0.18 μm部分耗尽绝缘体上硅互补金属氧化物半导体电路单粒子瞬态特性研究

利用脉冲激光入射技术研究100级0.18 μm部分耗尽绝缘体上硅互补金属氧化物半导体反相器链的单粒子瞬态效应, 分析了激光入射器件类型及入射位置对单粒子瞬态脉冲传输特性的影响. 实验结果表明, 单粒子瞬态脉冲在反相器链中的传输与激光入射位置有关, 当激光入射第100级到第2级的n型金属-氧化物-半导体器件, 得到的脉冲宽度从287.4 ps增加到427.5 ps; 当激光入射第99级到第1级的p型金属-氧化物-半导体器件, 得到的脉冲宽度从150.5 ps增加到295.9 ps. 激光入射点靠近输出则得到的瞬态波形窄; 靠近输入则得到的瞬态波形较宽, 单粒子瞬态脉冲随着反相器链的传输而展宽. 入射器件的类型对单粒子瞬态脉冲展宽无影响. 通过理论分析得到, 部分耗尽绝缘体上硅器件浮体效应导致的阈值电压迟滞是反相器链单粒子瞬态脉冲展宽的主要原因. 而示波器观察到的与预期结果幅值相反的正输出脉冲, 是输出节点电容充放电的结果.     

中子单粒子效应研究现状及进展

回顾了中子单粒子研究的国内外发展情况,介绍了近几年西北核技术研究所在西安脉冲堆开展的低能中子单粒子效应研究进展。比较了稳态与脉冲工况下中子单粒子效应的异同性;分析了含有SRAM结构器件随着特征尺寸的减小,中子单粒子效应敏感性加剧的物理机制。分析认为目前中子单粒子效应已成为小尺寸大规模互补金属氧化物半导体器件的主要中子效应表现;中子辐射效应研究中,除了位移损伤效应以外还必需重视由中子电离造成的中子单粒子效应。     

基于FPGA的激光测速仪信号处理方案设计与实现

为满足高动态环境下的激光多普勒测速仪信号处理需要,提出了一种基于现场可编程门阵列（FPGA）的激光测速仪信号处理方案。在FPGA内部完成全部信号处理的内容,利用快速傅里叶变换（FFT）算法得到信号的频谱,利用能量重心法对离散频谱进行校正,开发采样频率自适应算法,兼顾测量准确度与测量范围的要求,最后将结果通过通用串行总线上传个人计算机显示。程序采用流水线方式设计,提高信号处理速度。经过实验验证,数据更新率达到2.4~24 kHz, 数据延迟时间为123~1230 s,测量准确度优于810-4,测量稳定度优于2.510-7。     

Fault tolerant deterministic secure quantum communication using logical Bell states against collective noise

This study proposes two novel fault tolerant deterministic secure quantum communication(DSQC) schemes resistant to collective noise using logical Bell states. Either DSQC scheme is constructed based on a new coding function, which is designed by exploiting the property of the corresponding logical Bell states immune to collective-dephasing noise and collective-rotation noise, respectively. The secret message can be encoded by two simple unitary operations and decoded by merely performing Bell measurements, which can make the proposed scheme more convenient in practical applications.Moreover, the strategy of one-step quanta transmission, together with the technique of decoy logical qubits checking not only reduces the influence of other noise existing in a quantum channel, but also guarantees the security of the communication between two legitimate users. The final analysis shows that the proposed schemes are feasible and robust against various well-known attacks over the collective noise channel.     

Characteristics of Friedel pairs and diffraction contrast tomography with non‐perpendicular rotation axis

The characteristics of Friedel pairs in diffraction contrast tomography (DCT) are studied in the condition that the rotation axis of the sample is not exactly perpendicular to the incident X‐ray direction. For the rotation axis approximately aligned along the vertical direction, the Friedel pairs close to the horizontal plane are insensitive to the non‐perpendicularity of the rotation axis, and can be used to refine the sample‐to‐detector distance and X‐ray energy, while the Friedel pairs close to the vertical direction are sensitive to the non‐perpendicularity of the rotation axis, and can be used to determine the rotation axis orientation. The correct matching proportion of Friedel pairs decreases with increasing non‐perpendicularity of the rotation axis. A method of data processing considering rotation axis misalignment is proposed, which significantly increases the correct matching and indexing proportions of the diffraction spots. A pure aluminium polycrystalline sample is investigated using DCT at beamline 4W1A of Beijing Synchrotron Radiation Facility. Based on the analysis of Friedel pairs, the sample‐to‐detector distance and X‐ray energy are refined to be 8.67 mm and 20.04 keV, respectively. The non‐perpendicular angle of the rotation axis is calculated to be 0.10°. With these refined geometric parameters, the matching proportion of the spatial position of diffraction spots is 90.62%. Three‐dimensional reconstruction of the sample with 13 grains is realised using the algebraic reconstruction technique. It is demonstrated that the precise correction of the orientation of the sample rotation axis is effective in DCT suffering from rotation axis misalignment, and the higher accuracy in determining the rotation axis is expected to improve the reconstruction precision of grains.     

风云三号C星全球导航卫星掩星探测仪首次实现北斗掩星探测

全球导航卫星掩星探测仪(GNOS)是国际首台北斗系统(BDS)和全球定位系统(GPS)双系统兼容掩星探测仪, 2013年9月23日随风云三号卫星C星(FY3 C)发射入轨, 目前已测得大量掩星数据. 介绍了FY3 C-GNOS的组成; 统计了2013年10月12日全天的FY3 C-GNOS掩星事件及其全球分布情况; 通过与GPS精密定轨结果进行对比分析, 测试了BDS在轨实时定位精度, 检验了BDS掩星产品的可靠性和一致性. 初步分析结果表明: 14颗BDS卫星在轨运营的条件下, BDS和GPS兼容掩星探测仪可将掩星事件数提高约33.3%; BDS实时定位平均偏差优于6 m, 标准偏差优于7 m; 5-25 km高度范围内, BDS与GPS内符合精度大气折射率优于2%, 温度优于2 K, 湿度优于1.5 g/kg, 压强优于2%, 电离层峰值密度优于15.6%. GNOS的在轨正常运行及BDS与GPS掩星定位精度及反演产品的一致性为北斗掩星探测的业务化运行奠定了基础.     

用自适应滤波解卷积进行缺陷类型识别

提出了超声缺陷散射回波信号的卷积模型和缺陷散射回波信号的自适应滤波解卷积方法。对一给定系统的模拟,进行了解卷积效果分析.通过解卷积,能够减弱其它因素的影响,突出缺陷的类型(形状)和大小信息。通过对横穿孔、平底孔、球孔和长方孔缺陷的共18个样品的回波信号进行解卷积处理,实现了带棱边的平面与光滑曲面──自然缺陷二要素的类型识别。     

Spectral fitting of NMR spectra using an alternating optimization method with a priori knowledge.

As alternatives to the fast Fourier transform, advanced parametric methods based on the damped sinusoidal data model have been devised to better quantify the nuclear magnetic resonance (NMR) spectroscopy time-domain data. Previously, linear prediction (LP) fitting methods using Householder triangularization and singular value decomposition (SVD) techniques have been applied to the NMR spectroscopy data analysis. In this paper, we propose an alternating optimization method to quantify the time-domain NMR spectroscopy data. The proposed algorithm uses the a priori knowledge of the possible frequency intervals of the damped sinusoids to obtain more accurate parameter estimates when the NMR spectroscopy data are obtained under low signal-to-noise ratio conditions and the peaks are close together. None of the LP and SVD type of methods can use such approximate a priori knowledge. We have shown with measured NMR spectroscopy data that the proposed algorithm can be used to obtain accurate parameter estimates of frequencies, amplitudes, and damping ratios of the damped sinusoids and therefore the ultimate fit of the spectrum by using the a priori knowledge about the possible frequency intervals of the damped sinusoids.     

差动型激光自混合干涉式位移测量系统

提出了一种利用激光自混合干涉效应的差动式位移测量系统, 建立了系统的数学模型,经仿真分析及实验验证表明： 和单激光管结构相比, 该系统位移分辨力提高了二倍, 达 １／４ 光波波长, 且能大大减小光反馈强度引起的噪声及温度干扰。     

光外差-塞曼调制磁旋转光谱技术的线型研究

光外差－塞曼调制磁旋光谱技术是一种高灵敏的吸收光谱技术。它同时对激光频率和样品的塞曼效应进行调制,然后通过双解调来提取微弱的光谱信号。文内导出了该信号的数学表达式,并对影响线型和灵敏度的多种物理参数进行了分析,获得了与实验相符合的结果。