激光等离子实验中的低能X射线时间谱解谱方法

利用快速Fourier变换(FFT)算法和反卷积原理对Dante谱议测量波形进行了回推获得了激光等离子体源区低能X射线辐射时间波形。解谱方法采用了W.N.Mcelroy等人提出的SANDⅡ解谱方法并与文献[6]中介绍的限幅迭代和周期性光滑技术相配合计算出了能谱时间关系的16分区结果,给出了1989年6月LF-12强激光装置实验的双束靶、漏靶诊断口,入射口的X射线时间谱以及辐射温度时间关系T_R(i)。     

Dynamical fluctuations in fragmentation reactions in a Boltzmann–Langevin approach

Based on the isospin-dependent Boltzmann–Langevin model, the dynamical fluctuations in the fragmentation reaction of ¹¹²Sn+¹¹²Sn are investigated. The quadrupole moment and octupole moment with zero magnetic quantum number have large fluctuations in the early time of the collisions. The dynamical fluctuations in momentum space show a strong dependence on the incident energy. The effects of using different fluctuations on the fragment cross sections are also studied in the fragmentation reactions. The results by using Q₂₀ + Q₃₀ fluctuation have a better agreement with the experimental data. Calculations using Q₂₀ + Q₃₀ fluctuation produce more proton-rich and neutron-rich nuclei than those using Q₂₀ fluctuation only. Besides, the difference between the production cross sections of fragments calculated by using Q₂₀ and Q₂₀ + Q₃₀ fluctuations is larger in the vicinity of the projectile. These results present that the dynamical fluctuations may affect the whole dynamical process of fragmentation reactions including the production of fragments, due to the nonlinear nature of the Boltzmann–Langevin equation.     

Amorphous High-Entropy Hydroxides of Tunable Wide Solar Absorption for Solar Water Evaporation

The high-entropy materials have raised much attention in recent years due to their extraordinary performances in mechanical, catalysis, energy storage fields. Herein, a new type of high-entropy hydroxides (e.g., NiFeCoMnAl(OH)_x) that are amorphous and capable of broad solar absorption is reported. A facile one-pot co-precipitation method is employed to synthesize these amorphous high-entropy hydroxides (a-HEHOs) under ambient conditions. The a-HEHOs thus obtained display widely tunable bandgap (e.g., from 2.6 to 1.1 eV) due to their high-entropy and amorphous characteristics, enabling efficient light absorbance and photothermal conversion in the solar regime. Further solar water evaporation measurements show that the a-HEHOs delivered a considerable energy conversion efficiency of 55%, comparable to black titanium oxides that are synthesized using more complex and expensive methods.     

Au-Nanoparticle-Array/Aligned-Ag-Nanowire-Based Flexible Dual Plasmonic Substrate for Sensitive Surface-Enhanced Raman Scattering Detection

The fabrication of flexible surface-enhanced Raman scattering (SERS) substrates for sensitive detection on uneven or irregular surfaces is challenging. In this study, a flexible dual plasmonic SERS (FDPS) substrate rationally constructed using Au nanoparticle (AuNP) arrays/aligned Ag nanowires (AgNWs) and elastic polyurethane (PU) is demonstrated. It exhibits high sensitivity (detection limit of 10⁻⁸ m for melamine and 10⁻¹⁰ m for malachite green) and excellent reproducibility. The well-designed structure of AuNP arrays/aligned AgNWs fabricated using block copolymer self-assembly and oil–water–air interfacial self-assembly successfully enhances the electromagnetic field through plasmonic coupling. In addition, the FDPS substrate retains a high SERS sensitivity after exposure to air at room temperature for 30 days because of the high stability of AuNP arrays and antioxidation characteristic of the PU covered on the aligned AgNWs. Even after undergoing stretching, bending, and twisting for 100 cycles, the FDPS substrate maintains a stable SERS activity owing to the introduction of the elastic PU. This study demonstrates a potential application of SERS detection under practical conditions for irregular surfaces and may be helpful in the development of flexible sensors.     

数字束流位置探测器通道自动增益校准方法的研究与实现

在现有硬件基础上,基于BPM测量准确度的需求,在自制的电子学FPGA芯片内,通过Verilog语言实现了一种数字BPM采样数据增益自动校准的设计。首先介绍了自动增益校准模块的系统总体设计;然后对模块的实现方法做了详细说明,设计并搭建了ADC数据自动增益校准测试平台以验证自动增益较准模块的功能;最后介绍了该设计在BPM通道标定中的应用。实验结果表明,该方法可以实现4通道增益一致,使ADC采样后的数据幅度相同,有效解决了由通道增益不一致引起的测量偏差,以及工程应用中ADC数据幅度校准工作量大且难于操作的问题,将在BPM系统通道自动标定中发挥重要作用。     

Pure single line oscillation of HF lasers in fine atmospheric window

Applied Physics B - A correction to this paper has been published: https://doi.org/10.1007/s00340-021-07611-y     

Multi-Focus Image Fusion Method Based on Multi-Scale Decomposition of Information Complementary

Multi-focus image fusion is an important method used to combine the focused parts from source multi-focus images into a single full-focus image. Currently, to address the problem of multi-focus image fusion, the key is on how to accurately detect the focus regions, especially when the source images captured by cameras produce anisotropic blur and unregistration. This paper proposes a new multi-focus image fusion method based on the multi-scale decomposition of complementary information. Firstly, this method uses two groups of large-scale and small-scale decomposition schemes that are structurally complementary, to perform two-scale double-layer singular value decomposition of the image separately and obtain low-frequency and high-frequency components. Then, the low-frequency components are fused by a rule that integrates image local energy with edge energy. The high-frequency components are fused by the parameter-adaptive pulse-coupled neural network model (PA-PCNN), and according to the feature information contained in each decomposition layer of the high-frequency components, different detailed features are selected as the external stimulus input of the PA-PCNN. Finally, according to the two-scale decomposition of the source image that is structure complementary, and the fusion of high and low frequency components, two initial decision maps with complementary information are obtained. By refining the initial decision graph, the final fusion decision map is obtained to complete the image fusion. In addition, the proposed method is compared with 10 state-of-the-art approaches to verify its effectiveness. The experimental results show that the proposed method can more accurately distinguish the focused and non-focused areas in the case of image pre-registration and unregistration, and the subjective and objective evaluation indicators are slightly better than those of the existing methods.     

各向异性蜂窝夹芯材料的电磁传输性能分析算法研究

蜂窝夹芯结构作为天线罩最常用的透波材料, 其电各向异性特征对电磁传输性能具有不可忽略的影响. 本文基于各向异性蜂窝夹芯材料对电磁波水平极化和垂直极化分量的有效介电常数, 建立了多层蜂窝夹芯材料的等效传输线网络传输方程, 并给出了其传输系数的计算公式.该计算公式由于考虑了材料的三维各向异性特征, 不仅理论上可以计算多层各向异性介质板对任意方向入射电磁波的传输系数, 而且能够揭示出材料方向角对传输性能的影响规律.同时, 通过传输线网络等效, 其计算效率远高于有限元等方法.数值算例表明, 本方法能够有效地揭示蜂窝夹芯材料的各向异性对其传输性能的影响, 计算结果在入射角为0°–80° 时与有限元法符合很好. 关键词： 电磁传输性能 电各向异性介质 蜂窝夹芯材料     

基于电化学与热能的耦合关系演算聚合物锂离子动力电池的温度状态及分布

基于电化学-热耦合模型研究聚合物锂离子动力电池放电过程热行为, 分析了放电倍率、冷却条件对电池放电过程的温度变化及分布的影响规律. 结果表明: 3C放电时, 模型计算结果与实测结果的平均偏差为0.57 K, 方差为0.15, 说明模型准确度较高. 电芯的平均生热率在整个放电过程中呈现出增加的趋势, 初期和末期增长较快. 大倍率放电时, 与电流密度的平方呈正比的不可逆热所占的比重较大, 小倍率放电时, 电化学反应可逆热占主导. 改善冷却条件能降低电池放电过程的平均温度, 对流传热过程的表面传热系数为5 W/(m²·K), 1 C, 3 C, 5 C放电结束时, 电芯的平均温升为分别为6.46 K, 17.67 K, 27.53 K, 当对流传热过程的表面传热系数增加至25 W/(m²·K)时, 温升比自然对流条件下相同倍率放电时的温度分别降低了2.91 K, 4.68 K, 5.62 K, 但电芯温度分布的不一致性也会加剧. 关键词： 电化学 耦合 锂离子动力电池 温度分布     

Structures and stabilities of the donor–acceptor complexes HXPY (X=Al,B; Y=H,F, OH)

The optimized geometries, complexation energies, etc. of HXPY (X?=?Al, B; Y?=?H, F, OH) donor–acceptor complexes have been investigated at the B3LYP/6-311+G(d,p), MP2/6-311+G(d,p) and/or CCSD(T)/6-311+G(d,p) levels. The results show that HBPY (Y?=?H, F, OH) is more stable than the corresponding HAlPY (Y?=?H, F, OH), F (or OH) substitution on phosphorus results in decreasing complex stability, and the stronger the electron-attracting nature of the substitution atom, the more stable the complex. Moreover, the thermodynamic and kinetic properties of the formation reaction of these donor–acceptor complexes were also examined within the temperature range 200–800?K using the general statistical thermodynamics and Eyring transition state theory with Wigner correction. It is concluded that the formation of HBPY is thermodynamically favoured over that of the corresponding HAlPY, especially at low temperature, and is kinetically favoured over that of the relevant HAlPY (Y?=?H, F, OH), especially at high temperature.