共轭二烯烃定向加成研究进展

以1,3-丁二烯为代表的共轭二烯烃是重要的有机合成原料,在有机合成领域有重要的应用价值.综述了以1,3-丁二烯等为代表的共轭二烯烃定向加成的研究进展,并展望了其发展和应用前景.     

不同的烧结工艺对Sm-Co2∶17型高温磁体性能的影响

采用中频感应熔炼法制备了Sm( Co0.79 Fe0.09 Cuo.085 Zr0.032) 7.95合金,采用传统烧结工艺,在1200 ～1240℃烧结1h,1165 ～1190℃固溶处理3h,快速风冷淬火后在840 ℃保温12h,以0.4 ·min-1的冷速冷却至420℃,保温10h,最后随炉冷却.磁体经过加工后,采用不同的磁性测试手段对磁体进行测试.结果表明,磁体的剩磁随烧结温度的升高而增大,矫顽力最好的工艺为1230℃烧结1h,然后在1180℃固溶3h.将此工艺制备的磁体采用中国计量科学院NIM-500C超高温永磁测量仪测试,磁体在773 K时的最大磁能积为10.94 MGOe,高于已经报道的同Z值的2∶17型永磁体.磁体的磁滞回线通过振动样品磁强计( VSM)测得,室温下Br=10.5 kGs,Hcj=30.21 kOe,(BH)max=25.60MGOe; 773 K时磁体Br=7.45 kGs,Hcj=6.02 kOe,(BH) max=9.85 MGOe.剩磁温度系数α=-0.0624％·℃-1,矫顽力温度系数β=-0.169％·℃-1.     

Experimental Study on Wave Characteristics of Stilling Basin with a Negative Step

Stilling basin with a negative step is an important structure in hydraulic systems, because it can avoid atomization and decrease scouring problems. Although stilling basins with a negative step have attracted much attention from researchers, few researchers have focused on the wave characteristics. In this research, an experimental study on the wave characteristics of stilling basins with a negative step was carried out. The wave height, average period, wave probability density and power spectrum along the flow direction of different stilling basins with a negative step were described based on the wave theory, and the results indicate discharge and step height have a significant effect on the wave characteristics. The relationships between the different characteristic wave heights, and the empirical formula for the relative characteristic wave height are obtained. Finally, the dimensionless standard deviation at the end of the stilling basin with a negative step is linearly related to the flow-energy ratio and the relative step height under B-jump.     

Controllably Growing Topologies in One-shot RAFT Polymerization via Macro-latent Monomer Strategy

The controlled and efficient synthesis of polymers with tailored topologies is challenging but important for exploring structure/property research. Herein, we proposed a concept of macro-latent monomer to achieve the controlled growth of polymer topologies.The macro-latent monomer was installed by a dynamic furan/maleimide covalent bond at the chain terminal. One-shot reversible additionfragmentation chain transfer(RAFT) polymerization of styrene and the macro-latent monomer created controlled growth of polymer topologies.Low temperature such as 40 ℃ could not activate the macro-latent monomer and thus the polymerization created the homo-polystyrene. By contrast, high temperature of ～110 ℃ activated the macro-latent monomer, and a maleimide-terminated macro-monomer was released via the retro-Diels Alder reaction. This macro-monomer immediately joined the cross polymerization with styrene and thus produced the side chains. By delicately manipulating the polymerization temperature, the predetermined placement of the macro-latent monomer-derived polymeric sidechains created controllably growing topologies, including star-, π-shaped, and density-variable grafting copolymers. This work paved a new way for creating on-demand topologies and would greatly enrich the topology synthesis.     

透氢钯复合膜的原理、制备及表征

钯及其合金膜由于具有透氢性好和耐高温的特点,除了用作氢气分离和纯化器外,还可以用作脱氢、制氢等反应的反应器,以实现反应和分离的一体化,并提高转化率和选择性。本文综述了钯基复合膜的原理、制备及表征,并重点介绍了本研究组的光催化镀膜工艺。     

气相色谱/质谱分析烟草中的主要生物碱

用毛细管气相色谱法测定烟草中烟碱、降烟碱、麦斯明、二烯烟碱、新烟碱、去氢新烟碱、2,3′-联二吡啶、可替宁8种主要生物碱的方法。烟草样品经二氯甲烷/甲醇(V/V,3∶1)萃取,过一次性滤膜,进样,经DB-5MS毛细管柱分离,由气相色谱-氢火焰离子化检测器(FID)检测定量,质谱定性。该方法操作简单,重现性好,回收率较高。8种生物碱相对标准偏差为2.59%~7.07%;回收率为89.4%~98.7%。     

“包埋”极性官能团固定相对碱性化合物分离的热力学研究

以苯、吡啶、尼古丁和普鲁卡因为探测因子,考察了酰胺型、胺型、醚型和酯型4种"包埋"极性官能团的新型键合固定相对碱性化合物在流动相pH值分别为3.0和7.0时的热力学焓变.实验结果表明,新型固定相由于烷基分子链中"嵌入"极性官能团,因此在流动相pH为3.0时温度对碱性溶质的保留影响相互差异较大.在流动相pH为7.0时,根据Van′t Hoff方程计算出4种待测物质从流动相转移到固定相上的ΔH0,从ΔH0的绝对值大小、相关系数以及实际的分离效果可以发现,在分离强碱性物质时,若实验条件一样,则分离效果是酰胺型和胺型＞酯型固定相＞醚型固定相,但它们均优于传统的固定相.