Essential Work of Fracture Parameters of Injection-Molded Polypropylene/Polyolefin Elastomer Blends

The influence of polyolefin elastomer (POE) content on the fracture behavior of injection-molded polypropylene (PP)/POE blends was evaluated by means of the essential work of fracture (EWF) method. The results indicated that the EWF approach worked well for the PP/POE blends when POE content was 0～7.5 wt% of the blends. The specific essential work of fracture (w _e) increased with increasing POE content, and the dominant factor that affected w _e was the necking and subsequent fracture process. The specific nonessential work of fracture (βw _p) slightly decreased with increasing POE content, while the specific plastic work (w _p) showed an increasing trend with the decrease of the shape factor (β) of the specimen. Finally, it was shown that w _e could be predicted reasonably well via the COD values.     

Designing and Characterization of Biodegradable Multiblock Poly(L-Lactic Acid)/Polybutadiene Elastomers

A series of poly(L-lactic acid)/polybutadiene (PLA/PB) biodegradable multiblock elastomers was synthesized and characterized. A two-step process to prepare PLA/PB multiblock elastomers was applied. Melt polymerization was used to prepare poly(L-lactic acid) (PLA) terminated with hydroxyl groups and, at the same time, hydroxyl-terminated polybutadiene (HTPB) and 1,6-hexamethylene diisocyanate (HDI) were employed to synthesize diisocyanate-terminated polybutadiene (ITPB). Then, PLA and ITPB were reacted with different PLA/PB weight ratios. Consequently, a series of PLA/PB biodegradable poly(ester-urethane)s with crosslinked chains was obtained. Swelling characteristics and crosslink density of the crosslinked elastomer were investigated. DMA was applied to characterize its thermal properties. The measurement of mechanical properties showed that a PLA/PB elastomer with adjustable mechanical properties was synthesized. Micromorphology, hydrophobicity, and degradability of the material were also characterized.     

Injection Molding Shrinkage and Mechanical Properties of Polypropylene Blends

Polypropylene (PP) blends based on isotactic polypropylene (iPP), propylene-ethylene block copolymer (bPP), and propylene–ethylene random copolymer (rPP) were prepared by melt blending and the effects of content of bPP and rPP on the shrinkage during solidification and storage and mechanical properties of the blends were studied. It was found that the addition of polypropylene copolymer could effectively reduce the processing shrinkage of iPP and the lowest shrinkage of the blends was achieved at a loading of 2 wt% bPP or rPP. The flexural modulus and tensile strength of the blends decreased a little while the impact strength and elongation at break were improved greatly compared with those of iPP.     

Dynamical study on the stimulated processes of an exciton and a biexciton in a polymer

By applying a femtosecond stimulating pulse, we theoretically study the stimulated processes of an exciton and a biexciton in a polymer within the framework of an extended Su–Schrieffer–Heeger tight-binding model. For an exciton, it is obtained that the stimulated emission and absorption between the intragap levels take place with the same probability, by which we will not get the light amplification. However, the light amplification can be realized by the stimulated emission between the intragap levels in a biexciton, which is found to have two different modes. Finally, effect of the stimulating energy and intensity on the stimulated processes is separately analyzed. These results might be of great importance for further improving the optical applications of polymers, especially for optimizing the polymer laser properties.     

Rapid sonochemical synthesis of irregular nanolaminar-like Bi2WO6 as efficient visible-light-active photocatalysts

Irregular Bi₂WO₆ nanolaminars have been successfully synthesized via a rapid sonochemical approach using bismuth nitrate and tungstic acid as precursors in an aqueous solution. The characteristics of them were investigated in detail by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N₂ adsorption, pore value, PL spectroscopy and UV–vis diffuse reflectance spectroscopy (UV–vis DRS). These irregular nanolaminars are of geometric shapes of orthorhombic Bi₂WO₆ with their basal plane being (0 0 1). They possess high crystallinity, lager surface area and pore value, which means fewer traps and stronger photocatalytic activity. The growth mechanism of such special nanolaminar was related to the sonochemical synthesis route, which played a key role in the formation of Bi₂WO₆ nanolaminar. Simultaneously, it was found that the formation of Bi₂WO₆ nanolaminar is a time dependent process. The Bi₂WO₆ nanolaminar has higher photocatalytic activity than bulk Bi₂WO₆ nanoparticle obtained by refluxing method for rhodamine B (Rh.B) degradation under visible light irradiation (λ > 400 nm).     

Effects of γ rays irradiation on structure and property of TiO2 thin films

TiO₂ thin films were deposited on a glass substrate by the radio frequency magnetron sputtering method, and annealed for 2 h at temperatures of 550°C. Then, ⁶⁰Co γ rays with different doses were used to irradiate the resulting TiO₂ thin films. The surface features of films before and after irradiation were observed by scanning electron microscope (SEM). Simultaneously, the crystal structure and optical properties of films before and after irradiation were studied by X-ray diffraction (XRD), UV–VIS transmission spectrum and Photoluminescence (PL) spectrum, respectively. The SEM analysis shows that the film is smooth with tiny particles on the film surface, and non-crystallization trend was clear after irradiated with γ rays. The XRD results indicated that the structure of the film at the room temperature mainly exists in the form of amorphous and mixed crystal at a sputtering power of 200 W, and non-crystallinity was more obvious after irradiation. Obvious difference can be found for the transmissibility of the irradiated and pre irradiation TiO₂ films by the UV-VIS spectra. The color becomes light yellow, and the new absorption edge also appeared at about 430 nm. PL spectra and photocatalysis experiments indicate that the photocatalysis degradation rate of the TiO₂ films on methylthionine chloride solution irradiated with the maximum dose can be increased to 90%.     

Research on the passive nuclear level gauge

ABSTRACT

Using the ‘quadruple combination detection’ automatic calibration method to solve the traditional passive nuclear ash hopper material level meter calibration problem. The method adopts the ‘contour multistage measurement’ mode, fitted the ratio of absorbed dose rate detected by adjacent cascade probe with corresponding actual material level after measurement, then use the fitting parameters to calibrate automatically which do not need ash hopper stop working, And this can effectively save the calibration time and cost. The method can effectively eliminate the material level measuring error brought by the changes of radioactive activity in the coal ash, which improve the measuring precision and material level positioning accuracy. There are many factors affecting the radioactive activity of coal ash which vary in Different feeding period, or after refueling. And this may cause measurement error and misinformation. Using quadruple combination detection and contour multistage measurement mode, when the radioactive activity in the coal ash changes, the passive nuclear meter level gauge can be revised according to the calibration curve or calibrated automatically. Which eliminated the effects brought by the changing of coal ash radioactive activity, saved onerous repeatedly calibration procedure, also improve the accuracy of the calibration, avoid misjudgment, and can improve the accuracy of measurement.     

Effect of Fe on the glass-forming ability,structure and devitrification behavior of Zr–Cu–Al bulk glass-forming alloys

We report on the glass-forming ability and devitrification behavior of Zr₆₀Cu₃₀Al₁₀, Zr₆₀Cu₂₅Al₁₀Fe₅ and Zr_62.5Cu_22.5Al₁₀Fe₅ bulk glass-forming alloys on heating. The effect of Fe addition on the structure of Zr–Al–Cu alloys is also discussed. Crystallization kinetics and structural changes in the glassy alloys were studied using X-ray diffraction, transmission electron microscopy, differential scanning and isothermal calorimetry methods. The results indicate that good glass-formers, such as Zr_62.5Cu_22.5Al₁₀Fe₅, are located somewhat beyond the equilibrium eutectic point. Possible phase separation in the supercooled liquid on heating and electron beam-induced in situ crystallization are observed and discussed.     

Spectral Database Systems: A Review

Abstract: Spectroscopy has been demonstrated to be an important method of analysis and detection. A spectral database system (SDBS) can not only satisfy the traditional requirements for spectral management but also provides several new functions, including spectra sharing on the website and web-based and real-time analysis and detection. Chemists and spectroscopists could analyze and detect pure materials and some mixtures rapidly with the help of standard SDBS, and now they are trying to improve these systems to fulfill rapid analysis for complex mixtures, even those as complex as agro-products. Overall, SDBS make it possible to analyze and detect unknown samples rapidly and nondestructively. This article focuses on significant progress in research on infrared (IR), near-infrared (NIR), and Raman SDBSs. Additionally, the drawbacks and obstacles of SDBSs are summarized and trends are discussed.     

Estimation of an important constant in sieve method

ζ _k is one of the most important constant in the sieve methods. This paper gives the relatively accurate lower bound and upper bound on it, that is, , wherec=1.22... andk>16.