累托石/聚丙烯插层纳米复合材料的制备与性能

采用熔融共混法制备了有机改性累托石 (OREC)粘土 均聚聚丙烯 (PP)纳米复合材料 ,以X 射线衍射分析 (XRD)及透射电子显微镜分析 (TEM)观察了复合材料的相貌结构 ,研究了复合材料的力学性能及热性能 .结果表明 ,OREC在添加份数较少时可与均聚聚丙烯熔融插层形成插层型聚丙烯纳米复合材料 ,该复合材料与纯PP相比 ,具有较高的拉伸强度、断裂伸长率及冲击强度 .在有机粘土添加 2 %时 ,复合材料的拉伸强度、断裂伸长率、冲击强度最高 ,与纯PP相比 ,2 %添加量的聚丙烯纳米复合材料拉伸强度提高 6 5 7% ,断裂伸长率提高 2 89 3% ,冲击强度提高 14 1% ,10 %失重率时对应的热分解温度提高 50K .     

富氧条件下Ag/LaMn1-xPdxO3催化剂直接分解NO研究

分别使用柠檬酸络合法和浸渍法制备了钙钛矿型复合氧化物催化剂LaMn1-xPdxO3(x=0,0.01,0.02,0.03,0.04)和不同Ag负载量的Ag/LaMn0.99Pd0.01O3催化剂.使用XRD,BET手段对各催化剂进行了表征,同时在反应条件:NO 0.1%,O2 8%,H2O 0或10%,SO2 0或0.008%,N2为平衡气体,接触时间为0.03g·s·ml-1(GHSV=30000h-1)下对催化剂的活性进行了考察.实验结果发现,当贵金属Pd在B位部分替代Mn时,替代量x=0.01时的催化剂对于催化氧化分解NO反应具有最高活性.另外,在LaMn0.99Pd0.01O3催化剂上负载2%Ag也明显提高了催化剂的活性.而且LaMn0.99Pd0.01O3和2%Ag/LaMn0.99Pd0.01O3催化剂尽管抗水性能不好,但却具有较强的抗SO2性能.     

外力辅助分散作用下环氧树脂粘土纳米复合材料中粘土的微观结构与解离机理研究

采用不同分散方法(机械搅拌、高速均质搅拌和球磨分散)制备环氧树脂粘土纳米复合材料,研究了分散方法对不同有机粘土解离结构和纳米复合材料力学性能的影响,并在此基础上探讨了粘土的解离机理.结果表明,普通机械搅拌只能使小粒径粘土或大粒径粘土团聚体的外部片层解离;施加一定的外力(如高速均质搅拌)促进粘土团聚体分散,有利于粘土片层的解离;利用剪切摩擦作用较强的球磨法分散粘土,不同处理剂改性粘土的内外片层都可以充分解离,而有机改性剂中酸性质子的催化作用对粘土片层解离的影响不大,只要粒径足够小,片层解离的驱动力(基体弹性力、反应性等)能够克服其所受阻力(片层引力、层外基体粘性阻力、层内粘性引力等),粘土内外各片层将会同时向外迁移而解离.纳米复合材料的力学性能大大改善,冲击强度和弯曲强度分别提高近50%和8%;     

荧光共振能量转移测定杀虫单

1引言 研究了钙黄绿素（Calcein）与酚藏花红（PF）的荧光共振能量转移现象，并且将其作为探针用来测定杀虫单，扩大了荧光共振能量转移的应用领域。该方法准确、简便，灵敏度高，检出限低，同时能消除仪器噪音影响，结果令人满意。     

Simultaneous determination of pantoprazole and its two metabolites in dog plasma by HPLC

A simple and sensitive high-performance liquid chromatography (HPLC) method is developed and validated for simultaneous determination of pantoprazole and its two metabolites (pantoprazole sulfone and pantoprazole thioether) in dog plasma and applied to a pharmacokinetic study in Beagle dogs. Following a protein precipitation procedure, the samples are separated using reversed-phase HPLC (C18) by a gradient of acetonitrile and ammonium acetate (pH 6.0) at a flow rate of 1.0 mL/min and quantitated using UV detection at 290 nm. Omeprazole is selected as the internal standard. The method has a lower limit of quantitation of 0.025 microg/mL for pantoprazole and its two metabolites, using 0.1-mL aliquots of plasma. The linear calibration curves are obtained in the concentration range of 0.025-10.0 microg/mL for three analytes. The intra- and interrun precision (relative standard deviation), calculated from quality control (QC) samples, is less than 13% for three analytes. The accuracy determined from QC samples is between -6.4% and 12%.     

镝掺杂LaPO4拉曼光谱变化规律的探讨

采用水热法和后续热处理合成出单斜相LaPO4以及LaPO4:Dy3+,通过XRD对样品进行物相分析,结果表明:所得样品为LaPO4,且XRD图谱及拉曼光谱中峰位的偏移表明Dy的存在,即Dy被掺杂到LaPO4基质中。通过研究用Dy对LaPO4进行不同量掺杂后其拉曼光谱的变化规律,进而找出用Dy对LaPO4进行不同量掺杂后其内部结构的变化规律。结果显示,用Dy对LaPO4进行不同量掺杂后,随着掺杂比例的增大,晶格畸变程度先上升后下降,且在镧镝物质的量比例为1∶0.06时对基体晶格结构影响最大。     

In vivo metabolism study of bergenin in rats by HPLC‐QTOF mass spectrometry

Bergenin is the major component of Ardisia creanta sims and Rodgersia sambucifolia hemsl with many biological activities. Although bergenin has been used to treat human diseases in China for man years, there is no report regarding its metabolism. This is the first report to separate and identify the metabolites of bergenin in vivo. In the study, HPLC/Q‐TOF‐MS/MS was used to investigate the metabolites of bergenin in vivo by analyzing the rat body fluid and feces samples. Three metabolites of bergenin were finally identified by the TIC chromatograms, and the structures were also confirmed by their MS² spectra. Copyright © 2013 John Wiley & Sons, Ltd.     

Graphyne-oxide supported Pd catalyst with ten times higher nitrobenzenes reduction activity than Pd/C

Research on Chemical Intermediates - Upon oxidation, a graphyne-like porous carbon-rich network (GYLPC), which is a two-dimensional carbon material consisting of sp- and sp2-hybridized carbon atoms...     

Mimicking the cell membrane with block copolymer membranes

Cell membranes are essential barriers in Nature. To understand their properties and functions and to develop desirable applications, a simple and elegant approach is to study membranes that mimic the cell membrane. Lipid bilayers represent simple models that are physiologically representative when in the form of mixtures of various lipids, but they are not adequately stable even when covered with amphipathic proteins or when combined with polymers, thus preventing technological applications. This makes necessary the design of completely synthetic membranes. In this respect, amphiphilic copolymers that self‐assemble under dilute aqueous conditions and generate supramolecular polymer vesicles or films are ideal candidates for synthetic membranes. Their versatility in terms of chemistry and properties (permeability, mechanical stability, thickness), if appropriately designed, enable the insertion of biological molecules, such as membrane proteins and biopores, or the attachment of biomolecules at their surfaces. Here, we present the domain of synthetic membranes based on amphiphilic copolymers beginning with their generation and up to their applications in medicine, the food industry, and technology. Even though significant progress has been made in combining them with membrane proteins, open questions remain with respect to desired properties that could accommodate biological molecules and support further development of the field, from both the point of view of fundamental understanding and of applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Core–shell CeO2 micro/nanospheres prepared by microwave-assisted solvothermal process as high-stability anodes for Li-ion batteries

Journal of Solid State Electrochemistry - Core–shell CeO2 micro/nanospheres are prepared via microwave-assisted solvothermal process followed by calcination in air. The reaction time is only...