Synthesis and characterization of degradable hyperbranched poly(2‐ethyl‐2‐oxazoline)

Hyperbranched poly(2‐ethyl‐2‐oxazoline) was synthesized by a combination of cationic ring‐opening polymerization and the oxidation of thiol to disulfide groups. A three‐arm star poly(2‐ethyl‐2‐oxazoline) (PEtOx) was first synthesized using 1,3,5‐tris(bromomethyl) benzene as an initiator. The star PEtOx was end‐capped with potassium ethyl xanthate. Similarly, a linear PEtOx was synthesized and end‐capped with potassium ethyl xanthate using benzyl bromide as an initiator. Hyperbranched PEtOx was then obtained by in situ cleaving and subsequent oxidation of the star PEtOx and linear PEtOx mixture with n‐butylamine as both a cleaving agent and a base in tetrahydrofuran. The linear PEtOx was used to prevent the formation of gel. The hyperbranched PEtOx can be cleaved with dithiothreitol to trithiol and monothiol polymer. The hyperbranched PEtOx shows no remaining thiols using Ellman's assay. The resulting hyperbranched PEtOx was hydrolyzed to a novel hyperbranched polyethyleneimine with degradable disulfide linkages. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2030–2037     

An Intrinsic Photothermal Liquid for Light Detection and Energy Storage

Photothermal materials (PTMs) have been intensively investigated in the fields of photothermal conversion. Superior to solid PTMs, liquid PTMs are leading the trends in satisfying the demands of high flexibility and easy recycling. Successful examples of liquid PTMs are mostly formulated by dispersing solid PTMs in solvents, but suffer from the problems of phase segregation and solvent pollution. In this work, a low-cost formulation is proposed, which involves an oxidative product of ethyl oleate by iodine. It is an intrinsic liquid PTM, preserving the fluidic nature as well as possessing considerable ability for photothermal conversion. In addition to understanding the mechanism of light absorption in the visible and even near infrared windows, two examples are presented to demonstrate the great potential of liquid PTMs in broad areas such as light sensing and energy storage.     

环丙烷衍生物的简便合成

报道了4-甲氧基．2-溴代丁烯内酯(4)与几种醇通过串联的双。Michael加成及分子内的亲核取代反应，简便地得到了环丙烷类化合物8。经元素分析、IR、^1HNMR、^13CNMR和MS对目标产物进行了结构表征，其中8a通过单晶培养和x射线晶体测定，确定了它的立体结构。     

血中苯妥英钠和苯巴比妥钠的高效毛细管电泳优化分析

建立了血中的苯妥英钠和苯巴比妥钠的胶束电动毛细管电泳分析方法（ＭＥＫＣ）。以２５ｍｍｏｌ／Ｌ硼酸钠溶液（ｐＨ＝８．６０）、３０ｍｍｏｌ／Ｌ十二烷基硫酸钠（胶束相）和甲醇３０％（φ）为缓冲液,恒定电压２５ｋＶ（电流３０～３５μＡ）,检测波长２００ｎｍ,毛细管柱长３７ｃｍ。苯妥英钠和苯巴比妥钠两种药物质量浓度的线性范围为１．０～８０ｍｇ／Ｌ,最低检出质量浓度为１．０ｍｇ／Ｌ。该法为临床提供了一种高效、快速的血中药物含量定量测定的新手段     

Ignition and burning behaviors of automobile oil in engine compartment

Accidental leakage of automobile oils is of great inclination to initiate pool fires in engine compartment, with threats to induce the flashover of other components and flame penetration into the passenger compartment. This paper presents experimental results of the ignition and burning behaviors of a kind of automobile oils (automatic transmission oil) using a cone calorimeter. Measurements of oil temperature, ignition time, mass loss and heat release rate are performed at different external heat fluxes and initial fuel depths. The comparison between experimental and numerical oil temperature evolutions shows that the variations of the ignition time at different experimental conditions depend on the heat dissipation process inside the liquid phase. The steady mass burning rate is nearly independent of initial fuel depth and has a linear relation with external heat fluxes. In addition, the results indicate an increase in peak heat release rate by a large margin initially, followed by a relatively small margin under thicker initial fuel depths, while its variations are proportional to external heat fluxes. Correlations are also developed to determine the peak heat release rate as a function of the initial fuel depth.

     

TBN as a metal-free reagent initiated sp3 C–H functionalization of glycine esters: Synthesis of quinoline-2-carboxylate esters

As a metal-free reagent, tert-butylnitrite (TBN) initiated aerobic sp³ C–H bond oxidation of glycine esters was achieved, providing a series of quinoline-2-carboxylates in good yields. The mechanistic investigation revealed that in the presence of molecular oxygen, TBN derived radicals were involved in the C–H bond oxidation and the terminal aromatization.     

Fe~(3+)对淀粉/聚乙烯共混物促降解的研究

本文选用Fe3 + 油酸的组合物为降解剂 ,研究它与淀粉、聚乙烯共混体系在模拟堆肥温度 (70℃ )下的热氧化降解行为 ,对其力学性能、分子量下降率及氢过氧化物浓度进行跟踪测试 ,并通过扫描电子显微镜(SEM )及X 射线衍射仪 (XRD)对试样的表面形态和结晶性能进行表征 .实验结果表明 :含有Fe3 +的有机化合物降解剂在实验条件下对试样有明显的促降解作用 ,并且高Fe3 +含量的降解剂催化PE基体降解活性的发挥受环境因素特别是氧气浓度高低的影响不敏锐 ,而低Fe3+含量的降解剂则与之相反 .在上述实验事实的基础上推导出该体系中聚乙烯热氧化降解的动力学方程式 .     

光合反应中心原初电子转移机理的理论研究

用量子化学密度泛函B3LYP方法在3-21G水平上计算细菌光合反应中心原初电子给体P960和绿色植物PSⅡ光合反应中心原初电子给体P680的电子结构,然后研究轴向配位的组氨酸残基和周围蛋白质环境的影响,最后探讨其原初电子转移机理。计算结果表明：(1)细菌光合作用反应中心原初电子给体P960-h的HOMO主要是由与M分支相连的组成单元上原子的原子轨道组成,而它的LUMO则两个组成单元上原子的原子轨道都有贡献;PSⅡ反应中心中原初电子给体P680的HOMO和LUMO均主要由与D1蛋白相连的组成单元上原子的原子轨道组成。这些计算结果能够从反应中心最核心的部分-原初电子给体的电子结构方面解释Rps.uiridis反应中心和PSⅡ反应中心原初电子转移只沿一个分支进行的的途径选择性。(2)虽然与细菌反应中心原初电子给体超分子P960的两个细菌叶绿素分子形成轴向配位的组氨酸残基His并未参与超分子P960-h的HOMO和LUMO的组成,但是由于其轴向配位,使得P960-h的ELUMO显著地升高到高于辅助细菌叶绿素和去镁细菌叶绿素的相应值,使得原初电子转移反应能够顺利进行。否则原初电子转移反应很难进行。PSⅡ反应中心的情况,与细菌反应中心十分相似。(3)细菌反应中心辅助细菌叶绿素(ABChlb)中的Mg离子与最近的组氨酸残基His中的N原子的距离和原初电子给体P960中的相应的Mg-N的距离相似,因此同样应该考虑此轴向配位的组氨酸残基,此时原初电子转移反应是沿L分支从P960-h经ABChlb到去镁细菌叶绿素(BPheob)的两步电子转移过程。而PSⅡ反应中心的辅助叶绿素不存在His的轴向配位,这应是与细菌反应中心的重要区别之一,此时原初电子转移应是沿Dl分支从P680-h到Pheoa的一步电子转移过程,但同时也不能完全排除从P680-h到AChla到Pheoa的二步电子转移过程。     

气态污染物氯化氰的分光光度法测定

探索了氯化氰（CNCI）气体在不同介质中的稳定性和可吸收性,及光度测定条件,方法用于三聚氯氰工厂烟道气、车间空气及厂区空气中CNCI含量的测定。 结果满意。     

氢气在炭狭缝微孔内吸附的预测

通过边界的平均场近似,推导二平板狭缝孔格子理论Ono-Kondo吸附等温方程.利用格子气模型特性和微观物理学理论,计算氢分子在石墨平面的最大吸附容量.比较由氢分子在石墨平面二典型聚集状态标定的Ono-Kondo方程,并用预测精度较高的方程计算了与文献相同条件下的吸附等温线.在比较了计算结果、试验结果和GCMC分子模拟结果后,对Ono-Kondo吸附等温方程的特点、理论基础作了分析,指出了方程的适用范围.