SYNTHESIS OF MESOPOROUS POLY(STYRENE-co-MALEIC ANHYDRIDE)/SILICA HYBRID MATERIALS VIA A NONSURFACTANT-TEMPLATED SOL-GEL PROCESS*

Mesoporous poly (styrene-co-maleic anhydride)/silica hybrid materials have been prepared. The synthesis wasachieved by the HCl-catalyzed sol-gel reactions of tetraethyl orthosilicate (TEOS) and styrene-maleic anhydride copolymerin the presence of 3-aminopropyl triethoxysilane (APTES) as a coupling agent and citric acid as a nonsurfactant template orpore-forming agent, followed by ethanol extraction. Characterization results from nitrogen sorption isotherms and powder X-ray diffraction indicate that polymer-modified mesoporous materials with large specific surface areas (e.g. 900 m~2/g) andpore volumes (e.g. 0.6 cm~3/g) could be prepared. As the citric acid concentration is increased, the specific surface areas, porevolumes and pore diameters of the hybrid materials increase.     

The evolution of morphology of ordered porous TiO2 films fabricated from sol-gel method assisted ZnO nanorod template

Ordered porous TiO₂ films, including TiO₂ nanotube arrays, are fabricated by a sol-gel dip-coating approach via ZnO nanorod templates obtained from aqueous solution approach. The results indicate that the morphologies of ordered porous TiO₂ films have been great affected by the sol-gel dip-coating cycle number. Open-ended TiO₂ nanotube arrays can be obtained in optimum dip-coating cycle numbers. The TiO₂ nanotubes with the inner diameter matching well with the diameters of ZnO nanorods, are well assembled and separate each other. When the cycle number is less than this optimum value, no intact porous TiO₂ film can be obtained. As the cycle number is larger than this optimum value, an ordered porous TiO₂ film with many throughout holes is formed. The evolutive mechanism of ordered porous TiO₂ films is proposed.     

NMR频率综合器的微机控制

为实现ＰＴＳ系列频率综合器的微机控制，设计了一种简单的控制电路。在微机的控制下，通过该电路与微机的并行通讯口，用Ｃ语言编写的控制程序可以很方便的控制频率综合器的输出频率。控制程序采用菜单操作，电路所需的＋５Ｖ电源由微机提供，整个控制系统简单实用，值得推广。     

Hydrogen adsorption on zigzag (8,0) boron nitride nanotubes

The chemical adsorption of H atoms on an (8,0) zigzag boron nitride nanotube is studied using the density functional theory with the supercell method. One to four H atoms per 32 B and 32 N are considered. The results show that H atoms prefer to adsorb on the top sites of adjacent B and N atoms to form an armchair chain along the tube axis. An even-odd oscillation behavior of the adsorption energy of H atoms on the tube is found, and the average adsorption energy of even H atoms is obviously bigger than that of odd H atoms. The results can be understood with the frontier orbital theory. Based on this adsorption behavior, several high-symmetric structures of H adsorbed boron nitride nanotubes with 50% and 100% coverages are studied. The pairs of lines' pattern with 50% coverage has the biggest average adsorption energy per H(2) among the chosen configurations, corresponding to approximately 4 wt % hydrogen storage.     

三溴偶氮胂催化光度法测定痕量铁

本文研究了硫酸介质中痕量 Fe(Ⅲ)催化加速抗坏血酸、溴酸钾和三溴偶氮胂之间的褪色反应及动力学条件,建立了动力学光度法测定痕量Fe(Ⅲ)的新方法.方法灵敏度为1.82×10~(-12)g·ml~(-1).测定范围为Fe(Ⅲ)0～30ng/25ml.已用于人发和食品中痕量铁的测定.结果满意.     

EFFECT OF MOLECULAR WEIGHT OF PDMS ON MORPHOLOGY AND MECHANICAL PROPERTIES OF PP/PDMS BLENDS

 A series of polydimethylsiloxane (PDMS) with varied molecular weights (Mw = 3  106, 1  106 and 0.5  106) were melt blended with PP to investigate the effect of PDMS molecular weight (MW) on the morphology and mechanical properties of PP/PDMS blends. Scanning electron microscopic (SEM) examination showed that the size of PDMS domains was dependent on the MW of PDMS. It was found that the lower the value of PDMS MW, the better dispersion of the PDMS domains in the PP matrix. Tensile and Izod impact tests revealed that the addition of PDMS with lower MW would lead to a more significant increase in impact strength of the blends compared with the blends with higher MW ones, while the influence of the molecular weight on tensile strengths of the blends was relatively small in the MW range studied. Differential scanning calorimetry (DSC) results also showed that the crystallization temperature of PP was increased with decreasing PDMS MW, indicating a better nucleation capability of lower MW of PDMS. Melting flow rate (MFR) measurements indicated that the processibility of PP could be enhanced by adding PDMS, and again the lower MW PDMS resulted in better data. Our work demonstrates that not only the processibility but also the mechanical properties of PP could be enhanced to a more significant degree by using low MW PDMS than the higher ones.     

水热合成CdS纳米晶体的形貌控制研究

研究了水热合成CdS纳米晶体形貌的化学控制，选择不同的络合试剂为模板,研究其对水热合成CdS纳米晶体形貌的影响.实验发现若以络合试剂乙二胺、甲胺为模板时，产品CdS晶体的形貌分别为（20～30） nm×（200～600） nm和（40～50） nm×（200～600） nm尺寸的纳米棒;而以络合试剂吡啶、 氨为模板时，产品CdS晶体的形貌分别为平均尺寸约30 nm和20 nm的纳米颗粒.用XRD、TEM、XPS、PL和Raman光谱等技术对所得CdS纳米棒进行了表征.同时对水热合成CdS纳米晶体形貌的模板控制机制进行了探讨，提出了一种水热合成CdS纳米棒的络合物结构诱导生长机理.     

二氧化碳同环氧丙烷交替共聚用催化剂的研究

探讨了有机金属催化剂的组成及其对二氧化碳同环氧丙烷交替共聚产物结构的影响,发现二乙基锌—助剂体系的催化活性按如次顺序递降:二乙基锌—连苯三酚>二乙基锌—间苯二酚>二乙基锌—对苯二胺>二乙基锌—亚乙基脲。若用三异丁基铝代替二乙基锌同连苯三酚构成催化剂,则失去对二氧化碳同环氧丙烷交替共聚反应的活性同时,著者发现二乙基锌—二元芳胺催化体系与二乙基锌—二元酚催化体系的催化活性规律完全不同。