Practical synthesis of amides from alkynyl bromides, amines, and water

A general and efficient method for the synthesis of a wide range of amides is described here. The reactions were conducted under convenient conditions and provided secondary and tertiary amides in moderate to excellent yields. A variety of amines and substituted alkynyl bromides were used to investigate the scope of the reactions.     

IRAP: An efficient retrotransposon-based electrophoretic technique for studying genetic variability among geographical isolates of Schistosoma japonicum

In the present study, a inter-retrotransposon-amplified polymorphism (IRAP) technique, based on retrotransposons, was used to examine genetic variability among Schistosoma japonicum isolates from different provinces in mainland China. Of the 15 primers screened, 5 produced highly reproducible IRAP patterns. Using these primers, 54 discernible DNA fragments were generated with 40 (74.07%) being polymorphic, indicating considerable genetic variation among the examined S. japonicum isolates. The primer LTR-11 was found to be able to differentiate male and female parasites, producing one constant specific band for female S. japonicum isolates. The percentages of polymorphic bands (PPB) among all parasites, among isolates from mountainous provinces and among those from the lake/marshland areas were 74.07, 48.15, and 66.67%, respectively. UPGMA analysis revealed that the IRAP profiles could group S. japonicum isolates in mainland China into two clades (mountainous and lake/marshland types), and samples from the same geographical origins clustered together. These results demonstrated that the IRAP technique is suitable for studying genetic diversity and population structures, and also provides an effective technique for studying sex differentiation of S. japonicum.     

Thermal conductivity of microPCMs-filled epoxy matrix composites

Microencapsulated phase change materials (microPCMs) have been widely applied in solid matrix as thermal-storage or temperature-controlling functional composites. The thermal conductivity of these microPCMs/matrix composites is an important property need to be considered. In this study, a series of microPCMs have been fabricated using the in situ polymerization with various core/shell ratio and average diameter; the thermal conductivity of microPCMs/epoxy composites were investigated in details. The results show that the microPCMs have smooth surface and regular global shape with compact methanol–melamine–formaldehyde shell. The shell thickness does not greatly influence the phase change behaviors of PCM. Moreover, smaller microPCMs embedded in epoxy can improve the thermal transmission ability of composites. The effect of thermal conductivity of composites can be improved with higher volume fraction (10–30%) of microPCMs; and smaller size microPCMs with the same content of PCM may also enhance the thermal transmission area in matrix. Modeling analysis of relative thermal conductivity indicates that mixing higher thermal conductivity additive in PCM or matrix is an appropriate method to improve the thermal conductivity of microPCMs/matrix composites.     

苯与丙烯在β分子筛上吸附行为的蒙特卡罗研究

采用巨正则统计系综蒙特卡罗模拟方法研究了β分子筛上苯与丙烯分子的吸附行为. 由分子筛内吸附质粒子云分布可知, 在100 kPa时, 丙烯在分子筛上的吸附量要远远大于苯的吸附量. 由吸附相互作用能分布来看, 苯与分子筛之间相互作用能比丙烯与分子筛之间的相互作用能更负, 这就使苯分子的吸附相对于丙烯分子稳定. 相对而言, 温度变化对丙烯吸附影响远大于对苯吸附的影响, 如100 kPa时, 温度由298 K升高至443 K导致丙烯分子吸附量明显减少, 由每8个晶胞吸附98个丙烯分子减少到80个; 而对苯分子吸附却没有显著的影响. β分子筛上存在着苯和丙烯的竞争吸附, 并且吸附分子之间存在相互作用使两者与分子筛之间的相互作用能分布改变. 在压力范围1×10－3～5.0 kPa, 不同温度下苯与丙烯在分子筛内吸附等温线的模拟结果表明, 在较高温度、较低压力下丙烯的吸附量要小于苯的吸附量.     

脲或盐酸胍溶液中变性溶菌酶复性过程中集聚体的研究

建立在蛋白质变性-复性三态模型的基础上, 给出了一个描述在变性液中变性蛋白质复性时蛋白质浓度和其复性率的关系式. 通过这个关系式, 可以获得两个重要的描述蛋白质变性-复性体系特征的参数, 一个是包含在一个集聚体分子中的变性蛋白质的分子数目n, 另一个是蛋白质从原始态到形成集聚体过程中的表观集聚平衡常数K. 以三种溶菌酶在脲和盐酸胍溶液中的变性-复性过程对此方程进行了验证, 结果表明所给出的方程能够很好地描述三种溶菌酶在这两种变性液中的复性结果, 三种溶菌酶在两种变性液中有形成二分子集聚体的趋势. 变性溶菌酶在复性过程中的电泳和高效凝胶排阻色谱也同时能够监测到复性过程中集聚体的形成, 并且监测结果与上述方程所得的结果一致.     

PLGA/明胶共混体系的静电纺丝研究

采用静电纺丝技术制备了聚乳酸乙醇酸(PLGA)/明胶(Gt)的复合超细纤维, 考察了溶液浓度、电压及流速对纤维形貌的影响. 研究了不同明胶比例的纤维膜的微观形貌和干湿态的力学性能. 结果表明, 在溶液浓度0.12 g/mL, 电压7.5 kV, 流速0.8 mL/h条件下, 所得PLGA/Gt复合纤维直径较小, 粗细较均匀且缺陷少. 含有明胶的复合纤维直径远小于PLGA单纺纤维直径, 明胶的加入降低了膜的拉伸强度和断裂伸长率, 提高了膜的亲水性. 经PBS浸泡后, 复合膜的弹性得到加强. 明胶质量分数为5%和10%时, 纤维直径分布较窄, 当明胶的质量分数增加至15%时, 纤维的直径分布变宽.     

Modified Josephson Equation for Mesoscopic Parallel LC Circuit Including a Josephson Junction

By introducing the entangled state representation, parallel LC circuit including a 3osephson junction equation associated with the modification of the motion equation. the Cooper-pair number-phase quantization of the mesoscopic is realized. In the Heisenberg picture, the modified Josephson Faraday equation about the inductance is deduced from the     

染料敏化太阳能电池对电极

对电极是染料敏化太阳能电池的重要组成部分,改进对电极是提高其能量转换效率及降低成本的有效手段之一.本文重点综述了2008年以来染料敏化太阳能电池对电极的研究成果,详细介绍了各类对电极包括金属Pt、Au、Ni,纳米炭材料和导电聚合物等对电极的优点和制备工艺.Pt对电极性能最好,但是高成本限制了它在染料敏化太阳能电池产业化中的应用;新型的价格低廉、活性较高的纳米炭材料和导电聚合物及其复合材料等对电极在染料敏化太阳能电池的研究中逐渐引起人们的重视.     

环状集输水平管内油-气-水三相流流型试验研究

目前我国东部陆上油田大部分已进入特高含水采油期,绝大多数油井综合含水率已超过85%,部分油井已达到95%。油-气-水三相流型是特高含水混输技术界限确定、水力热力计算方法研究及集输系统科学运行管理的基础。为了研究大庆低渗透油田环状集输水平管道内油-气-水三相流型,研制一套流型试验装置,进行了一系列试验研究,获得了1360组油气水三相流型图及相应的流动参数。对采集到的流型及试验数据进行分析,首次总结出水平环状集输管道中油-气-水三相流的五种流型,分别为分层流、三层扰动流、波浪冲击流、气弹掺混流和完全掺混流。同时给出了每种流型对应的参数范围,并对每种流动形态及典型特征进行了解释。     

Effect of Carbonized Conditions on Residual Strain and Crystallinity Quality of Heteroepitaxial Growth 3C-SiC Films

Heteroepitaxial growth of SiC on n-Si（111） substrates is performed by a low pressure chemicaJ vapor deposition process. The effects of different carbonized temperature and carbonized time on the crystalline quality and the residual strain of 3C-SiC films are discussed. The results show that the residual strain is obviously reduced and the crystalline quality is greatly improved at the best carbonized temperature of 1000℃ and the carbonized time of 5 min. Under these optimized carbonization conditions, thick epitaxial films of about 15 μm with good crystalline quality and low residual strain can be obtained.