prior liquid chromatography (LC) separation. ETD has proven to be a reliable technique for simultaneous identification and relative quantification of a variety of functionally different oxidation isomers, and is a valuable tool for the study of oxidative stress, as well as for improving spatial resolution for HRPF studies.

专业课"课程思政"策略的构建与实践——以基础化学原理课程为例

目前高等教育仅依靠思想政治理论课对大学生进行价值引领的局限性日趋凸显,亟需构建和实施全员育人的大思政教育体系——"课程思政"。尝试构建了专业课"课程思政"的策略。通过"培养学生的爱国主义精神、民族自豪感和自信心、对学生进行生态文明和生态安全教育、培养学生的专业品质、培养学生的专业能力"等途径,进行了基础化学原理"课程思政"实践,充分发挥了基础化学原理课程的"育德功能"。     

Effects of two-phase nanofluid model on MHD mixed convection in a lid-driven cavity in the presence of conductive inner block and corner heater

Journal of Thermal Analysis and Calorimetry - This paper investigates a steady mixed convection in a lid-driven square cavity subjected to an inclined magnetic field and heated by corner heater...     

Dielectric and elastic properties of fluorine-containing tricyclic isothiocyanate liquid crystal

The dielectric and elastic properties of liquid crystals (LCs) generally depend on the molecule structure, such as polar group and carbon chain length. For further investigation of the influence of molecular structure on the dielectric and elastic properties of fluorine-containing tricyclic isothiocyanate LC, the experimental temperature was controlled at 25°C by precision hot stage, and a precision LCR meter was used to measure the capacitance of six LC cells under the voltage from 0.1 to 20 V at 1 kHz. An LC cell capacitance model and a dual-cell model were adopted to obtain the dielectric anisotropy, and the capacitance–voltage curves of six LC materials were plotted. The threshold voltage of Fréedericksz transition was analysed, and a finite difference iterative method was used to attain specific values of three elastic constants. The influence of molecular structure on the dielectric and elastic constants was finally analysed. Experimental results showed that the introduction of meta-difluoro group would increase the dielectric anisotropy and reduce the threshold voltage of LC. As the length of the alkyl carbon chain increased, the dielectric anisotropy would have an odd–even alternation effect, which would lead to changes in the elastic constants of LC.