Regioselective Amine–Borane Cyclization: Towards the Synthesis of 1,2‐BN‐3‐Cyclohexene by Copper‐Assisted Triazole/Gold Catalysis

The combination of triazole/gold (TA‐Au) and Cu(OTf)₂ is identified as the optimal catalytic system for promoting intramolecular hydroboration for the synthesis of a six‐membered cyclic amine–borane. Excellent yields (up to 95 %) and regioselectivities (5‐exo vs. 6‐endo) were achieved through catalyst control and sequential dilution. Good functional‐group tolerance was attained, thus allowing the preparation of highly functionalized cyclic amine–borane substrates, which could not be achieved using other methods. Deuterium‐labeling studies support the involvement of a hydride addition to a gold‐activated alkyne with subsequent C?B bond formation.     

Generation of Oxazolidine‐2,4‐diones Bearing Sulfur‐Substituted Quaternary Carbon Atoms by Oxothiolation/Cyclization of Ynamides

A novel method for metal‐free oxothiolation of ynamides to construct oxazolidine‐2,4‐diones bearing sulfur‐substituted quaternary carbon atoms has been developed. It represents a rare C?O bond cleavage of ynamides, as well as a facile and tandem approach for the formation of C?O, C?S, and C?Cl bonds. This redox‐neutral protocol can be applied to the synthesis of multisubstituted oxazolidine‐2,4‐diones with good chemoselectivity and good yields of isolated products under mild conditions.     

In Situ Synthesis and Characterization of Poly(aryleneethynylene)‐Grafted Reduced Graphene Oxide

Using highly soluble bromo‐functionalized reduced graphene oxide (RGBr) as a key graphene template for surface‐directing Sonogashira–Hagihara polymerization, a novel soluble poly(arylene‐ethynylene)‐grafted reduced graphene oxide, hereafter abbreviated as PAE‐g‐RGO, was prepared in situ. The entirely different electron distribution of LUMO and HOMO of PAE‐g‐RGO suggested the existence of a charge‐transfer (CT) state (PAE^.?–RGO^.+). The negative ΔG_CS value (?2.57 eV) indicates that the occurrence of the charge separation via ¹RGO* in o‐DCB is exothermic and favorable. Upon irradiation with 365 nm light, the light‐induced electron paramagnetic resonance (LEPR) spectrum of PAE‐g‐RGO showed a decrease in the spin‐state density owing to photoinduced intramolecular electron transfer events in this system. A sandwich‐type Al/PAE‐g‐RGO/ITO device showed representative bistable electrical switching behavior. The nonvolatile memory performance was attributed to the CT‐induced conductance changes, which was supported by molecular computation results and conductive atomic force microscopy (C‐AFM) images.     

Copper‐Catalyzed Reaction Cascade of Thiophenol Hydroxylation and S‐Arylation through Disulfide‐Directed C−H Activation

Copper‐catalyzed thiophenol C?H activation is described. Through an initial attempt to conduct C‐arylation with arylboronic acid, a rather surprising sequential C?H activation and S‐arylation was discovered. Mechanistic investigation revealed the disulfide intermediate as the key component in directing C?H oxidation. The overall reaction proceeded under mild conditions with molecular oxygen as the oxidant. Discovery of disulfide as the directing group provides a potential new direction for catalytic C?H functionalization under mild conditions.     

A Rhodium Catalyst Superior to Iridium Congeners for Enantioselective Radical Amination Activated by Visible Light

A bis‐cyclometalated rhodium(III) complex catalyzes a visible‐light‐activated enantioselective α‐amination of 2‐acyl imidazoles with up to 99 % yield and 98 % ee. The rhodium catalyst is ascribed a dual function as a chiral Lewis acid and, simultaneously, as a light‐activated smart initiator of a radical‐chain process through intermediate aminyl radicals. Notably, related iridium‐based photoredox catalysts reported before were unsuccessful in this enantioselective radical C?N bond formation. The surprising preference for rhodium over iridium is attributed to much faster ligand‐exchange kinetics of the rhodium complexes involved in the catalytic cycle, which is crucial to keep pace with the highly reactive and thus short‐lived nitrogen‐centered radical intermediate.     

紫外光固化超支化聚硅氧烷的合成及其光固化动力学研究

利用γ-甲基丙烯酰氧基丙基三甲基硅氧烷的受控水解反应即A2-B3单体对法来制备超支化聚硅氧烷,并对合成出的聚合物通过FT-IR、1H-NMR和多角度激光光散射技术(MALLS)进行了表征.结果表明,所得聚合物具有超支化结构且分子中含有大量活性官能团,从而可以实现紫外光引发固化.通过等温差示光量热实验(DPC)研究了聚合物结构、引发剂用量、光强度和聚合温度对聚合物光固化行为的影响规律,并得到了其中一种聚合物的光固化动力学参数,光固化反应总级数约为3,表观活化能为16.9kJ/mol.     

可控降解超支化聚碳硅氮烷的合成与表征

通过锂化四甲基二乙烯基二硅氮烷分别与甲基氢二氯硅烷和二甲基氢氯硅烷的亲核取代反应合成了AB4和AB2型单体AB4M和AB2M,两种单体通过Karstedt催化剂催化的硅氢加成反应分别生成聚碳硅氮烷PAB4M和PAB2M.单体和聚合物的结构通过FT-IR、1H-NMR、13C-NMR、29Si-NMR和体积排除色谱-多角度激光光散射联用(SEC-MALLS)技术进行了表征,结果表明,单体的结构与设计结构相符合;单体聚合时主要以α-硅氢加成方式为主;聚合物具有超支化结构并由N(Si—C)3链节和大量端基双键组成.PAB4M和PAB2M的重均分子量分别为7800和5860g/mol,分子量分布系数分别为2·54和2·31·对PAB4M稳定性的初步研究表明,该聚合物对氯硅烷和在中性条件下对水稳定,但在HCl水溶液中可以降解,且通过控制HCl浓度可以调节其降解速度,从而实现对其控制降解.     

BaF2/La2O3催化剂上甲烷氧化偶联反应活性氧物种的原位红外光谱

用原位红外光谱研究了BaF2/La2O3催化剂上甲烷氧化偶联反应的活性氧物种.结果表明,催化剂经O2预吸附后,在1 108~1 118 cm-1处出现超氧物种O2-的O-O键伸缩振动峰.经18O2同位素交换实验后,原1 108~1 118 cm-1处谱峰的强度减弱,同时在1 086和1 051 cm-1处出现(O18O)-物种和18O2-物种的吸收峰.同位素交换实验进一步确证了1 108~1 118cm-1处谱峰确为O2-物种的吸收峰.在700℃下,O2-物种能够活化CH4生成C2H4,而且O2-物种的消耗量和C2H4的生成量呈很好的消长对应关系.超氧物种O2-是BaF2/La2O3催化剂上甲烷氧化偶联反应的活性氧物种.     

Origins of the high 14-helix propensity of cyclohexyl-rigidified residues in beta-peptides

[structure: see text] beta-Peptides containing residues derived from trans-2-aminocyclohexanecarboxylic acid (ACHC) display high population of 14-helical secondary structure in aqueous solution. We show that hydrophobic interactions between cyclohexyl rings are not responsible for this conformation-promoting effect, and that polar groups may be attached to the cyclohexyl ring without diminishing the effect.     

铂族金属催化剂低温 CO氧化研究近期进展

CO氧化可能是多相催化领域最常见的反应,它不仅能作为探针反应研究催化剂结构、反应活性位等,而且在诸多实际过程如空气净化、汽车尾气污染物控制、燃料电池所用氢源净化等扮演重要角色.最早的 CO氧化催化剂为霍加拉特剂,其组分主要为 CuO与 MnO2混合氧化物,然而在实际应用过程中存在低温活性低、吸湿易失活等缺点.1987年, Haruta等发现湿化学法制备的氧化物负载 Au催化剂表现出非常高的低温 CO氧化活性及耐水稳定性,其 Au粒子以纳米尺度分散,进而引发了催化研究领域的“淘金热”及纳米催化研究热潮.而 CO氧化通常作为考察 Au催化剂结构性质的探针反应,也成为考核其它金属催化剂是否具有高活性的判据之一. Pt族金属上 CO氧化反应从 Langmuir等研究开始至今已有100多年,然而低温下该金属催化剂活性与 Au催化剂相比要低一个数量级.本质原因为 Pt族金属上 CO吸附较强, O2吸附与活化受到抑制,而该步骤被认为是 CO氧化的速控步,因而表现出较低的催化活性.通常 Pt族金属催化剂需要100oC以上 CO才能脱附, O2进而得以吸附.目前研究人员采取多种策略,其基本原则为削弱 Pt族金属上 CO吸附强度或者提供其它活性位供 O2吸附与活化.本综述将概括近十年来Pt族金属催化剂 CO氧化研究进展,主要总结室温甚至超低温条件下的研究成果.高活性 CO氧化催化剂主要是通过采用可还原氧化物为载体或助剂,或者改变催化剂表面性质如使表面富 OH基物种来形成. Au催化剂的研究发现,改变金属粒子尺寸极有可能获得不同寻常的催化性能,而常规的 Pt族金属催化剂研究主要是在纳米尺度.近期人们发现逐渐减小 Pt族金属粒子尺寸,从纳米到亚纳米甚至单原子时,其电荷状态逐渐呈正价形式,这有利于削弱其 CO吸附强度.此外,可通过增强金属载体间的相互作用,改变金属载体接触方式,如从核壳到交叉结联结构,构筑出更多的金属载体界面,使得 O2更容易吸附与活化或稳定更多的 OH基物种进而在此界面与吸附的 CO反应.伴随着表征技术的发展, CO氧化机理的认识也更加深入,这给催化剂的设计带来更多新的思路.(1)改变 CO吸附活化位,将 CO吸附活化位从金属转移到载体上,从而大大降低 CO吸附强度,活化的 CO物种在反应过程中容易溢流到金属载体界面处,这甚至有利于超低温度下(–100oC左右) CO氧化.(2)改变 O2活化形式. O2通常在 Pt族金属上容易以解离氧原子形式存在,通过改变载体、金属载体界面性质使得 O2以分子氧形式活化,如形成超氧或过氧物种,这有利于降低 CO氧化的活化能垒,进而提高其低温甚至超低温下 CO氧化活性.今后,设计并合成出在超低温度下能够氧化 CO的 Pt族金属催化剂将成为 CO氧化催化剂研究的重要方向之一.