Cr3+的水解聚合作用的研究 Ⅺ.在顺丁烯二酸存在下的水解和聚合

在60℃和恒定离子强度下,用平衡法研究了0.004mol dm^-3Cr(NO₃)₃在三种不同浓度顺丁烯二酸H₂A(0.008,0.010,0.014mol dm^-3的水溶液中的状态,用计算机拟合和p.q.r分析方法得到了[Cr(OH)A₂]^2-,[Cr₂(OH)A₂]⁺[Cr₃(OH)₂A₂]⁺和CrA₃^3-四种水解产物,并计算了其平衡常数,在我们系列工作中研究了在宽广的Cr³⁺和顺丁烯二酸浓度下Cr³⁺的状态,共生成11种配合物,本文对其形成规律进行了讨论.     

重要生物微量元素和常见负电性元素在不同价态和电子组态下的轨道指数和电负性

本文用Xα方法计算出不同价态与电子组态下锰、铁、钴、铜、锌及钼等过渡族重要生物微量元素和氮、氧、氟、磷、硫、氯、硒和溴等常见负电性元素的数值原子轨道和轨道电负性值,再用数值拟合方法得出这些原子轨道的单ξ和双ξSlater型基函数的指数.研究了这些元素的原子所带电荷和电子组态对其原子轨道指数与轨道电负性的影响,给出了相应的回归公式.这些公式有较高的精确度,不但为研究这些元素化合物的电子结构提供基础参数,也为电荷自洽型的计算提供较可靠的计算公式.     

Characterization of dextransucrases fromLeuconostoc mesenteroides NRRL B-1299

Leuconostoc mesenteroides NRRL B-1299 dextransucrase was fractionated into soluble (SGT) and insoluble (IGT) enzyme preparations differing by their dextran content. In spite of this, they displayed the same Km for sucrose (10 g/L) and the same activation energy (35 kJ/mol). But the presence of cells and insoluble dextran led to the IGT behaving like an immobilized enzyme: stabilization against thermal denaturation and diffusional limitations at low substrate concentrations were observed. On the other hand, the behavior of SGT was influenced by the presence, in the preparation, of soluble dextran that reduced enzyme inhibition by excess substrate. SGT and IGT present very different pH profiles. In the presence of 4 g/L of soluble dextran, IGT was activated and displayed the same susceptibility to pH as SGT. The activation of IGT was highly dependent on the nature of the acceptor added but also on the pH of the reaction medium. IGT and SGT synthesize both soluble and insoluble polymer containing α(l → 2), α(l → 3), and α(l → 6) linkages. A larger amount of insoluble dextran is elaborated by SGT. The polymer structures, examined by¹³C NMR spectrometry, revealed that they differ mainly by their α(l → 3) linkage content (from 0 to 11%). This linkage seems to be partly responsible for the dextran insolubility and can be completely eliminated by carrying out the synthesis of soluble polymer at pH 7.4 with SGT.     

触头用银合金粉末的氧化性能和氧化后的组织结构

通过热重实验和扫描电子显微等方法，研究了４种触头用银合金粉末的氧化性能及氧化后的组织结构。发现Ａｇ－Ｓｎ－ＲＥ合金粉末氧化以后，在粉末表层形成一层纯银层，其组织结构理想；它的氧化性能最好，适于制备触头材料。Ａｇ－Ｓｎ－ＲＥ合金粉末的优良氧化性能与其氧化后理想的组织结构有关。稀土元素可以降低合金粉末的氧化温度，其它影响作用有待于进一步研究。     

Diagnosis of lung cancer based on metal contents in serum and hair using multivariate statistical methods

The classification of normal and cancer groups with four multivariate methods according to metal contents in serum and hair samples has been discussed in the present paper. Results show that the four multivariate methods, stepwise discrimination analysis, principal components analysis, hierarchical cluster analysis, and stepwise cluster analysis can distinguish the two groups correctly. The independent samples of both normal and cancer groups were tested and can be distinguished correctly by the four methods. Therefore, these methods can be used as an aid for diagnosis of lung cancer according to the metal contents in serum and hair samples.     

Preparation of a piezoelectric immunosensor for the detection of Salmonella paratyphi A by immobilization of antibodies on electropolymerized films

 To obtain new coatings for the preparation of piezoelectric immunosensors, the anodic polymerization of o-aminophenol (oAP), o-phenylenediamine (oPD) and m-phenylenediamine (mPD) onto a gold-plated crystal has been studied. The possibility of immobilizing an antibody (anti-S. paratyphi A) onto the crystal via the electropolymerized films was investigated. The poly-mPD film gave the best results for immobilizing the antibody. With antibodies crosslinked on the poly-mPD film, a piezoelectric immuno-assay for the detection of S. paratyphi A was proposed. The shift (ΔF=F_20s−F_400s, Hz) between the frequency at 20 s after the addition of sample (F_20s), and that of 400 s (F_400s) was used to construct a calibration graph, and shortening of the assay time was achieved. The S. paratyphi A concentration in the range of 10^5–10⁹ cells/ml can be measured by this method. Received: 9 May 1996/Revised: 6 September 1996/Accepted: 19 September 1996     

中空纤维催化膜反应器中环戊二烯的选择加氢反应

将聚乙烯吡咯烷酮（ＰＶＰ）负载钯催化剂（ＰＶＰ－Ｐｄ）镶嵌到三种醋酸纤维（ＣＡ）中空膜（ＣＡ－Ｉ，ＣＡ－Ⅱ，ＣＡ－Ⅲ）内制各中空纤维催化膜，并进一步制成催化膜反应器，在４０℃和０．１ＭＰａ的反应条件下，在催化膜反应器中进行了环戊二烯的选择加氢反应，考察了具有不同氢气渗透率的醋酸纤维丝组成的三种膜反应器对反应的转化率及选择性的影响，并在此基础上考察了各种反应参数对反应的影响，ＣＡ中空纤维催化膜对环戊     

过渡元素掺杂Fe_3O_4(001)表面磁电性能的理论研究

采用基于密度泛函理论的第一性原理方法,计算Fe_3O_4,Fe_3O_4(001)表面以及过渡元素掺杂表面的电子结构和磁性。结果表明Fe_3O_4的半金属性主要来源于B位Fe离子,并且Fe的3d轨道发生强烈自旋极化;比较(001)表面不同终端A和B终端的表面能和电子结构,得出两种终端稳定性存在差异且A终端较稳定同时表现半金属性;由过渡元素V、Cr、Mn、Co、Cu和Zn取代Fe_3O_4(001)表面A终端A位Fe进行掺杂,形成的6种新表面结构都保持了半金属性。对比它们的表面能和磁矩,Mn掺杂的表面结构最稳定并且磁矩明显增大。