测定核黄素的化学发光新方法

研究了核黄素的化学发光性质，建立了一种测定核黄素的化学发光新方法，并应用于实际样品中核黄素的测定，与文献相比，本方法无需避光，而且分析体系和样品处理简单；干扰小，牛血清白蛋白、抗坏血酸、天冬氨酸等８种生物有机物质和 Ｃｕ（Ⅱ）、Ｚｎ（Ⅱ）、Ｆｅ（Ⅲ）等１５种常见金属离子的允许量较大；核黄素溶液浓度在０． １０～５０ ｍｇ／Ｌ范围内，与化学发光强度成正比，方法线性范围宽；测定１．０ｍｇ／Ｌ核黄素溶液１２次，求得相对标准偏差为２．９％，方法精密度高；方法的检测限为０．０７５ ｍｇ／Ｌ，灵敏度高。     

二氯化二(N-甲基-N′-苄基-乙二胺)(二水)合镍的合成及其与瓜环相互作用的研究

以氯化镍与N-甲基-N′-苄基-乙二胺(NMEA)反应合成了配合物二氯化二(N-甲基-N′-苄基-乙二胺)二水合镍([Ni(NMEA)₂·(H₂O)₂]·Cl₂)。利用元素分析、IR光谱、NMR对其结构进行了表征。通过1H NMR和UV-Vis光谱研究了该配合物与六、七、八元瓜环的相互作用，并且考察了其动力学行为。结果表明六、七元瓜环与配合物能形成物质的量比为2∶1的超分子结构，而八元环与配合物的作用则具有不同的模式。     

A Substituted Tetraazaporphyrinogen as an Electroactive Component for a Polymeric Membrane Anion-Selective Electrode

A novel anion-selective electrode has been prepared by usingtetraazaporphyrinogen as the electroactive component and o-nitrophenyloctylether as the plasticizer. The electrode exhibits almost Nernstian responsecharacteristics for Pic^-, ReO ₄ ^- ,SCN^-, ClO ₄ ^- and TPB^-. The linearresponse ranges towards the above-mentioned anions are 10^-6 10^-2, 10^-5 10^-2,10^-5 10^-2, 10^-5 10^-1, and 10^-5 10^-2mol/Land the corresponding slopes are -56.8, -57.1, -56.3, -56.1, and -59.9mV/decade with correlation coefficients of -0.99978, -0.99987, -0.99999,-0.99998, and -0.99998, respectively. The electrode shows an anti-Hofmeisterselectivity sequence: Pic^- > SCN^- >ReO ₄ ^- > ClO ₄ ^- > I^- >Br^- > BF ₄ ^- > Sal^->NO ₃ ^- > Cl^-. The unusual responsemechanism of the novel anion-selective electrode was investigated byexperimental observations and calculation with the MNDO method. Theelectrode was used as a TPB^- and a Pic^-sensitiveelectrode, respectively, and applied to the assay of levamisolehydrochloride tablets by potentiometric titration and Gran's methods. Theresults obtained are in excellent agreement with that determined by thestandard pharmacopoeia method based on nonaqueous titration.     

铁-铬-钒三元系固态合金的量热研究

本文介绍一种自制环境等温型高温量热计, 其原理基于差热分析。在1300 K下所测纯铁等相变热与文献值吻合甚好, 证明仪器可靠。应用此仪器系统测量了Fe-Cr-V三元系九种不同成份的α-合金生成焓, 以及它们的α-α相变焓。为该体系的热力学研究提供了一些必要的热化学数据。     

Highly sensitive voltammetric biosensor for nitric oxide based on its high affinity with hemoglobin

Although heme protein-based, amperometric nitric oxide (NO) biosensors have been well documented in previous studies, most have been conducted in anaerobic conditions. Herein we report a novel hemoglobin-based NO biosensor that is not only very sensitive but also usable in air. The heme protein was entrapped in a sodium montmorillonite film, which was immobilized at a pyrolytic graphite electrode surface. Film-entrapped hemoglobin can directly exchange electrons with the electrode, and this process has proven to favor the catalytic reduction of oxygen. In addition, NO induced a cathodic potential shift of the catalytic reduction peak of oxygen. This potential shift was proportional to the logarithm of NO concentration ranging from 4.0 × 10⁻¹¹ to 5.0 × 10⁻⁶ mol/L. The detection limit has been estimated to be 20 pM, approximately four orders lower than previously reported amperometric detectors.     

Fire retardant synergism between melamine and triphenyl phosphate in poly(butylene terephthalate)

The fire retardant efficiency of melamine (MA) and triphenyl phosphate (TPP) in poly(butylene terephthalate) (PBT) was studied by the limiting oxygen index (LOI) and the UL94 test. On adding 10 wt. % MA and 20 wt. % TPP, LOI increased from 20.9 to 26.6 and the UL94 V-0 rating was achieved. SEM and DSC analyses show that the fire retardants are compatible with PBT and facilitate crystallization of PBT. The occurrence of an interaction between MA + TPP and PBT was elucidated by TGA, dynamic FTIR, and pyrolysis/GC/MS. MA + TPP changes the degradation path of PBT and modifies the compositions of the gas and condensed-phase products.     

Preparation and Characterization of Ultrafine Rare Earth Molybdenum Complex Oxide Particles

Ultrafine rare earth molybdenum (La–Mo and Ce–Mo) complex oxide particles have been synthesized by the sol–gel process using citric acid as complexing agent. The influence of preparation conditions such as thermal treatment temperature (T), molar ratio of citric acid to metallic ions (L/M), and pH value of the starting solution on the oxide particle size has been studied. The formation of La₂Mo₂O₉and Ce₂Mo₃O₁₂has been investigated using XRD, DTA–TG, FT-IR, TEM, and BET surface area measurements. It is shown that the morphology and structure of the oxide particles are significantly dependent on the preparation conditions. The influence of different preparation methods on the particle size of La–Mo and Ce–Mo oxides is also discussed.     

Determination of capsaicinoids in salsa by liquid chromatography and enzyme immunoassay

Two simple and rapid methods were developed to monitor pungency of salsa in production. Capsaicin (C) and dihydrocapsaicin (DHC) were quantitated in 17 commercially available tomato-based salsas by enzyme immunoassay (EIA) and liquid chromatography (LC) with fluorescent detection. Samples were extracted with methanol and the extracts were subjected to solid-phase extraction (SPE) using polystyrene-divinylbenzene columns. Analysis of SPE eluates showed good correlation (r2 = 0.953) between LC and EIA, with a slightly high bias for EIA. Salsa fortified with C and DHC from 0.118 to 103.2 microg/g resulted in recoveries of 90-112% (C) and 76-97% (DHC). Limits of detection by LC were 0.1 microg/g for each capsaicinoid and 0.1 microg/g by EIA for total capsaicinoids. The LC on-column response was linear from 0.2 to 100 ng for both C and DHC, whereas the working range for EIA was 0.1-2.0 ppm. Pungency varied between different salsa brands labeled mild, medium, and hot.     

Self－assembly of Novel Hetero[3]rotaxane, [2]Rotaxanes and [2]Catenane

One linear template 13 and one cyclophane template 15, both incorporating two electron rich 1,4‐dialkoxybenzene units and one diamide unit, have been synthesized. By utilizing donor‐acceptor interaction and/or intermolecular hydrogen bonding assembling principles, one novel hetero[3]rotazane 22·4Cl, possessing one neutral and one tetracationic ring components, has been synthesized from 13, through neutral [2]rotaxane 21 as intermediate. With 15 as template, tetracationic [2]catenane 23·4PF₆ was assembled by using donor‐acceptor interaction, but no neutral [2]rotaxane could be obtained under the typical conditions of hydrogen bonding assembling principle. The interlocked supramolecular compounds have been characterized and their spectral properties are investigated.     

Dispersed fluorescence spectroscopy of jet-cooled HCF and DCF: Vibrational structure of the X 1A' state

We recorded dispersed fluorescence (DF) spectra following excitation of the pure bending levels 2(0) (n) and the combination states 1(0) (1)2(0) (n) and 2(0) (n)3(0) (1) in the A 1A"<--X 1A' system of HCF and DCF. Spectra were measured with a 0.3 m spectrograph equipped with a gated intensified charge coupled device (CCD) detector and obtained under jet-cooled conditions using a pulsed discharge source. The DF spectra reveal rich detail concerning the vibrational structure of the X state up to 10 000 cm(-1). For HCF, resonances among the nearly degenerate levels 1(1)2n, 2n+13(1), and 2n+2 produce a polyadlike structure in the spectrum, and the usual effective spectroscopic Hamiltonian (Dunham expansion) poorly reproduces the experimental term energies. In contrast, this Hamiltonian works well for the term energies of DCF. Density functional calculations of the ground state vibrational frequencies were performed; the results are in excellent agreement with the experimentally derived vibrational parameters. The search for perturbations involving the low-lying a 3A" state is described.