拉曼光谱在血红蛋白结构及功能研究中的应用进展

血红蛋白发挥多种重要生理功能,但对其结构及功能的认识尚不能满足疾病诊治的需求。拉曼光谱在血红蛋白结构及功能研究中具有很大应用潜力,不但可以检测血红蛋白中血红素及其周围分子结构变化,还可以反映血红蛋白反应动力学具体过程。同时,血红蛋白拉曼光谱在疾病状态下异常血红蛋白检测,血氧饱和度定量测定及血液代用品的高铁血红蛋白含量检测中突显优势。本文综述了拉曼光谱在血红蛋白结构及功能领域中的研究,简述了拉曼光谱在一些病变血红蛋白诊断中的研究进展,分析了影响血红蛋白拉曼光谱检测的因素,以促进拉曼光谱技术在血红蛋白结构和功能研究中的应用。     

基于二维材料MXene的仿神经突触忆阻器的制备和长/短时程突触可塑性的实现

兼具长时程可塑性与短时程可塑性的电子突触被认为是类脑计算系统的重要基础.将一种新型二维材料MXene应用到忆阻器中,制备了基于Cu/MXene/SiO_2/W的仿神经突触忆阻器.结果表明, Cu/MXene/SiO_2/W忆阻器成功实现了稳定的双极性模拟阻态切换,同时成功模拟了生物突触短时程可塑性的双脉冲易化功能和长时程可塑性的长期增强/抑制行为,其中双脉冲易化的易化指数与脉冲间隔时间相关. Cu/MXene/SiO_2/W忆阻器的突触仿生特性,归功于MXene辅助的Cu离子电导丝形成与破灭的类突触响应机理.由于Cu/MXene/SiO_2/W忆阻器兼具长时程可塑性与短时程可塑性,其在突触仿生电子学和类脑智能领域将会具有巨大的应用前景.     

具有高阈值电压和大栅压摆幅的常关型槽栅AlGaN/GaN金属氧化物半导体高电子迁移率晶体管

介绍了一种具有高阈值电压和大栅压摆幅的常关型槽栅AlGaN/GaN金属氧化物半导体高电子迁移率晶体管。采用原子层淀积(ALD)方法实现Al₂O₃栅介质的沉积。槽栅常关型AlGaN/GaN MOS-HEMT的栅长(L_g)为2 μm,栅宽(W_g)为0.9 mm(0.45 mm×2),栅极和源极(L_gs)之间的距离为5 μm,栅极和漏极(L_gd)之间的距离为10 μm。在栅压为－20 V时,槽栅常关型AlGaN/GaN MOS-HEMT的栅漏电仅为0.65 nA。在栅压为+12 V时,槽栅常关型AlGaN/GaN MOS-HEMT的栅漏电为225 nA。器件的栅压摆幅为－20~+12 V。在栅压V_gs=+10 V时,槽栅常关型AlGaN/GaN MOS-HEMT电流和饱和电流密度分别达到了98 mA和108 mA/mm (W_g=0.9 mm), 特征导通电阻为4 mΩ·cm²。槽栅常关型AlGaN/GaN MOS-HEMT的阈值电压为+4.6 V,开启与关断电流比达到了5×10⁸。当V_ds=7 V时,器件的峰值跨导为42 mS/mm (W_g=0.9 mm,V_gs=+10 V)。在V_gs=0 V时,栅漏间距为10 μm的槽栅常关型AlGaN/GaN MOS-HEMT的关断击穿电压为450 V,关断泄露电流为0.025 mA/mm。     

Photoinduced Oxidation Reaction of Benzotrifluoride with OH Radical by the Laser Flash Method

The optical transient and kinetics characterizations of the transients formed in the reaction of OH with benzotrifluoride (BTF) were performed by a laser flash photolysis technique. The results indicated that the formation of π‐type adduct of C₆H₅(OH)CF₃ was the major reaction channel, and the δ‐type adduct of C₆H₅CF₃OH formation was an additional minor process in the oxidation reaction of BTF attacked by OH radicals yielded from the photolysis of H₂O₂. Addition of OH to the CF₃ group led to the fluoride ion elimination to yield α,α‐difluorophenylcarbinol (C₆H₅CF₂OH). Trifluoromethylphenol (HOC₆H₄CF₃) of meta‐, para‐ and ortho‐substituted isomers resulted from the addition of OH to the BTF aromatic ring.     

Biodegradable Sodium Alginate/Carrageenan/Cellulose Composite Hydrogel Wound Dressings Containing Herbal Extracts for Promoting Blood Coagulation and Wound Healing

Accelerating the coagulation process and preventing wound infection are major challenges in the wound care process. Therefore, new multifunctional wound dressings with procoagulant, antibacterial, and antioxidant properties have enormous potential for clinical application. In this work, biodegradable hydrogels containing herbal extracts are prepared for wound dressings. First, the active ingredients are extracted from Amaranthus spinosus (A. spinosus) and Rubia cordifolia (R. cordifolia) and added to the hydrogels prepared from microcrystalline cellulose (MCC), carrageenan, and sodium alginate. Then the composite hydrogels are air-dried to obtain the wound dressings. The wound dressings prepared in this work have good biocompatibility and moisture retention. The mechanical properties of the wound dressings are further improved with the addition of MCC. Besides, the wound dressings have excellent procoagulant, antibacterial, and antioxidant properties due to the presence of R. cordifolia extract. Overall, the most effective group of wound dressings with different ingredient formulations reduces clotting time by 75% and largely inhibits bacterial growth. The wound dressings perform well in the animal wound models to promote wound healing. These results indicate that the hydrogel wound dressings prepared in this work have great potential for medical applications.     

Electro-optic crosslinkable chromophores with ultrahigh electro-optic coefficients and long-term stability

The development of organic electro-optic materials with ultrahigh electro-optic coefficients and high long-term alignment stability is the most challenging topic in this field. Next-generation crosslinkable nonlinear optical chromophore molecular glasses were developed to address this problem. A highly stable EO system including crosslinkable binary chromophores QLD1 and QLD2 or crosslinkable single chromophore QLD3 and multichromophore QLD4 with large hyperpolarizability was synthesized using tetrahydroquinoline as the donor. When the temperature continues to rise after poling, the chromophores modified with anthracene and acrylate can undergo Diels–Alder crosslinking reaction to fix the oriented chromophores through chemical bonds. After crosslinking, the QLD1/QLD2 and QLD2/QLD4 films achieved very high maximum r₃₃ values of 327 and 373 pm V⁻¹, respectively, which are the highest values reported for crosslinkable chromophore systems. After Diels–Alder cycloaddition, the glass transition temperature of the EO film increased by ∼90 °C to 185 °C, which is higher than for any other pure chromophore films. After being annealed at 85 °C, 99.63% of the initial r₃₃ value could be maintained for over 500 h. The ultrahigh electro-optic activity and high long-term alignment stability of these materials showed new breakthroughs in organic EO materials for practical device explorations.

Ultrahigh electro-optic activity and high long-term alignment stability were achieved with crosslinkable binary chromophores QLD1 and QLD2 or crosslinkable single chromophore QLD3 and multichromophore QLD4 with large hyperpolarizability using tetrahydroquinoline as the donor.     

BiBr3-initiated tandem addition/silyl-Prins reactions to 2,6-disubstituted dihydropyrans

A tandem addition/silyl-Prins reaction efficiently affords cis-2,6-disubstituted dihydropyrans (DHPs) using 5 mol % of BiBr3 in CH2Cl2. The reaction occurs between delta-triethylsilyloxyvinyltrimethylsilanes and a variety of aldehydes to give good to excellent isolated yields of DHPs. The diastereoselectivities in the crude products are significantly affected by aldehyde substitution with electron-rich aldehydes, providing 2-3:1 (cis:trans) and neutral (or electron-poor) aldehydes affording dr > or = 19:1 (cis:trans).     

Preparation and evaluation of a lysine-bonded silica monolith as polar stationary phase for hydrophilic interaction pressurized capillary electrochromatography

A silica-based monolith as polar stationary phase was described for hydrophilic interaction pressurized capillary electrochromatography (HI-pCEC). The polar monolithic column was prepared by on-column reaction of lysine with epoxy groups on a gamma-glycidoxypropyltrimethosysilane-modified silica monolith. The stationary phase yielded strong hydrophilic interaction due to the slightly polar hydroxyl groups, and the strong polar lysine ligand with amino groups and carboxylic groups contained on the surface of the monolith. In order to evaluate the hydrophilic character of lysine ligand, the chromatographic behaviors of epoxy monolith (before lysine bonded) and diol monolith (hydroxyl groups contained) were also investigated. Two groups of comparative experiment were developed in terms of the separation of typical neutral non-polar and polar compounds performed in a mobile phase of aqueous-acetonitrile solution. Results showed that the lysine monolith was much more hydrophilic than the diol monolith, which presented less hydrophobic than the epoxy monolith. For further study on its hydrophilic character, the lysine monolith was demonstrated in the HI-pCEC mode for the separations of various polar compounds such as phenols, nucleic acid bases and nucleosides.     

Red phosphorescent organic light-emitting diodes based on a novel host material with thermally activated delayed fluorescent properties

High cost of phosphors and significant efficiency roll-off at high brightness are the two main factors that limit the wide application of phosphorescent organic light-emitting diodes (PHOLEDs). Efforts have been paid to find ways to reduce the phosphors’ concentration and efficiency roll-off of PHOLEDs. In this work, we reported red emission PHOLEDs with low dopant concentration and low efficiency roll-off based on a novel host material 2,4-biscyanophenyl-6-(12-phenylindole[2,3-a]carbazole-11-yl)-1,3,5-triazine (BCPICT), with thermally activated delayed fluorescent(TADF) properties. The device with 1.0% dopant concentration displayed a maximum external quantum efficiency of 10.7%.When the dopant concentration was increased to 2.0%, the device displayed a maximum external quantum efficiency of 10.5% and a low efficiency roll-off of 5.7% at 1000 cd/m2.     

Comparative study on composition, structure, and adsorption behavior of activated carbons derived from different synthetic waste polymers

The composition, structure, and adsorption behavior of activated carbons (ACs) derived from three different types of waste polymers, i.e., tire rubber (TR), polyvinyl chloride (PVC), and polyethyleneterephtalate (PET), by KOH activation were compared. The AC derived from PET exhibited the largest surface area (2831 m(2)/g) and pore volume (1.68 cm(3)/g) due to the homogenous aromatic composition of PET. The AC derived from PVC exhibited relatively lower surface area (2666 m(2)/g) but more narrowed pore size distribution (2-3 nm). The complex composition and high ash content of tire particles resulted in AC product with significantly lower surface area (398.5 m(2)/g) and heterogeneous pore width. Adsorption data of methylene blue (MB) were fitted well by Langmuir equation, indicating monolayer coverage on the ACs. The high oxygen content of PET-derived AC heavily affected its adsorption to MB and iodine. Due to the remarkable surface area and highly mesoporous structures, ACs based on both PET and PVC exhibited much higher adsorption capacities than that of TR and commercial coal-based AC (F400). This study demonstrates that the properties of ACs are highly dependent on their starting polymers and the potential of converting synthetic polymer waste into effective adsorbents for environmental remediation and cleanup.