Cross-coupling reactions of phenylmagnesium halides with fluoroazines and fluorodiazines

The first nickel-catalyzed cross-coupling reactions between fluoroarenes and aryl organometallics using commercially available ligands are described. The nickel-catalyzed cross-coupling reactions between aryl Grignard reagents and fluoroazines and -diazines occurred in THF at room temperature using commercially available 1,2-bis(diphenylphosphino)ethane, 1,3-bis(diphenylphosphino)propane, or 1,1'-bis(diphenylphosphino)ferrocene as ligand. Various fluoro substrates such as pyridines, diazines (pyrazine, pyridazine), benzodiazines (quinoxaline), and quinolines were successfully involved in the reaction with phenylmagnesium halides (phenylmagnesium chloride, 2-methoxyphenylmagnesium bromide, and 4-methoxyphenylmagnesium bromide). The conditions used also allowed the cross-coupling of 4-fluorotoluene with arylmagnesium reagents.     

Two N,N′‐diaryl‐2,2,2‐trichloroethane‐1,1‐diamines: hydrogen‐bonded supramolecular structures in one and two dimensions

The molecules of 2,2,2‐trichloro‐N,N′‐diphenylethane‐1,1‐diamine, C₁₄H₁₃Cl₃N₂, are linked into (040) sheets by a combination of C—H...Cl and C—H...π(arene) hydrogen bonds. In 2,2,2‐trichloro‐N,N′‐bis(4‐methylphenyl)ethane‐1,1‐diamine, C₁₆H₁₇Cl₃N₂, the molecules are linked into C(7) chains by two independent C—H...Cl hydrogen bonds and one Cl...Cl contact.     

大气采样器检定规程探讨及修订建议

通过对大气采样器流量示值误差进行计量检定发现,是否有吸收负栽检定结果差别较大,而计量检定规程并没有详细说明,因此对大气采样器检定规程进行了探讨并提出修改建议.     

肌醇在氯化钠水溶液中的稀释焓和焓对相互作用

应用微量热法测定了298.15K时肌醇在纯水和氯化钠水溶液中的稀释焓,根据McMillan-Mayer理论计算了肌醇在不同浓度的氯化钠溶液中的2到4阶焓相互作用系数.结果表明,肌醇在氯化钠溶液中的焓对相互作用系数h2均为负值,并且随着氯化钠浓度的增大,h2的值呈增大趋势.根据溶质-溶质相互作用和溶质-溶剂相互作用对焓对相互作用系数的变化趋势进行了解释.     

Continuous-wave operation of InAs/InP quantum dot tunable external-cavity laser grown by metal-organic chemical vapor deposition

We demonstrate high-performance broadband tunable external-cavity lasers(ECLs) with the metal-organic chemical vapor deposition(MOCVD) grown In As/In P quantum dots(QDs) structures. Without cavity facet coatings, the 3-d B spectral bandwidth of the Fabry–Perot(FP) laser is approximately 10.8 nm, while the tuning bandwidth of ECLs is 45 nm.Combined with the anti-reflection(AR)/high-reflection(HR) facet coating, a 92 nm bandwidth tuning range has been obtained with the wavelength covering from 1414 nm to 1506 nm. In most of the tuning range, the threshold current density is lower than 1.5 k A/cm2. The maximum output power of 6.5 m W was achieved under a 500 m A injection current.All achievements mentioned above were obtained under continuous-wave(CW) mode at room temperature(RT).     

基于能力培养的应用型本科物理实验教学模式探索

通过对传统大学物理实验教学现状的分析和讨论,针对目前大学物理实验课程的教学模式进行研究,在遵循实验教学自身规律的前提下,构建"模块化"实验课程教学模式,从而改善课程结构,为培养学生解决具体问题的实践能力和创新思维提供针对性的训练;并采用"启发式""问题式"的教学方法和多样化的考核评价标准,对于不同专业、不同基础、不同背景的学生进行差异化教学,建立以人才培养为核心的科学教学体系,进一步提高大学物理实验课程的教学质量和效果.     

Robust Laminated Anode with an Ultrathin Titanium Nitride Layer for High-Efficiency Top-Emitting Organic Light-Emitting Diodes

The effective reflective anode remains a highly desirable component for the fabrication of reliable top-emitting organic light-emitting diodes (TE-OLEDs) which have the potential to be integrated with complementary metal-oxide-semiconductor (CMOS) circuits for microdisplays. This work demonstrates a novel laminated anode consisting of a Cr/Al/Cr multilayer stack. Furthermore, we implement an ultra-thin titanium nitride (TiN) layer as a protective layer on the top of the Cr/Al/Cr composite anode, which creates a considerably reflective surface in the visible range, and meanwhile improves the chemical stability of the electrode against the atmosphere or alkali environment. Based on [2-(2-pyridinyl-N)phenyl-C](acetylacetonate)iridium(III) as green emitter and Mg/Ag as transparent cathode, our TE-OLED using the TiN-coated anode achieves the maximum current efficiency of 71.2 cd/A and the maximum power efficiency of 66.7 lm/W, which are 81% and 90% higher than those of the reference device without TiN, respectively. The good device performance shows that the Cr/Al/Cr/TiN could function as a promising reflective anode for the high-resolution microdisplays on CMOS circuits.     

Front Transparent Passivation of CIGS-Based Solar Cells via AZO

We report a novel strategy for the front passivation of solar cells via aluminum-doped zinc oxide (AZO) films in the case of CIGS solar cells, leading to the highest efficiency of 15.07% without alkali metal post treatment and anti−reflective layer. The good passivation of CIGS solar cells via AZO films is attributed to the field passivation simulated by the SCAPS−1D software. The AZO films also exhibit high optical transparency both in visible and near infrared wavelength region, high conductivity, and cost−effective fabrication advantage. Importantly, the AZO films are deposited at room temperature via radio−frequency magnetron sputtering, showing that the AZO films are also applicable to other solar cells such as perovskite solar cells. Our work is of significance for advancing the development of CIGS−based photovoltaics devices by the well front passivation of AZO. The wide application of AZO in other solar cells such as perovskite solar cells and related tandem solar cells may also accelerate the development of these solar cells because of potential passivation of AZO, low deposition temperature, and high optical transparency of AZO.     

Organic/Inorganic Species Synergistically Supported Unprecedented Vanadomolybdates

Vanadomolybdates (VMos), comprised of Mo and V in high valences with O bridges, are one of the most important types of polyoxometalates (POMs), which have high activity due to their strong capabilities of gaining/losing electrons. Compared with other POMs, the preparation of VMos is difficult due to their relatively low structural stability, especially those with unclassical architectures. To overcome this shortcoming, in this study, triol ligands were applied to synthesize VMos through a beaker reaction in the presence of V₂O₅, Na₂MoO₄, and organic species in the aqueous solution. The single-crystal X-ray diffraction results indicate that two VMo clusters, Na₄{V₅Mo₂O₁₉[CH₃C(CH₂O)₃]}∙13H₂O and Na₄{V₅Mo₂O₁₉[CH₃CH₂C(CH₂O)₃]}∙13H₂O, with a similar architecture, were synthesized, which were both stabilized by triol ligand and {MoO₆} polyhedron. Both clusters are composed of five V ions and one Mo ion in a classical Lindqvist arrangement with an additional Mo ion, showing an unprecedented hepta-nuclear VMo structure. The counter Na⁺ cations assemble into one-dimensional channels, which facilitates the transport of protons and was further confirmed by proton conductivity experiments. The present results provide a new strategy to prepare and stabilize VMos, which is applicable for developing other compounds, especially those with untraditional architectures.     

毛细管电泳法在手性分离中的应用及进展

近年来,毛细管电泳(CE) 手性分离方法的研究主要集中在各种手性添加剂与对映体药物的匹配及实验条件的最优化选择上.目前,较为成熟的CE分离模式有:区带电泳(CZE)、凝胶电泳(CGE)、等速电泳(CITP)、胶束电动色谱(MEKC)和非水电泳(NACE)等,并已成功地用于手性化合物对映体的分离.CE手性分离研究正朝着新型手性选择剂的研制和实现与其他各种定性分析仪器及其他色谱分离模式的联用方向发展.