Syntheses of (-)-TAN-2483A, (-)-massarilactone B, and the fusidilactone B ring system. Revision of the structures of and syntheses of (+/-)-Waol A (FD-211) and (+/-)-Waol B (FD-212)

The structure of waol A has been revised from 1 to 6, the vinylogue of TAN-2483A (5). Aldol reaction of hydroxybutanolides 13b,c with 2,4-hexadienal affords 12b,c, which are subjected to iodoetherification with bis(sym-collidine)IPF6 to provide 11b(c). Treatment with Et3N in CH2Cl2 completes the three-step syntheses of TAN-2483A (5) and waol A (6). Aldol reaction of hydroxybutanolide 31 with 2,4-hexadienal affords 32, which is subjected to iodoetherification to provide 34, which in turn is treated with Bu3SnCl, NaBH3CN, and oxygen to provide diol 60. Further elaboration completes the first syntheses of massarilactone B (7) and the fusidilactone B (9) ring system.     

氧化锶催化性质：Ⅱ.SrO,MgO上异丙醇的分解反应

ＳｒＯ，ＭｓＯ对异丙醇的分解反应有各自的作用形式，因而产物分布也有明显差别．ＭｇＯ上异丙醇分解，在较低温度时，主要产物为丙酮和丙烯；随温度升高，生成丙烯的量增加，而丙酮的量减少，直至消失，在ＳｒＯ上，异丙醇在较高温度时反应，产物几乎为丙酮，丙烯的生成量极少。认为：产物中丙烯来源于异丙醇在催化剂表面强酸中心上的脱水；丙酮在ＭｇＯ上来源于强碱中心和酸中心协同作用异丙醇的脱氢，而在ＳｒＯ上则是ＳｒＯ表面极强的碱中心作用异丙醇而脱氢制得。     

Aqueous p-nitrotoluene oxidation induced with direct glow discharge plasma

A plasma induced degradation process has been studied to treat 4-nitrotoluene (4-NT) present as an aqueous pollutant. The plasma was locally generated from a glow discharge around a tip of a platinum anode in an electrolytic solution. The influence of initial pH and Fe²⁺ on the degradation was examined. Major intermediates resulting from the degradation process were identified. Amongst the aromatic intermediates, p-hydroxybenzoic acid was the predominant degradation product. The formation of oxalic acid, malic acid was also observed. The final products of degradation were NH ₄ ⁺ , NO ₃ ⁻ and CO₂. Based on the analysis of intermediates and the kinetic considerations, the degradation was shown to follow a pseudo-first order reaction hence, a possible reaction pathway was proposed.     

Study on the Phase Diagram of CsCl-CeCl3-HCl(11%)-H2O System and the Properties of the Compounds

The equilibrium solubility of CsCl-CeCl3-HCl(11%)-H2O qua-ternary system at 25℃ has been determined by the physicchemical analysis method ,and the phase diagram was plotted, Two new double salts 3CsCl.CeCl3.3H2O and CsCl.CeCl3.4H2O obtained from the complicated system were identified and characterized by XRD,TG-DTA ,DSC,UV and fluorescence spectroscopy, Studies on the fluorescence excitation and emission show that 3CsCl.CeCl3.3H2O and CsCl.CeCl3.4H2O have upconversion luminescence of infrared-visible range,and the upconversion emission intensity increases with the increase of ratio of CeCl3 in CsCl.     

Formation,growth mechanism and packing sequences of binary alloy cluster anions from laser ablation of mixtures of lead and transition metals

By using laser ablation of the mixtures of a transition metal (M: Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn, Pd, Ag) plus lead, M/Pb binary cluster anions were observed except for Zn, and the number of transition metal atoms contained in the binary clusters is at most 4. This behavior is different from that reported previously for M/Ge binary clusters. The experiments indicate that it is also very difficult to form Al/Pb clusters. The distribution patterns of M/Pb binary alloy cluster anions are remarkably similar to those of pure Pb clusters, consistent with a formation mechanism in which transition metal atoms are sequentially attached to [M(x-1)Pb(y)](-) clusters and thus form [M(x)Pb(y)](-) clusters by a simple condensation process. As the number of transition metal atoms increases, the intensities of binary clusters gradually decrease. It is proposed that [MPb(4)](-) and [MPb(5)](-) cluster anions might be the unit building blocks of M/Pb binary cluster anions, and the layer packing sequences for magic clusters are predicted on this basis. The [M(x)Pb(y)](-) binary clusters containing 13 atoms (x + y = 13; x not equal 0) are proposed to have an icosahedral structure.     

The evolution of morphology of ordered porous TiO2 films fabricated from sol-gel method assisted ZnO nanorod template

Ordered porous TiO₂ films, including TiO₂ nanotube arrays, are fabricated by a sol-gel dip-coating approach via ZnO nanorod templates obtained from aqueous solution approach. The results indicate that the morphologies of ordered porous TiO₂ films have been great affected by the sol-gel dip-coating cycle number. Open-ended TiO₂ nanotube arrays can be obtained in optimum dip-coating cycle numbers. The TiO₂ nanotubes with the inner diameter matching well with the diameters of ZnO nanorods, are well assembled and separate each other. When the cycle number is less than this optimum value, no intact porous TiO₂ film can be obtained. As the cycle number is larger than this optimum value, an ordered porous TiO₂ film with many throughout holes is formed. The evolutive mechanism of ordered porous TiO₂ films is proposed.     

Bis(crown-6)calix[4]arene/Cs+ Coordination Chemistry in NPME Solution

NMR spectroscopy was used to show that the symmetry of the crown ether bis(C6) is increased by an increase of the alkali metal cation radius. The EXAFS spectrum demonstrates that a seven oxygen atom coordinated configuration is present in the bis(C6)/Cs⁺/NPME system, where NPME denotes o-nitrophenylmethyl ether. The seventh oxygen in this complex, besides the six crown ether oxygens of bis(C6), may come either from a H₂O molecule or an NO₃⁻ ion.     

Characterization and separation of Al13 species using gel-filtration chromatography

A polyaluminum chloride (PAC) sample was prepared using a slow alkaline titration method. The Bio-Gel P-100 gel column chromatographic technique was used to separate and characterize the various forms of aluminum present in the prepared PAC solution. The effluents from a gel column were monitored using online chemical method: Al-Ferron timed complexation spectrophotometry and by ²⁷Al nuclear magnetic resonance (NMR) spectroscopy. Effects of different experimental conditions such as eluent flow rate, ionic strength and pH on separation of Al₁₃ were investigated. Experimental results indicated that molecule size exclusion was not the only parameter affecting the column chromatographic separation efficiency of Al₁₃ but molecule charge as well. Reducing the eluent flow rate, increasing the ionic strength and suitable pH resulted in increase in the separation efficiency. Experimental results clearly indicated that by varying the experimental conditions, it is possible to produce pure Al₁₃ species using a gel column chromatographic technique.     

Characterization and separation of Al13 species using gel-filtration chromatography

A polyaluminum chloride (PAC) sample was prepared using a slow alkaline titration method. The Bio-Gel P-100 gel column chromatographic technique was used to separate and characterize the various forms of aluminum present in the prepared PAC solution. The effluents from a gel column were monitored using online chemical method: Al-Ferron timed complexation spectrophotometry and by ²⁷Al nuclear magnetic resonance (NMR) spectroscopy. Effects of different experimental conditions such as eluent flow rate, ionic strength and pH on separation of Al₁₃ were investigated. Experimental results indicated that molecule size exclusion was not the only parameter affecting the column chromatographic separation efficiency of Al₁₃ but molecule charge as well. Reducing the eluent flow rate, increasing the ionic strength and suitable pH resulted in increase in the separation efficiency. Experimental results clearly indicated that by varying the experimental conditions, it is possible to produce pure Al₁₃ species using a gel column chromatographic technique.     

Interactive effects of ultraviolet-B radiation and temperature on cotton physiology, growth, development and hyperspectral reflectance

Current conditions of 2-11 kJ m(-2) day(-1) of UV-B radiation and temperatures of >30 degrees C during flowering in cotton cultivated regions are projected to increase in the future. A controlled environment study was conducted in sunlit growth chambers to determine the effects of UV-B radiation and temperature on physiology, growth, development and leaf hyperspectral reflectance of cotton. Plants were grown in the growth chambers at three day/night temperatures (24/16 degrees C, 30/22 degrees C and 36/28 degrees C) and three levels of UV-B radiation (0, 7 and 14 kJ m(-2) day(-1)) at each temperature from emergence to 79 days under optimum nutrient and water conditions. Increases in main stem node number and the node of first fruiting branch and decrease in duration to first flower bud (square) and flower were recorded with increase in temperature. Main effects of temperature and UV-B radiation were significant for net photosynthetic rates, stomatal conductance, total chlorophyll and carotenoid concentrations of uppermost, fully expanded leaves during squaring and flowering. A significant interaction between temperature and UV-B radiation was detected for total biomass and its components. The UV-B radiation of 7 kJ m(-2) day(-1) reduced boll yield by 68% and 97% at 30/22 degrees C and 36/28 degrees C, respectively, compared with yield at 0 kJ m(-2) day(-1) and 30/22 degrees C. No bolls were produced in the three temperature treatments under 14 kJ m(-2) day(-1) UV-B radiation. The first-order interactions between temperature, UV-B radiation and leaf age were significant for leaf reflectance. This study suggests a growth- and process-related temperature dependence of sensitivity to UV-B radiation.