Impact of North Korean nuclear weapons test on 3 September, 2017 on inland China traced by 14C and 129I

Journal of Radioanalytical and Nuclear Chemistry - Environmental impact of North Korea nuclear weapons testing on 3 Sept, 2017, is of key concern. In order to investigate whether there is...     

受限空间油气爆燃火焰形态

通过受限空间油气爆燃可视化实验发现，在不同初始油气体积分数下，爆燃火焰呈现出不同的表观特征，据此提出了受限空间油气爆燃的3种火焰形态，即光滑球形火焰、褶皱球形火焰和卷曲絮状火焰。分析了3种火焰形态的形成机理，并通过实验观测与理论分析，给出了区分3种火焰形态的临界条件。结合实验中采集到的关键参数，总结了不同的火焰形态下受限空间油气爆燃的反应产物、最大压力、升压速率、反应时间、火焰强度等关键参数的特征与变化规律。     

A simple LC‐MS method for determination of cyasterone in rat plasma: application to a pilot pharmacokinetic study

A simple, specific, and sensitive liquid chromatography–mass spectrometry (LC‐MS) method for determination of cyasterone in rat plasma was developed in our laboratory. Cucurbitacin B was used as an internal standard (IS). After protein precipitation with twofold volume of acetonitrile, the analyte and IS were separated on a Luna C₁₈ column (100 × 4.6 mm, i.d., 3.0 µm; Phenomenex) by isocratic elution with acetonitrile–water (80:20, v/v) as the mobile phase at a flow rate of 0.4 mL/min. An electrospray ionization source was applied and operated in the positive ion mode; selected ion monitoring scan mode was used for quantification, and the target ions m/z 543.3 for cyasterone and m/z 581.3 for IS were chosen. Good linearity was observed in the concentration range of 0.40–400 ng/mL for cyasterone in rat plasma. Intra‐day and inter‐day precision were both <7.4%. This method was proved to be suitable for pharmacokinetic studies after oral (5.0 mg/kg) or intravenous (0.5 mg/kg) administration of cyasterone in rats. Copyright © 2015 John Wiley & Sons, Ltd.     

C0 conjugacy between PM functions with nonmonotonicity height equal to 1

In this paper, a topological classification of piecewise monotone functions(abbreviated as PM functions) with nonmonotonicity height equal to 1 which are strictly increasing on their characteristic intervals and have finitely many fixed points is presented.     

Theoretical and experimental studies on a compact stretcher with large spectral bandwidth and high transmission efficiency

To ensure safe and effective amplification for the chirped pulse amplification laser facility, many factors such as pulse spectral width, pulse duration, grating parameters and incidence angle parameter are considered carefully in the design of the pulse stretcher. A compact four pass Offner stretcher design is given out. Experiment results show that the stretcher has broad spectral width, large stretching ratio and high transmission efficiency. By comparison, the calculated result of the dispersion effect on the pulse duration is completely consistent with the experiment result.     

Mechanically strong and stiff supramolecular polymers enabled by fiber reinforced long-chain alkane matrix

Fiber-reinforced-concrete (FRC) mechanism refers short discrete fibers that are uniformly distributed and randomly oriented, which offers an effective way to improve the mechanical performance of concrete. In the design of supramolecular polymers, an analogous concept of FRC appears to have been considered very rarely-although fibrous structure has been frequently observed/generated during the supramolecular polymerization. In this work, we apply the alkane thermosets, octadecane (C₁₈H₃₈) and tetracosane (C₂₄H₅₀), taking the role of “concrete”, and the low-molecular-weight monomer with long alkyl chains as the essential “fiber” component, to fabricate the “fiber reinforced supramolecular polymer”. Very much like FRC mechanism in material science, the resulting fiber reinforced supramolecular polymer thus exhibit unusually high mechanical strength and stiffness, which is unprecedented in the conventional supramolecular strategy.     

Promoting the Phosphidation Process using an Oxygen Vacancy Precursor for Efficient Hydrogen Evolution Reaction

Based on previous works, most of the transition metal phosphides (TMPs) were directly prepared by decomposing NaH₂PO₂ with the precursors at high temperatures, which resulted in different degrees of phosphidation in the final product. Therefore, it is necessary to design an innovative approach to enhance the degree of phosphidation in the material using crystal defects. Here, oxygen-vacancy iron oxide/iron foam (Ov-Fe₂O₃/IF) was firstly prepared by generating oxygen vacancy in situ in an iron foam through heating in vacuum conditions. Subsequently, FeP/IF was formed by phosphating Ov-Fe₂O₃/IF. Under the effects of oxygen vacancies, oxygen-vacancy iron oxide could be completely phosphatized to produce more active sites on the surface of the material. This, in turn, could result in a catalyst with exceptional hydrogen evolution activity. Thus, the successful fabrication of FeP/IF demonstrated in this work provides an effective and feasible way for the preparation of other high-efficiency catalysts.     

LWE from non-commutative group rings

Designs, Codes and Cryptography - The Learning-With-Errors (LWE) problem (and its variants including Ring-LWE and Module-LWE), whose security are based on hard ideal lattice problems, has proven to...     

Two-Dimensional Germanium Sulfide Nanosheets as an Ultra-Stable and High Capacity Anode for Lithium Ion Batteries

Lithium ion batteries (LIBs) at present still suffer from low rate capability and poor cycle life during fast ion insertion/extraction processes. Searching for high-capacity and stable anode materials is still an ongoing challenge. Herein, a facile strategy for the synthesis of ultrathin GeS₂ nanosheets with the thickness of 1.1 nm is reported. When used as anodes for LIBs, the two-dimensional (2D) structure can effectively increase the electrode/electrolyte interface area, facilitate the ion transport, and buffer the volume expansion. Benefiting from these merits, the as-synthesized GeS₂ nanosheets deliver high specific capacity (1335 mAh g⁻¹ at 0.15 A g⁻¹), extraordinary rate performance (337 mAh g⁻¹ at 15 A g⁻¹) and stable cycling performance (974 mAh g⁻¹ after 200 cycles at 0.5 A g⁻¹). Importantly, our fabricated Li-ion full cells manifest an impressive specific capacity of 577 mAh g⁻¹ after 50 cycles at 0.1 A g⁻¹ and a high energy density of 361 Wh kg⁻¹ at a power density of 346 W kg⁻¹. Furthermore, the electrochemical reaction mechanism is investigated by the means of ex-situ high-resolution transmission electron microscopy. These results suggest that GeS₂ can use to be an alternative anode material and encourage more efforts to develop other high-performance LIBs anodes.