Catalytic removal of soot particles over MnCo<Subscript>2</Subscript>O<Subscript>4</Subscript> catalysts prepared by the auto-combustion method

Soot removal for exhaust gas from diesel engine has been addressed due to the more stringent legislation and environmental concerns. MnCo₂O₄ catalysts were systematically prepared using glucose as a fuel via the auto-combustion method and applied for soot removal. The as-prepared samples were characterized by X-ray diffraction (XRD), O₂-temperature-programmed oxidation (TPO) reaction and H₂-temperature-programmed reduction reaction (H₂-TPR). The catalytic activities for soot combustion were evaluated by micro activity test (MAT) with a tight contact mode between soot and catalysts. Compared with catalysts prepared by the solid state method without glucose, auto-combustion method in the presence of glucose can decrease the synthetic temperature, avoiding high temperature treatment and sintering. The catalysts prepared with glucose could catalyze soot oxidation effectively and the derived values of T₁₀, T₅₀, and T₉₀ were 326, 408, and 468 °C in a tight contact mode, respectively, showing a significant drop of T₁₀, T₅₀, and T₉₀ by 156, 177, and 178 °C for non-catalytic reaction.     

An In situ Study on the Orderly Crystal Growth of Pluronic F127 Block Copolymer Blended with and without Ionic Liquid during Isothermal Crystallization

Isothermal crystallization behavior of Pluronic F127 blended with and without an ionic liquid (IL) was investigated by in situ polarized optical microscopy (POM) and Fourier transform infrared spectroscopy (FTIR). For the pure F127, the POM and FTIR results showed that the spherulite size and crystallinity of F127 increased with the melting temperature increasing to 60, 80, and 135°C. This could be explained by the flexibility of the polymer chain at high melting temperatures. For the F127 blended with IL, the POM results showed that the morphology of F127 evolved from spherulite to dendritic segregation and fibrous crystal with the increasing IL content. FTIR results indicated that hydrogen bonds were formed between F127 and IL, and the intensity of the hydrogen bonds became strengthened gradually with increasing IL content. The effect of hydrogen bonds on the morphology evolution of F127/IL is discussed.     

Direct determination of mercury in cosmetic samples by isotope dilution inductively coupled plasma mass spectrometry after dissolution with formic acid

A new method was proposed for the accurate determination of mercury in cosmetic samples based on isotopic dilution (ID)-photochemical vapor generation (PVG)-inductively coupled plasma mass spectrometry (ICP MS) measurement. Cosmetic samples were directly dissolved in formic acid solution and subsequently subjected to PVG for the reduction of mercury into vapor species following by ICP MS detection. Therefore, the risks of analyte contamination and loss were avoided. Highly enriched ²⁰¹Hg isotopic spike is added to cosmetics and the isotope ratios of ²⁰¹Hg/²⁰²Hg were measured for the quantitation of mercury. With ID calibration, the influences originating from sample matrixes for the determination of mercury in cosmetic samples have been efficiently eliminated. The effects of several experimental parameters, such as the concentration of the formic acid, and the flow rates of carrier gas and sample were investigated. The method provided good reproducibility and the detection limits were found to be 0.6 pg mL⁻¹. Finally, the developed method was successfully applied for the determination of mercury in six cosmetic samples and a spike test was performed to verify the accuracy of the method.     

11.2% Efficiency all-polymer solar cells with high open-circuit voltage

Herein,we fabricated all-polymer solar cells(all-PSCs)based on a fluorinated wide-bandgap p-type conjugated polymer PM6 as the donor,and a narrow bandgap n-type conjugated polymer PZ1 as the acceptor.In addition to the complementary absorption and matching energy levels,the optimized blend films possess high cystallinity,predominantly face-on stacking,and a suitable phase separated morphology.With this active layer,the devices exhibited a high V_(oc)of 0.96 V,a superior J_(sc)of 17.1 mA cm~(-2),a fine fill factor(FF)of 68.2%,and thus an excellent power conversion efficiency(PCE)of 11.2%,which is the highest value reported to date for single-junction all-PSCs.Furthermore,the devices showed good storage stability.After 80 d of storage in the N_2-filled glovebox,the PCE still remained over 90%of the original value.Large-area devices(1.1 cm~2)also demonstrated an outstanding performance with a PCE of 9.2%,among the highest values for the reported large-area all-PSCs.These results indicate that the PM6:PZ1 blend is a promising candidate for scale-up production of large area high-performance all-PSCs.     

Chemical constituents from Epimedium koreanum Nakai and their chemotaxonomic significance

In this study, 21 compounds were isolated from the aerial parts of Epimedium koreanum Nakai, including 6 phenols (1–5 and 10), 4 lignans (6–9) and 11 flavonoids (11–21). The chemical structures of those isolates were established after extensive one-and two-dimensional nuclear magnetic resonance and mass spectroscopy analyses. This is the first report of compounds 2, 3, 4 and 9 in E. koreanum and of compounds 5 and 7 in the family Berberidaceae. The chemotaxonomic significance of the isolated compounds is discussed.     

Self‐assembly of Carbon Particles as a Heat Sink Coating to Promote Radiative Cooling

Novel composite carbon particles are developed that can self‐assemble as a coating on a substrate without a binder. These carbon particles were used as a coating to enhance thermal dissipation and their thermal conductivity, surface emissivity and cooling performance were measured. Carbon particles with both thiol and epoxy functional groups self‐assembled to form a coating on the surface of a heat sink without a binder, which greatly improved the thermal conductivity of the coating. Coating a heat sink with the carbon particles yielded a higher thermal conductivity and emissivity than could be obtained with the addition of binder in the conventional approach, and significantly enhanced the cooling performance. In addition, the cooling performance of the carbon nanotube outperformed all other particles when coated on a substrate, because it had the highest thermal conductivity and good radiation emissivity. We developed an equation to describe the various parameters affecting the cooling performance of the thermally dissipative coating. This equation was confirmed by the experimental data.     

Preparation and evaluation of a novel molecularly imprinted SPE monolithic capillary column for the determination of auramine O in shrimp

A novel method combining molecular imprinting and SPE was developed in a capillary column for the determination of auramine O in shrimp. The capillary monolithic column was prepared by UV‐initiated in situ polymerization, using auramine O as template and methacrylic acid and ethylene dimethacrylate as functional monomer and cross‐linker, respectively. The properties of the prepared capillary monolithic column were investigated under the optimized conditions coupled with HPLC, and then the morphologies of the inner polymers were characterized by SEM. The calibration curve was expressed as A = 103C + 19.8 (r = 0.9992) with a linear range of 0.25–25.0 μg/mL, and the recoveries of auramine O at different concentrations in shrimp ranged from 90.5 to 92.4% with RSDs ranging from 2.1 to 4.4%. The capacities of the molecularly imprinted polymer and nonimprinted polymer columns were 0.722 and 0.147 μg/mg, respectively, and the LOD (S/N = 3) of auramine O in shrimp was 17.85 μg/kg. Under the selected conditions, the enrichment factors obtained were higher than 70‐fold. The results indicate that the prepared molecularly imprinted capillary monolithic column was reliable and applicable to the analysis of auramine O in shrimp.     

用鲁米诺-KIO4-Fe(1, 10-phen)32+体系的化学发光法测定痕量铁

本文利用鲁米诺-KIO₄-Fe(1,10-phen)₃²⁺配合物体系产生化学发光反应,建立了测定痕量铁的新的化学发光分析方法.该法以1,10-phen为配位体,铁的检出限为1.6×10^-7g/L,工作曲线响应浓度范围在1×10^-5-1×10^-3g/L.在测定2×10^-4g/L铁的相对标准偏差为3.5%.用于检测工业沉淀BaSO₄中痕量铁获得满意结果.     

Large Nonlinear Optical Activity of a Near-infrared-absorbing Bithiophene-based Polymer with a Head-to-head Linkage

Although the production of near-infrared (NIR)-absorbing organic polymers with an excellent nonlinear optical (NLO) response is vital for various optoelectronic devices and photodynamic therapy, the molecular design and relevant photophysical investigation still remain challenging. In this work, large NLO activity is observed for an NIR-absorbing bithiophene-based polymer with a unique head-to-head linkage in the NIR region. The saturable absorption coefficient and modulation depth of the polymer are determined as ∼−3.5×10⁵ cm GW⁻¹ and ∼32.43%, respectively. Notably, the polymer exhibits an intrinsic nonlinear refraction index up to ∼−9.36 cm² GW⁻¹, which is six orders of magnitude larger than that of CS₂. The maximum molar-mass normalized two-photon absorption cross-section (σ₂/M) of this polymer can be up to ∼14 GM at 1200 nm. Femtosecond transient absorption measurements reveal significant spectral overlap between the 2PA and excited state absorption in the 1000–1400 nm wavelength range and an efficient triplet quantum yield of ∼36.7%. The results of this study imply that this NIR-absorbing polymer is promising for relevant applications.