Na2SnO3系催化剂在甲烷氧化偶联反应中的催化性能及表面碱性的探讨

1982年Keller和Bhasin以金属氧化物为催化剂从甲烷制得少量乙烯和乙烷的工作引起了各国研究工作者的重视,此后报道了许多有研究价值的催化剂,其中添加碱金属对提高催化性能所起的作用引起了普遍的关注.Lunsford等首先用添加Li~+的MgO作催化剂,发现催化剂表面碱性增强的同时,生成C_2烃类产物的选择性明显增加.随后Iwamatu等在MgO中添加Na~+及Rb~+盐,Jones等在Mn~(4+)/SiO_2中添加Na~+,Otsuka等在Sm_2O_3中添加LiCl作为甲烷氧化偶联催化剂进行了研究,这些结果均表明,因添加碱金属使催化剂呈现     

La-Ba-Sm体系催化剂上的甲烷氧化偶联

用甲烷氧化偶联反应评价了不同方法制备的Ｌａ－Ｂａ－Ｓｍ体系催化剂，结果表明，用机械混合Ｌａ２Ｏ３，Ｂａ（ＯＨ）２．８Ｈ２Ｏ和Ｓｍ２Ｏ３三组分及高温焙烧方法制备的催化剂，从Ｃ２收率和选择性总体看，较其它方式优越，在催化剂（ＩＶ）上进行了５００ｈ的稳定性实验，在整个过程中，催化剂的活性和选择性基本稳定；催化剂的起动温度较低，在较宽的温度范围内易于控制对工业生产意义较大，通过ＸＲＤ，ＸＰＳ，ＩＲ，ＳＥＭ     

ZnO/p-Si异质结的深能级及其对发光的影响

利用深能级瞬态谱(DLTS)和光致发光谱(PL),研究了ZnO/pSi异质结的两种不同温度(850℃,1000℃)退火下的深能级中心。发现850℃退火的样品存在3个明显的深中心,分别为E₁=E_v+0.21eV,E₂=E_v+0.44eV,E₃=E_v+071eV;而1000℃退火样品仅存在一个E₁=E_v+021eV的中心,且其隙态密度要比850℃退火的大。同时,测量了两个样品的PL谱。发现1000℃退火可消除一些影响发光强度的深能级,对改善晶格结构,提高样品的发光强度有利。     

双重瑞利散射导致的多路干涉噪声对光纤喇曼放大器噪声系数的影响

在没有对喇曼增益分布做任何假设的情况下,利用所推导的光纤喇曼放大器噪声系数的解析表达式,研究了不同光纤长度、不同信号输入功率、不同增益、不同瑞利散射下双重瑞利散射导致的多路干涉噪声对喇曼放大器噪声系数的影响.结果表明随着光纤长度,信号输入功率、喇曼增益和瑞利散射的增加,多路干涉噪声对噪声系数的劣化越严重.但通过合理的优化光纤长度、控制喇曼增益可以取得噪声和增益间的最佳平衡.     

Syntheses,Crystal Structures and Fluorescence Properties of Three Complexes Based on 2,2'-Quinoline-4,4'-dicarboxylic Ligands

Crystallography Reports - Three new coordination complexes, [Mn(L)(H2O)4⋅(H2O)3]2 (1), [Mg(L)(H2O)4⋅(H2O)3]2 (2), and [Cu(L)(phen)⋅(H2O)4]2 (3) (H2L =...     

The Biological Fate of Pharmaceutical Excipient β-Cyclodextrin: Pharmacokinetics,Tissue Distribution,Excretion, and Metabolism of β-Cyclodextrin in Rats

β-cyclodextrin has a unique annular hollow ultrastructure that allows encapsulation of various poorly water-soluble drugs in the resulting cavity, thereby increasing drug stability. As a bioactive molecule, the metabolism of β-cyclodextrin is mainly completed by the flora in the colon, which can interact with API. In this study, understanding the in vivo fate of β-cyclodextrin, a LC-MS/MS method was developed to facilitate simultaneous quantitative analysis of pharmaceutical excipient β-cyclodextrin and API dextromethorphan hydrobromide. The established method had been effectively used to study the pharmacokinetics, tissue distribution, excretion, and metabolism of β-cyclodextrin after oral administration in rats. Results showed that β-cyclodextrin was almost wholly removed from rat plasma within 36 h, and high concentrations of β-cyclodextrin distributed hastily to organs with increased blood flow velocities such as the spleen, liver, and kidney after administration. The excretion of intact β-cyclodextrin to urine and feces was lower than the administration dose. It can be speculated that β-cyclodextrin metabolized to maltodextrin, which was further metabolized, absorbed, and eventually discharged in the form of CO₂ and H₂O. Results proved that β-cyclodextrin, with relative low accumulation in the body, had good safety. The results will assist further study of the design and safety evaluation of adjuvant β-cyclodextrin and promote its clinical development.     

Investigating bottom-quark Yukawa interaction at Higgs factory

Measuring the fermion Yukawa coupling constants is important for understanding the origin of the fermion masses and their relationship with spontaneously electroweak symmetry breaking.In contrast,some new physics(NP)models change the Lorentz structure of the Yukawa interactions between standard model(SM)fermions and the SM-like Higgs boson,even in their decoupling limit.Thus,the precise measurement of the fermion Yukawa interactions is a powerful tool of NP searching in the decoupling limit.In this work,we show the possibility of investigating the Lorentz structure of the bottom-quark Yukawa interaction with the 125 GeV SM-like Higgs boson for future e^+e^- colliders.     

Identification of Pharmacophoric Fragments of DYRK1A Inhibitors Using Machine Learning Classification Models

Dual-specific tyrosine phosphorylation regulated kinase 1 (DYRK1A) has been regarded as a potential therapeutic target of neurodegenerative diseases, and considerable progress has been made in the discovery of DYRK1A inhibitors. Identification of pharmacophoric fragments provides valuable information for structure- and fragment-based design of potent and selective DYRK1A inhibitors. In this study, seven machine learning methods along with five molecular fingerprints were employed to develop qualitative classification models of DYRK1A inhibitors, which were evaluated by cross-validation, test set, and external validation set with four performance indicators of predictive classification accuracy (CA), the area under receiver operating characteristic (AUC), Matthews correlation coefficient (MCC), and balanced accuracy (BA). The PubChem fingerprint-support vector machine model (CA = 0.909, AUC = 0.933, MCC = 0.717, BA = 0.855) and PubChem fingerprint along with the artificial neural model (CA = 0.862, AUC = 0.911, MCC = 0.705, BA = 0.870) were considered as the optimal modes for training set and test set, respectively. A hybrid data balancing method SMOTETL, a combination of synthetic minority over-sampling technique (SMOTE) and Tomek link (TL) algorithms, was applied to explore the impact of balanced learning on the performance of models. Based on the frequency analysis and information gain, pharmacophoric fragments related to DYRK1A inhibition were also identified. All the results will provide theoretical supports and clues for the screening and design of novel DYRK1A inhibitors.     

Noninvasive generation and measurement of propagating waves in arterial walls

Arterial wall stiffness can be associated with various diseases. Arteriosclerosis involves the buildup of plaques within artery walls that stiffen the arteries. The stiffness of an artery can be assessed by measurement of the pulse wave velocity (PWV). Usually, PWV is estimated using the foot-to-foot method. However, the foot of the pressure wave is not very clear due to reflected waves. Also, the blood pressure wave generated by the heart is normally a low frequency wave, hence the time resolution is low. PWV is an average indicator of artery stiffness between the two measuring positions, and therefore cannot easily identify local stiffness. In this paper a force on the arterial wall is generated noninvasively by the radiation force of ultrasound. Techniques for measuring the propagating wave due to this localized force are studied. The excitation force can be either a very short pulse or a modulated cw signal of a few hundred hertz. The temporal resolution of this method, which is in the range of microseconds, is much higher than the conventional pressure PWV method, and therefore allows the wave velocity to be measured accurately over short distances of a few millimeters.