依文思蓝褪色分光光度法测定雷洛昔芬

在pH 1 .4～ 2 .5的NaAc HCl缓冲介质中 ,雷洛昔芬 (raloxifene)与依文思蓝 (evansblue)反应形成离子缔合物 ,使依文思蓝溶液褪色 ,最大褪色波长位于 61 0nm。雷洛昔芬在 0～ 1 .4× 1 0 - 5mol/L的浓度范围内遵守比尔定律 ,表观摩尔吸光系数ε6 1 0 为 1 .76× 1 0 4L·mol- 1 ·cm- 1 。方法具有较高的灵敏度和良好的选择性     

压力、温度和晶粒尺寸对Fe-N合金的合成及结构的影响

在 1× 1 0 - 3 Pa～ 4 GPa的压力和 5 80～ 930 K温度范围内 ,利用高压技术并结合机械球磨 ,研究了压力、温度和晶粒尺寸对α-Fe与非晶 BN的固态反应的影响 .发现高压和晶粒细化可以极大地促进α-Fe和非晶 BN的固态反应过程 ,α-Fe与非晶 BN发生固态反应的临界晶粒尺寸约 8nm.压力和温度对反应产物及其晶体结构有明显影响 .2 GPa和 80 0 K时 ,反应产物为具有正交结构的 Fe-N新相 ;在 3～ 4 GPa和 690～80 0 K时 ,可形成单一ε-Fex N合金相 ;而在 4 GPa和 930 K以上 ,反应产物由 Fe-N合金相转变为 Fe3B相     

神府煤焦与水蒸气、 CO2气化反应特性研究

采用高温微量热天平和自制水蒸气发生装置进行神府煤焦与水蒸气和CO2气化实验,考察热解速率、不同气化剂(CO2和水蒸气)以及温度对气化反应的影响.用扫描电镜和吸附仪测定煤焦的初始结构.两种煤焦孔径为2 nm～170 nm的孔占总孔容的90%以上.神府快速煤焦(FP)与水蒸气气化活性比慢速煤焦(SP)高4.16倍,FP比SP挥发分脱除快,破坏其孔结构,减少缔合机会和二次反应.SP的BET比表面积为1.077 7 m2/g,FP的BET比表面积为1.893 9 m2/g.SP与水蒸气气化活性是CO2的9.94倍,FP与水蒸气的气化活性是CO2的7.15倍,水蒸气比CO2气化时进入的孔径范围广及水蒸气比CO2更容易解离.同种煤焦与水蒸气和CO2气化时的气化速率与转化率之间的趋势相近.用随机孔模型拟合并求取反应动力学参数,温度对SP与水蒸气、CO2反应速率,以及FP与水蒸气反应速率影响相似,而对FP与CO2反应速率影响明显比前三个反应要小.     

反应注射成型聚氨酯互穿聚合物网络研究——刚性网络对于体系形态及性能的影响

用微型反应注射成型机制备了以聚氨酯(PU)为弹性相的两类同步互穿聚合物网络(SIN),其刚性相分别采用保留仲羟基的乙烯基酯树脂(VERH)以及封闭仲羟基的乙烯基酯树脂(VERA)。用傅里叶变换红外光谱在线跟踪了这类互穿网络的生成过程,发现刚性网络抑制了PU网络中硬段有序结构的形成,两个网络间有一定程度的互穿,而两个网络间的化学键作用进一步削弱氢键强度。自旋—自旋弛豫时间的测定进一步表明网络间存在一定的互穿以及刚性相对于PU硬段结晶的抑制作用。材料的力学性能与其SIN的形态有关。VERA网络对PU表现出明显的增强作用,而由VERH网络形成的SIN则由于体系相分离进程受到严重阻碍而使材料性能恶化。     

乳液体系中的RAFT可控/活性自由基聚合研究进展

可逆加成-断裂链转移聚合(RAFT)是新近发展起来的可控/活性自由基聚合方法。由于该方法具有适用单体范围广、反应条件温和、可采用多种聚合实施方法等优点,已成为一种有效的分子设计手段。本文总结了近几年文献报道的在乳液和细乳液体系中实施RAFT聚合反应的研究进展,对非均相体系的稳定性、聚合反应过程中的动力学特点、以及聚合产物的分子量及其分布等方面的研究进行了综述。     

Exposure dose assessment and discussion on radioisotope production and application

The exposure dose status on radioisotope production and application in China has been assessed in the paper. The average annual occupational exposure dose received by workers in the radioisotope production is about one tenth of the annual dose limit in normal situation. It is less than one twentieth for workers in the radioisotope applications. However, the annual collective dose for the latter is higher than the former by one oder of magnitude due to the larger number of workers in the application field. Although the output of radioisotopes increased doubly in 1980's as compared with 1970's, the increase on the annual collective dose was not obvious. For exposure to the public,¹³¹I for example, the collective dose in the radioisotope production decreased by one to two orders of magnitude and the releasing factor reduced by two orders of magnitude. Therefore, the exposure dose received by workers in radioisotope production and application is lower in normal situation. However, the facts worth paying attention to are that there were many events and accidents which happened in the radioisotope applications, especially at the irradiation facilities. The probability of fatal accident was as high as 10^–3 per irradiator year. In order to improve the radiation safety situation, it is imperative to conduct the safety assessment for irradiation facilities, to enhance management of the radioactive wastes and spent sources and to establish the experience feedback system.     

超临界流体干燥过程的分析

以ZrOCl2•8H2O为原料，采用超临界流体干燥（SCFD）法，在短时间内制备出大孔体积高比表面ZrO2气凝胶超细粉．该法具有良好的稳定性和可靠性．建立了醇凝胶中液相含水量的分析方法，为产品质量控制及确认体系是否处于超临界状态提供了依据．对抽提后的溶剂分析表明，SCFD过程是一物理过程．对水的抽提干燥过程亦进行了初步的理论探讨．     

Nickel-promoted ligand-free palladium-catalyzed Suzuki coupling reaction

Summary A Ni-promoted ligand free palladium catalyst system for Suzuki coupling of aryl bromides has been developed in high efficiency under mild reaction conditions. It was obtained in situ by introducing NiCl₂ to PdCl₂/PVP using a parallel high-throughput screening technique. A wide range of aryl bromides bearing a variety of functional groups was evaluated.     

K-Mo基催化剂的表面酸性与其合成醇选择性

对500℃和800℃焙烧制得的氧化态K－MoO3／γ－AlO3，K－MoO3／SiO2及非负载K－Mo催化剂进行硫化后，测试其合成醇活性．结果表明500℃焙烧制得的负载型催化剂显示较高的合成低碳烃活性和较低的合成低磷醇选择性，经800℃焙烧后，合成低磷醇的选择性大幅度提高．500℃焙烧的非负载K－Mo催化剂显示较高的合成醇选择性，经800℃焙烧后，促碳醇的选择性保持不变．用氨的吸附及TPD方法测定了各样品的酸性，并与催化剂活性对照，发现催化剂酸性越强，酸量越大，则其合成醇选择性越低．催化剂上的乙醇分解实验证实，催化剂的酸量大小与它的醇分解活性成正变关系，这些结果说明催化剂酸性对其合成醇性能有直接的影响．     

STUDY ON 1-HEXENE POLYMERIZATION BASED ON ZIEGLER-NATTA CATALYSTS WITH DOPED SUPPORT

A series of Ti/Mg supported catalysts are prepared by using ball-milled mixtures of MgCl2-ethanol adducts and NaCl as supports, and 1-hexene polymerizations catalyzed by the novel catalysts are studied. It is found that the molecular weight distribution of poly(1-hexene) becomes apparently narrower when catalysts with doped supports are used, indicating that changing the structure of the support is an effective way to regulate the active center distribution of heterogeneous Ziegler-Natta catalyst.