无界集值上鞅的Riesz逼近

研究了弱紧凸集值上鞅及无界集值上鞅的Ｒｉｅｓｚ逼近，以及鞅型集序列的若干收敛定理．     

聚氨酯丙烯酸酯作为预聚体的光敏树脂的制备及性能

以六官能度聚氨酯丙烯酸酯(B-618)、三官能度聚氨酯丙烯酸酯(DH-317)、三丙二醇二丙烯酸酯(TPGDA)和1-羟基环己基苯甲酮(Irgacure184)作为组分制备一系列光敏树脂。利用凝胶率测定法对其光敏树脂的光敏性进行了研究。同时,对该光敏树脂的光固化膜进行了力学性能的测试。实验结果表明该光敏树脂的较佳配方为B-618质量分数28%,DH-317质量分数43%,TPGDA质量分数25%和Irgacure184质量分数4%,且固化膜具有较好的柔韧性、冲击强度和拉伸强度。 更多还原     

江西省社会发展评价指标体系的建构及对各地市的评价

本文介绍了由本省省情构建的一套江西省社会发展评价指标体系,并用系统工程和计算机技术对全省11地市1988至1990年三年间的社会发展进行综合评述。     

催化光度法测定痕量铁

基于铁对过氧化氢氧化对-氨基二甲基苯胺盐酸盐的催化活性,建立了测定痕量的新方法。灵敏度为1.6×10-11g/mL,测定范围为0～0.50μg Fe/50mL,用于测定几种实物样品中的痕量铁,相对标准偏差0.65～2.6%.     

C60在几种溶剂中紫外吸光度的负热效应

所采用的变温光谱差减方法是将待测试样分成两份 ,一份作为参比试样 ,恒定在某一温度 (参比温度 )下 ,另一份作为待测样品 ,选定另一待观测温度 ,在一定的波长范围内 ,用岛津UV 2 4 0型紫外 可见双光束分光光度计扫描 ,获得紫外吸收温差光谱 (UVSDT)。选择不同的温度差 ,测得温差光谱随温差的变化。观测了C60 分子在乙醇、环己烷、正己烷、异丙醇等几种有机溶剂中吸光度随温度的变化。观测结果发现C60 溶液的吸光度变化存在显著的负温度效应。C60 的UV吸收光谱峰随试样温度升高而降低 ,UV吸收温差光谱 (U VSDT)为负峰 ,UVSDT峰强随温差增大而负向增大。说明C60 的结构对温度有较强的依赖关系。这种依赖关系与π π 电子跃迁类型密切相关。实时现场测量C60 溶液的吸光度随温度变化规律 ,对分离、纯化、分析富勒烯 ,认识C60 特性、研究以溶剂为媒介的化学反应机理 ,以及提高测量的准确度和重现性等 ,均有一定的理论意义和实用价值     

LD side-pumped Nd:GGG CW laser operating at 1110 and 1105 nm dual wavelengths and 1110 nm single wavelength

A diode-side-pumped continuous-wave Nd:GGG laser operating at dual-wavelength (1110 and 1105 nm) and single wavelength of 1110 nm is demonstrated for the first time. The maximum output power of the 1110 and 1105 nm dual-wavelength operation is 13.2 W. By adjusting the orientation of an insertion mirror, the relative intensities of the two wavelengths can be changed. Thus single wavelength operation at 1110 nm is obtained, and the output power is 9.6 W.     

Multi-color display and its model for a white OLED combined with optical color filters

A bright white organic light-emitting diode (OLED) has been successfully fabricated in which a greenish-white emitting host Bis-(2-(2-hydroxyphenyl) benzothiazole)zinc (Zn(BTZ)₂) is doped with an orange-red fluorescent dye 5,6,11,12-tetraphenylnaphthacene (rubrene). The pure white light emission with CIE coordinates of (0.341, 0.334) is achieved at the driving voltage of 20 V, and the corresponding luminance and external quantum efficiency are 4000 Cd/m² and 0.63%. On the other hand, the pure red, green, and blue (RGB) emissions are obtained from the white OLED combined well with RGB custom-built optical color filters (CFs) with peaks at 616, 556, and 456 nm, respectively. Moreover, based upon the color mixture principles, we build a model of multi-color display mixed by the pure RGB emissions under the controllable bias.     

Effect of viscous damping on power transmissibility for the vibration isolation of building services equipment

Vibration isolation plays an important role in both the vibration and noise control of building services equipment. To evaluate vibration isolation performance, the force transmissibility method is commonly adopted. However, increasing the damping effect in the force transmissibility method reduces both the resonance peak value and the isolation performance in the “isolation region”. The limitation of the method is that the transmitted displacement of a floor structure and the interaction of mounting points are neglected. To include the floor displacement and the interaction of mounting points, Mak and Su recently proposed the power transmissibility method to assess the performance of vibration isolation. In this paper, the effect of viscous damping on power transmissibility is investigated. A practical procedure for experimentally determining the damping ratio is also given.     

Efficient and stable single-dopant white OLEDs based on 9,10-bis (2-naphthyl) anthracene

Efficient white organic light-emitting diodes (WOLEDs) are fabricated with a thin layer of 9,10-bis (2-naphthyl) anthracene (ADN) doped with Rubrene as the source of white emission. A device with the structure of ITO/NPB (70 nm)/ADN: 0.5% Rubrene (30 nm)/Alq₃ (50 nm)/MgAg shows a maximum current efficiency of 3.7 cd/A, with the CIE coordinates of x=0.33, y=0.43. The EL spectrum of the devices and the CIE coordinates remains almost the same when the voltage is increased from 10 to 15 V and the current efficiency remains quite stable with the current density increased from 20 to 250 mA/cm².     

Evaluation of micro-bubble size and gas hold-up in two-phase gas-liquid columns via scattered light measurements

In this paper, potential use of an elliptically polarized light scattering (EPLS) method to monitor both bubble size and gas hold-up in a bubble-laden medium is explored. It is shown that with the use of the new EPLS system, normalized scattering matrix elements (M_ij's) measured at different side and back-scattering angles can be used to obtain the desired correlations between the bubble sizes and input flow parameters for a gas-liquid (GL) column, including gas flow rate and surfactant concentrations. The bubble size distributions were first evaluated experimentally using a digital image processing system for different gas flows and surfactant concentrations. These images showed that the bubbles were not necessarily spherical. We investigated the possibility of modeling the bubbles as effective spheres. The scattering matrix elements were calculated using the Lorenz-Mie theory and the results were compared against the experimentally determined values. It was observed that the change in the bubble size yields significant changes in M₁₁, M₃₃, M₄₄, and M₃₄ profiles. An optimum single measurement angle of θ=120^° was determined for a gas velocity range of 0.04-0.35 cm/s (). The choice of the optimum angle depends on frit pore size, column diameter, gas pressure, and surfactant concentration. These results suggest that a simplified version of the present EPLS system can effectively be used as a two-phase flow sensor to monitor bubble size and liquid hold-up in industrial systems.