Enrichment and separation of antitumor triterpene acids from the epidermis of Poria cocos by pH‐zone‐refining counter‐current chromatography and conventional high‐speed counter‐current chromatography

Triterpene acids were extracted from the epidermis of Poria cocos (Schw.) Wolf. These acids were found to inhibit the growth of lung cancer cells in vitro and in vivo. An efficient method for the preparative separation of antitumor triterpene acids was established that involves the combination of pH‐zone‐refining counter‐current chromatography and conventional high‐speed counter‐current chromatography. We used pH‐zone‐refining counter‐current chromatography to concentrate the triterpene acids using a two‐phase solvent system composed of petroleum ether/ethyl acetate/methanol/water (3:7:5:5, v/v/v/v), trifluoroacetic acid (10 mM) was added to the upper phase as a retainer, and ammonia (10 mM) was added to the lower phase as an eluter. As a result, 200 mg concentrate of triterpene acids was obtained from 1.0 g of crude extract. The concentrate was further separated by conventional high‐speed counter‐current chromatography using a solvent system composed of petroleum ether/ethyl acetate/methanol/water (0.8:1.2:1.2:0.9, v/v), yielding 50 mg of poricoic acid A and 5 mg of poricoic acid B from 120 mg concentrate, respectively. The inhibitory activity of the major compound on lung A549 cells was examined and poricoic acid A was found to significantly inhibit the growth of A 549 cells.     

Monitoring the quality consistency of Weibizhi tablets by micellar electrokinetic chromatography fingerprints combined with multivariate statistical analyses,the simple quantified ratio fingerprint method,and the fingerprint–efficacy relationship

Micellar electrokinetic chromatography fingerprinting combined with quantification was successfully developed and applied to monitor the quality consistency of Weibizhi tablets, which is a classical compound preparation used to treat gastric ulcers. A background electrolyte composed of 57 mmol/L sodium borate, 21 mmol/L sodium dodecylsulfate and 100 mmol/L sodium hydroxide was used to separate compounds. To optimize capillary electrophoresis conditions, multivariate statistical analyses were applied. First, the most important factors influencing sample electrophoretic behavior were identified as background electrolyte concentrations. Then, a Box–Benhnken design response surface strategy using resolution index RF as an integrated response was set up to correlate factors with response. RF reflects the effective signal amount, resolution, and signal homogenization in an electropherogram, thus, it was regarded as an excellent indicator. In fingerprint assessments, simple quantified ratio fingerprint method was established for comprehensive quality discrimination of traditional Chinese medicines/herbal medicines from qualitative and quantitative perspectives, by which the quality of 27 samples from the same manufacturer were well differentiated. In addition, the fingerprint–efficacy relationship between fingerprints and antioxidant activities was established using partial least squares regression, which provided important medicinal efficacy information for quality control. The present study offered an efficient means for monitoring Weibizhi tablet quality consistency.     

Preparation and characterization of natural zeolite supported nano TiO2 photocatalysts by a modified electrostatic self‐assembly method

Natural zeolite supported nano TiO₂ photocatalysts were prepared by a modified electrostatic self‐assembly (ESA) method. First, γ‐mercaptopropyltrimethoxysilane with sulfhydryl (―SH) functional groups was modified on the zeolite powders by using a ‘dry process’. Second, silane with ―SH functional groups was oxidized to sulfonate (―SO₃H) groups by using a hydrogen peroxide/glacial acetic acid mixed solution, and the surface of ―SO₃H silane–zeolite was electronegative charged due to the ionization of ―SO₃H. Third, the hydrolytic titanium polycation from TiCl₄ solution assembled onto the electronegative charged zeolite under electrostatic attraction in the reaction solutions. Finally, zeolite supported nano TiO₂ photocatalysts can be obtained after the above compounds calcined at certain temperature. The samples were characterized by X‐ray diffraction (XRD), Brunauer–Emmett–Teller (BET) surface areas, Fourier transform infrared spectroscopy (FT‐IR), X‐ray photoelectron spectroscopy (XPS) and X‐ray fluorescence (XRF). The photocatalytic activities of the samples were evaluated by the degradation of methyl orange in aqueous solution. The results showed that ESA method effectively improved the composite efficiency of zeolite with TiO₂. The photocatalysts prepared by ESA method exhibited higher photocatalytic and recycling activities than that of traditional method. Copyright © 2014 John Wiley & Sons, Ltd.     

Syntheses,Structures, and Luminescent Properties of d10 Coordination Polymers with 2‐(4‐Carboxyphenyl)‐imidazo[4, 5‐f]‐1, 10‐phenanthroline and 1, 3‐Benzenedicarboxylate Derivatives

Four Zn^II/Cd^II coordination polymers (CPs) based on 2‐(4‐carboxy‐phenyl)imidazo[4, 5‐f]‐1, 10‐phenanthroline (HNCP) and different derivatives of 5‐R‐1, 3‐benzenedicarboxylate (5‐R‐1, 3‐BDC) (R = NO₂, H, OH), [Zn(HNCP)(5‐NO₂‐1, 3‐BDC)]_n ( 1 ), [Cd(HNCP)(5‐NO₂‐1, 3‐BDC)]_n ( 2 ), [Zn(HNCP)(1, 3‐BDC)(H₂O)₂]_n ( 3 ), and {[Zn(HNCP)(5‐OH‐1, 3‐BDC)(H₂O) · H₂O}_n ( 4 ) were synthesized under hydrothermal conditions. Compounds 1 – 4 were determined by elemental analyses, IR spectroscopy, and single‐crystal and powder X‐ray diffraction. Compounds 1 and 2 are isomorphous, presenting a 4‐connected uninodal (4, 4)‐sql 2D framework with threefold interpenetration, which are further extended into the three‐dimensional (3D) supramolecular architecture through π ··· π stacking interactions between the aryl rings of 5‐NO₂‐1, 3‐BDC. Compared to compound 1 , 3 is obtained by using different reaction temperatures and metal‐ligand ratios, generating a 3D framework with –ABAB– fashion via π ··· π stacking interactions. Compound 4 is a 1D chain, which is further extended into a 3D supramolecular net by hydrogen bonds and π ··· π stacking interactions. The thermogravimetric and fluorescence properties of 1 – 4 were also explored.     

改性层状双氢氧化物对铜离子(Ⅱ)和双酚A的协同吸附

采用离子交换法制备了十二烷基苯磺酸根(DBS^-)和柠檬酸根(Cit^3-)复合改性层状双氢氧化物(LDHs),简写为DBS-Cit-LDHs。 利用粉末X射线衍射分析、红外光谱分析、比表面积测定以及元素分析等技术手段对样品进行了表征。 结果表明,DBS^-和Cit^3-已柱撑进入LDHs层间。 研究了DBS-Cit-LDHs对水中重金属离子Cu²⁺和有机污染物双酚A(BPA)的协同吸附性能。 吸附实验结果表明,DBS-Cit-LDHs能同时高效去除Cu²⁺和BPA;对Cu²⁺的强吸附能力缘于DBS-Cit-LDHs层间Cit^3-与Cu²⁺形成了稳定配合物;对BPA的强吸附能力缘于分配作用,且吸附能力与样品比表面积无关。 DBS-Cit-LDHs对Cu²⁺的吸附动力学和热力学分别符合准二级动力学方程和Freundlich等温式;对BPA的吸附分别符合准一级动力学方程和Linear等温式。 二者吸附过程的ΔG^o和ΔH^o均为负值,表明吸附为自发放热过程。     

Sesquiterpenes and prenylated C_6–C_3 compounds from the stems of Illicium henryi

One new sesquiterpene compound, namely, illihenlactone A(1), and one new prenylated C_6–C_3 compound, illihenryione H(2), along with three known sesquiterpenes(3–5) were isolated from the stems of Illicium henryi. The structures of 1 and 2 were elucidated by spectroscopic evidence including NMR, HRESIMS and circular dichroism(CD). Compound 2 exhibited a weak inhibitory ratio for bglucuronidase release induced by platelet-activating factor(PAF) in rat polymorphonuclear leukocytes(PMNs) in vitro.     

乙二醇的分子间氢键结构动力学的飞秒非线性红外光谱

利用稳态线性红外光谱和飞秒泵浦-探测红外光谱技术, 研究了在乙腈(MeCN)、丙酮(AC)、四氢呋喃(THF)和二甲基亚砜(DMSO)溶剂中乙二醇(EG)的结构和羟基(―OH)伸缩振动动力学. 结果表明, 乙二醇的―OH伸缩振动的频率位置、峰宽以及振动弛豫动力学都表现出强烈的溶剂依赖性. 乙二醇溶液中至少存在两种形式的分子间氢键, 一种是溶质-溶剂团簇的分子间氢键, 另一种是溶质-溶质团簇的分子间氢键. 量子化学计算预测的―OH伸缩振动频率的溶剂依赖性与我们的红外光谱实验观测结果一致. 进一步, 我们发现在乙腈中参与形成溶质-溶剂团簇氢键的乙二醇―OH伸缩振动具有最慢的弛豫动力学, 丙酮和四氢呋喃次之, 而最快的弛豫动力学过程发生在二甲基亚砜中. 在每一溶剂条件下, 乙二醇/乙二醇溶质团簇中―OH伸缩振动弛豫都更快一些. 本文结果有助于认识在溶质-溶质、溶质-溶剂分子团簇共存的体系中不同分子间氢键的结构动力学特性.     

Structures and Fluorescent Properties of Cadmium(II) Complexes with 1D and 2D Structures Based on Tridentate Benzimidazole Ligands

The cadmium(II) complexes [CdL1(m‐nba)₂] ( 1 ), [CdL1(p‐nba)₂] · C₂H₅OH ( 2 ), [CdL2(p‐nba)₂] · CH₃OH ( 3 ), and [CdL2(p‐nbat)₂] ( 4 ) containing the ligands L1 and L2 [L1 = 2,6‐bis(benzimidazol‐2‐yl)pyridine, L2 = bis(2‐benzimidazolylmethyl)amine] were synthesized and characterized (m‐nba, p‐nba, and p‐nbat are the anions of p‐nitrobenzoic acid, m‐nitrobenzoic acid, and p‐nitrobenzeneacetic acid, respectively). The complexes were investigated by X‐ray single crystal diffraction, elemental analysis as well as IR and fluorescence spectroscopy. Compounds 1 – 3 contain a distorted pentagonal bipyramidal coordination sphere with Cd^II coordinated by two carboxylate ligands in bidentate‐chelating mode, whereas complex 4 exhibits a distorted octahedral arrangement with one carboxylate ligand in bidentate‐chelating and the other in monodentate coordination mode. 1 and 2 form a 1D chain interplayed by hydrogen bonding and strong π–π stacking interactions. 3 and 4 vary from 1D chain into 2D single‐layer and double‐layer networks because of more extensive hydrogen bonding interactions. The complexes show emission maxima in the blue region in the solid state and emission bands are red‐shifted compared to those of the free ligands.     

Synthesis of Dispirocyclopentyl‐3,3′‐bisoxindoles via Domino Cycloaddition Reactions of 4‐Dimethylaminopyridinium Bromides with 3‐Phenacylideneoxindoles

The base mediated cycloaddition reactions of 4‐dimethylamino‐1‐phenacylpyridinium bromides with two molecular 3‐phenacylideneoxindoles in methylene dichloride afforded functionalized dispirocyclopentyl‐3,3′‐bisoxindoles in good yields and with high diastereoselectivity. The similar cycloaddition reactions of 1‐(N,N‐dialkylcarbamoylmethyl) and 1‐cyanomethyl 4‐dimethylamino‐pyridinium bromide in refluxing ethanol in the presence of triethylamine also resulted in dispirocyclopentyl‐3,3′‐bisoxindoles with high diastereoselectivity. The stereochemistry of dispirocyclopentyl‐3,3′‐bisoxindoles was elucidated on the basis of ¹H NMR data and single crystal structures.     

Preparation of PVDF porous membranes by using PVDF-g-PVP powder as an additive and their antifouling property

The hydrophilic PVDF-g-PVP powder was used as additive to prepare a series of PVDF/PVDF-g-PVP blend porous membranes via an immersion precipitation phase inversion process. FTIR-ATR measurements confirmed that the hydrophilic PVP preferentially segregated to the interface between membrane and coagulant. SEM images showed that there was no big change in the membrane cross-section with the amount of PVDF-g-PVP increased. However, the membrane surface roughness increased with the amount of PVDF-g-PVP increased according to AFM data. The mean pore size of membranes reached max when the amount of PVDF-g-PVP was 10 wt%. The water contact angle and filtration experiments revealed that the surface enrichment of PVP endowed the membranes with significantly enhanced surface hydrophilicity and protein-adsorption resistance. The flux recovery of the porous membranes was increased from 37.50% to 77.23% with the amount of PVDF-g-PVP increased from 0 to 50 wt%, also indicating that the antifouling property of the porous membranes was improved.