Mössbauer effect in f.c.c. Fe-Ni-C alloys after the ultrasonic impact surface treatment

M?ssbauer spectroscopy was used for study of the f.c.c. Fe-30.5%Ni-1.5%C, Fe-30.0%Ni-1.3%C, Fe-30.1%Ni-0.44%Mn-1.22%C, Fe-30.3%Ni alloys after the heat treatment at 1373 K in vacuum and the impact ultrasonic surface treatment in vacuum. The vibration amplitude of the magnetostrictor-wave guide-sample system on the (1–3)kHz frequencies was 20 μm and 28 μm corresponding to the power of impacts of 2.4 and 4.7 J/s. In order to show the redistribution process of carbon under the treatment, the ageing of the Fe-30.0%Ni-1.3%C alloy was carried out at 773 K in vacuum. As shown, the ultrasonics of smaller power does not result in distinctive changes in the hyperfine magnetic structure and solid solution state. The increase of power of impacts does not change the phase composition of the alloys except the atomic redistribution in a solid solution varying the electron spin and charge densities on iron nuclei. The results were analyzed in comparison with the data derived after the low-frequency impact surface treatment. Presented at International Colloquium “M?ssbauer Spectroscopy in Materials Science”, Všemina, Czech Republic, June 1–4, 2004. The Science and Technology Center in Ukraine (project #2412) and partially budget program supported this work.     

Applying the finite-thickness model to designs of cylindrical microlenses with small -numbers

The finite-thickness model (FTM) is applied to the design of cylindrical microlenses based on the wave-front interference principle, rather than the existing zero-thickness model (ZTM). This design method is very simple in physics and highly efficient in computations. For cylindrical lenses with different f-numbers (from f/1.5 to f/0.6), the detailed designs by using both the FTM and the ZTM are carried out. To show the superiority of the FTM to the ZTM, we investigate the focal performance of all the designed lenses based on rigorous electromagnetic theory and the boundary element method. Numerical results reveal that the constructed cylindrical lenses by the FTM are witnessed to exhibit much better focusing performance than those by the ZTM, especially for the small f-numbers.     

Microwave-assisted synthesis and electrochemical capacitance of polyaniline/multi-wall carbon nanotubes composite

Polyaniline/multi-wall carbon nanotubes composite (PANI/MWNTs) was rapidly synthesized by microwave-assisted polymerization. Transmission electron microscope (TEM) image revealed that this composite was a core–shell structure with PANI layers (50–70 nm). Electrochemical behavior of the composite was evaluated by cyclic voltammetry (CV) and galvanostatic charge–discharge tests with a two-electrode system. An enhanced specific capacitance of 322 F/g with a specific energy density of 22 W h/kg was about 12 times that of MWNTs. This composite also exhibited a good rate capability, retaining up to 87% of initial capacity at a current density of 5 mA/cm².     

Excitation of a periodic cylindrical microstrip <Emphasis Type="Italic">N</Emphasis>-element antenna array

We consider the problem of excitation of a periodic cylindrical microstrip antenna array which consists of N elements placed periodically in the azimuthal plane on the surface of a dielectric substrate. Each element is an array of M patches having the rectangular-cylindrical shape. Each patch is fed by a rod which is approximately modeled by a charged filament of finite length. An integral equation for the surface current on the patches is formulated and solved by the method of moments in the spatial domain. Far-field patterns of the antenna are calculated for different values of N and M at the resonant frequencies. It is shown that a two-frequency N-lobe antenna having two different far-field patterns at two different resonant frequencies can be developed. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 50, No. 2, pp. 134–146, February 2007.     

稳态条件下气溶胶粒子在口腔模型中的沉淀率

以实际人体解剖学数据为基础,利用流体力学软件构建了口腔模型。由于口腔形状不规则,流场中会有湍流产生,所以本文选用的是k-ω方程。在此基础上,假设吸入空气流量为一个常量,改变吸入气体、气溶胶粒子的物理参数,以调整St数的变化,模拟不同情况下气溶胶粒子运动情况。由模拟结果可知:气溶胶粒子在口腔中的沉淀率受粒子半径、密度、及流速的影响,并随这些量的增加而增加;沉淀率可以视作St数的函数,并随St数的增加而增加;气溶胶粒子在口腔中的沉淀分布受模型几何形状和湍流的影响,在喉部附近沉淀较为明显;粒子在口腔中将沿怎样的轨迹运动则取决于粒子在入口处的初始位置。     

饲料添加剂唆乙醇的合成

本文研究了n奎乙醇的合成方法.由于采用较高效率的相转移催化剂和乙醇一水作重结晶溶剂，得到高纯度，高产率的喳乙醇.     

Determination of ionization constants of saccharides by capillary zone electrophoresis with amperometric detection

Summary A method based on a linear model enabling the efficient determination of the ionization constants (K _a) of saccharides by capillary zone electrophoresis with amperometric detection has been demonstrated. TheK _a values obtained from the plots of the reciprocal effective mobility against the inverse concentration of sodium hydroxide were in agreement with literature values.     

Structural anisotropy study by resonance Raman scattering in nematics with different dyes

The method for the structural anisotropy determination, which is based on a comparison of the degree of polarization of absorption and resonance Raman bands, is tested with three dyes having different molecular dimensions in one nematic liquid crystal. The experimentally observed correlation between the variation of the structural anisotropy factor and the order parameters deviates from the predictions of the Segre model. This method could also be applied to determine the local field anisotropy for liquid crystals, but we must take into account the observed dependence of the structural anisotropy on the dimensions of the probe molecules.     

强场下煤的13C NMR谱

由强场静态¹³C煤谱可以获得与低场魔角旋转高分辨谱相同的fa,从而避免了样品的快速旋转的要求,同时得到了高灵敏度。     

Effect of promoters on the behavior and properties of VPO catalysts for the selective oxidation of n-butane to maleic anhydride

A series of vanadyl pyrophosphate (VPO) modified by several additives has been investigated with the aim to reveal the promotion mechanism of the additives for selective conversion of n-butane to maleic anhydride (MA). Catalyst performance and various physicochemical characterization including XPS, XRD, FT-IR, DTA and BET indicated that the properties of additives, such as electronegativity and ion radius, contributed much to the effect of the additives on the structure and surface characteristics of VPO catalysts, and then influenced the catalytic behavior. The remarkable effects of additives on the surface vanadium and oxygen species were discussed. It was shown that maximum MA selectivity could be found with a moderate V⁵⁺ /V⁴⁺ ratio, and the catalytic activity and selectivity were improved, respectively, with the increase of surface active oxygen species, as well as as their amount and stability.