Characteristics of soft magnetic composite material under rotating magnetic fluxes

This paper reports the measurement of magnetic properties of the soft magnetic composite material SOMALOY^TM 500 in a square sample under different patterns of flux density with 2D magnetic excitations. The test system, principle of measurement, magnetic power loss calculation, and methods of correction for misalignment of H surface sensing coils are presented. The experimental results show that although nominally isotropic, the SOMALOY^TM 500 sample exhibits some anisotropy. The results are useful in the design and performance analysis of rotating electrical machines.     

Validation of an optimization procedure to improve low frequency characteristics of rooms

A set of experiments was carried out to validate an optimization procedure based on finite element method (FEM). The idea of the procedure, fully presented in previous edition of this journal [Zhu X, Zhu Z, Cheng J. Using optimized surface modifications to improve low frequency response in a room. Appl Acoust 2004;65:841-60], is to produce an optimal geometry modification on the wall for improving low frequency sound uniformity in small rooms. Four experimental models were set up with a scale of 1:5. One was modified according to the optimized result and the others were treated with no optimization consideration. Measured frequency responses of four rooms were compared with numerical results calculated by FEM models. The transient responses in these rooms were also measured and analyzed. The agreements between calculation and measurement are satisfactory though the discrepancies due to the uncertainty of acoustic behavior of the room boundaries remain. The optimization procedure has been supported by the results that the optimized room produces the flattest frequency response and also the most smooth energy decay within the frequency range studied. The reductions of response fluctuation have reached 4.3 dB for prediction and 2.6 dB for measurement, respectively.     

(NH4)2MoS4在活性炭上浸渍过程的研究:Ⅱ.干燥机理及模型

（ＮＨ＿４）＿２ＭｏＳ＿４在活性炭上浸渍过程的研究Ⅱ．干燥机理及模型秦慧芳，张成芳，陆岗，俞丰，朱子彬（华东理工大学无机化工研究所，上海２００２３７）２３７）关键词硫代钼酸铵，活性炭，干燥，钼分布，干燥模型负载型催化剂的活性组分在载体上的分布，受浸渍...     

Use of zwitterionic buffer additives to improve the separation of proteins in capillary zone electrophoresis

In CZE, the adsorption of the proteins on the capillary wall is a common problem. This paper describes the simple method of utilizing zwitterionic buffer additives to improve the separation of proteins in untreated fused silica capillaries at neutral pH. Three kinds of zwitterion are evaluated in the separation of acidic, neutral, and basic proteins, including their effect on protein efficiency, mobility, separation, and resolution; the difference between the effects of the different additives are also highlighted. The method has proved to be a possible means of reducing protein adsorption, especially for basic proteins.     

An experimental and computational investigation of crack initiation and stable crack growth of ductile materials

Crack initiation and stable crack growth under monotonic loading in steels has been studied using an elastic-plastic finite element analysis. The fracture criterion used for crack initiation and stable crack growth was the critical strain energy density. In addition the shift core method for the analysis of crack extension was used. In the shift core modelling method, crack advance is simulated by moving the coordinates of the core region which surrounds the crack tip, to obtain the stiffness reduction. Simultaneously the core itself geometrically undergoes a simple rigid-body motion or translation during the crack extension. The analytically calculated and experimentally measured load for crack initiation and the subsequent stable crack growth agreed well.     

条件泛函及其导数非参数估计的强一致收敛速度

研究了条件泛函及其导数的非参数估计,对随机与固定设计的条件泛函,分别利用核估计和非参数加权估计,在核函数及权函数满足一定条件下,证明了估计一致强收敛于待估函数的速度可达到最优。从而进一步推广和发展了Hrdle,etal.(1988)、Severini,etal.(1992)的许多结果。     

C~k连续的保形分段2k次多项式插值

1．引言在每个子区间上，通过插入至多一个内结点，Brodlie和Butt［1］给出了分段三次多项式保形插值算法，Randal［2］等讨论了分段五次多项式插值，作者［31讨论了一般分段奇次多项式的保形插值，并且给1了内结点的位置范围公式．这种插值方法完全解决了一般的分段奇次多项式的保形插值问题．关于分段偶次多项式的保形插值，大多数文献只讨论分段二次保形插值，这里要特别指出的是Shumake［4j导出了二次样条保凸的充要条件，并且给出了一个二次样条保形插值的方法．在每一个子区间上至多插入一个内结点，则一个二次插值样条就可得到．作…