热泵中定容水箱保温率的研究

提出定容水箱保温率的概念及其方程。为此,本实验对定容水箱自然冷却过程中各热力参数进行了测量。根据实验所测数据及相关公式推导,得到保温率方程的经验函数关系式。同时,通过对测量曲线和经验函数曲线的拟合,验证了定容水箱保温率方程。     

Spectral behavior of pulsed Bessel beams focused by a dispersive lens

Starting from the Huygens–Fresnel diffraction integral, the analytical expression for the power spectrum of pulsed Bessel beams focused by a dispersive aperture lens is derived and used to study the spectral anomalies of pulsed Bessel beams in the focused field. Numerical calculation results are given to illustrate the dependence of spectral anomalous behavior on the pulse parameters, truncation parameter and material dispersion of the lens. It is shown that near the phase singularities the spectral anomalies may take place. The potential applications of spectral anomalies of ultrashort pulsed beams in information encoding and information transmission are considered.     

Mode decoupling in solid state ring laser based on stimulated Raman effect in polar crystals

In this paper we study the gain saturation induced mode-coupling control in solid state ring laser devices based on the stimulated Raman effect of the polar crystals in order to realize solid state ring laser gyroscopes.We theoretically investigate the mode coupling induced by gain saturation between clockwise (CW) and counterclockwise (CCW) propagating laser modes.Because the CW and CCW running waves are pumped with counter-propagating lasers respectively,the independent coexistence can be ensured.     

Enhanced nonlinearity in photonic crystal fiber by germanium doping in the core region

Germanium doping in silica can be used as a method for nonlinearity enhancement.Properties of the enhanced nonlinearity in photonic crystal fiber(PCF)with a GeO2-doped core are investigated theoretically by using all-vector finite element method.Numerical result shows that the nonlinear coefficient of PCF is greatly enhanced with increasing doping concentration,furthermore,optimal radius of the doped region should be considered for the desired operating wavelength.     

Microstructures and multiferroic properties of textured Bi0.8La0.2FeO3 thin films

La-substituted BiFeO₃, Bi_0.8La_0.2FeO₃, thin films were fabricated on Pt/Ti/SiO₂/Si substrates by pulsed laser deposition. X-ray diffraction and high-resolution transmission electron microscope were used to analyze the structures of the films. The results show the films fabricated under optimized growth condition are (0 1 2) textured. X-ray photoemission spectroscopy results indicate that the oxidation state of Fe ion is Fe³⁺ in the films without detectable Fe²⁺. The films show low leakage current and excellent dielectric characters. Multiferroic properties with a remnant ferroelectric polarization of 5.2 μC/cm² and a remanent magnetization of 0.02 μ_B/Fe were established. These results have some implications for further research.     

Widely phase-matched tunable difference-frequency generation in periodically poled LiNbO3 crystal

We report on the development of a laser source in the mid-infrared spectral region based on difference-frequency generation (DFG) in a periodically poled LiNbO₃ (PPLN) crystal. Continuously tunable coherent radiation from 2.75 to 4.78 μm was produced by optical parametric interaction between a diode-pumped monolithic continuous-wave (CW) Nd:YAG laser operating at 1.064 μm and a CW Ti:Sapphire laser tunable from 767 to 871 nm. Temperature-dependent quasi-phase-matched DFG wavelength acceptance bandwidth was studied and characterized. An empiric formula is given to estimate the phase-matched wavelength acceptance bandwidth as a function of the crystal temperature at Λ = 22.5 μm. A large frequency scan of 128 cm⁻¹ (about 78 cm⁻¹ above 1 μW) near 4.2 μm was achieved. The whole absorption spectrum of the P and R branches of the ν₃ band of atmospheric carbon dioxide has been recorded with a single phase-matched frequency scan.     

A strain-induced birefringent double-clad fiber Bragg grating

A strain-induced birefringence double-clad (DC) fiber Bragg grating (FBG) is proposed and demonstrated.The grating is fabricated in the core of rectangular inner cladding double clad fiber by using phase mask method. By applying lateral strain on the grating, the birefringence is induced. In order to detect the birefringent effect of the grating, we use it as the output mirror of a laser. When lateral strain is applied,the grating becomes birefringent. Therefore, one reflection peak of double-clad fiber Bragg grating becomes two peaks and the laser also lases in two wavelengths. The wavelength spacing of the laser can be tuned from 0 to 0.8 nm. The absolute wavelengths for the two polarizations can be tuned 1.2 and 2.0 nm,respectively.     

Development of infrared spectral radiation measurement system of a non-luminous flame

The spectral radiation characteristic of a non-luminous flame is analyzed. The apparatus and the calibration procedure based on infrared emission spectrometry for measurements of the flame are introduced.The influence of background radiation and stray light on the measurement results could be reduced and suppressed by the design of thermolator and digital lock-in technique. A blackbody cavity was used as reference emission source to calibrate the system that completed absolute measurement. The spectral measurement range is 1-20 μm. The least measuring distance and the lowest power detected at the entrance pupil are 550 mm and 10-9 W/cm2, respectively. The experimental results show that the measure error is less than 10%.     

Surface-enhanced resonant Raman spectroscopy (SERRS) of single-walled carbon nanotubes absorbed on the Ag-coated anodic aluminum oxide (AAO) surface

In this paper, we developed a new kind of substrate, the silver-coated anodic aluminum oxide (AAO), to investigate the characters of surface-enhanced resonant Raman scattering (SERRS) of the dilute single-walled carbon nanotubes. Homogeneous Ag-coated AAO substrate was obtained by decomposing the AgNO₃ on the surface of AAO. single-walled carbon nanotubes (SWNTs) were directly grown onto this substrate through floating catalyst chemical vapor deposition method (CVD). SERRS of SWNTs was carried out using several different wavelength lasers. The bands coming from metallic SWNTs were significantly enhanced. The two SERRS mechanisms, the “electromagnetic” and “chemical” mechanism, were mainly responsible for the experiment results.