Anionic Conduction in Blends of Poly(Pyridinium Ethyl Methacrylate Perchloride) and Poly[Oligo(Oxyethylene) Methacrylate-Co-Acrylamide]

Abstract

Blends of poly(pyridinium ethyl methacrylate perchloride) and poly[oligo(oxyethylene) methacrylate-co-acrylamide] were prepared, and the ionic conductivity and mobility of the blends were investigated. Results indicate that both the transference of perchlorate anion and the dissociation of the polymeric salt in the comblike polyether obey the thermoactivation mechanism, and that the perchlorate anion in the blends is free.     

Characterization of Nitro-Substituted Polybenzimidazole Synthesized by the Reaction with Nitric Acid

Abstract

Nitro-substituted poly[2,2′-(m-phenylene)-5,5′-bibenzimidazole]s (PBIs) were synthesized by the reaction of PBI with nitric acid in sulfuric acid under various conditions. The number of nitro groups substituted on the aromatic ring of PBI per polymeric unit varied from 1.44 to 3.55 according to the reaction conditions. An increase in reaction temperature and concentration of the nitric acid increased the degree of substitution. The inherent viscosity of the substituted polymer increased as the reaction temperature decreased. When the reaction temperature was 30°C, the inherent viscosity of the polymer increased as the concentration of nitric acid increased. The nitro-substituted PBI exhibited polyelectrolyte behavior in formic acid. The nitro groups substituted on PBI were dissociated when the polymer was heated to 450°C, displaying exothermic behavior, and the decomposition of polymer was proportional to its nitro group content. All nitro-substituted PBIs showed better solubilities in polar aprotic and acidic solvents, such as dimethylacetamide, dimethylsulfoxide, dimethylformamide, N-methylpyrrolidone, formic acid, sulfuric acid, and trifluoromethanesulfonic acid.     

Single-Ion Conduction and Electrochemical Characteristics of Poly (Oxyethylene)/ Lithium Methoxy Oligo(Oxyethylene) Sulfate Blend

Abstract

The ion conduction of a blend of poly(oxyethylene) (PEO) and lithium methoxy oligo(oxyethylene) sulfate (SAL₈) and its electrochemical characteristics were studied. The maximum ambient conductivity of the blend reaches 1.2 × 10^?6 S/cm. The blend exhibits single-ion conduction, excellent mechanical performance, and electrochemical stability. A battery of Li/PEO + SAL₈/Li_1+xV₃O₈ has a constant discharge capacity at different discharge current densities up to a certain voltage, while the discharge capacity of Li/P (MEO_16-AM) + LiClO₄/Li_1+xV₃O₈ decreases with an increase of the discharge current density.     

Identification of reducing and nonreducing neutral carbohydrates by laser‐enhanced in‐source decay (LEISD) MALDI MS

In this work, laser‐enhanced in‐source decay (LEISD) technique of matrix‐assisted laser desorption/ionization Fourier transform ion cyclotron resonance mass spectrometry (MALDI‐FT‐ICR‐MS) was used to distinguish reducing and nonreducing carbohydrates. Interestingly, easier cleavage of (1 → 2)‐linked glycosidic bonds for nonreducing carbohydrates containing D‐fructofuranosyl units was observed in MALDI‐FT‐ICR‐MS, which was in agreement with the result of theoretical calculation by the software package Gaussian 09. Importantly, no cross‐ring cleavage of fructofuranosyl residues was detected in the LEISD spectra of nonreducing carbohydrates. LEISD method therefore offers an attractive alternative for fast and efficient differentiation of reducing and nonreducing carbohydrates, and the positions of nonreducing monosaccharide residues in a carbohydrate chain could be easily speculated. Copyright © 2013 John Wiley & Sons, Ltd.     

Evaluating a four-directional benzene-centered aliphatic polyamine curing agent for epoxy resins

A four-directional benzene-centered aliphatic polyamine, MXBDP, with high functionality and low volatility, is used to cure epoxy resin (DGEBA). Herein we originally report the isothermal cure kinetics and dynamic mechanical properties of DGEBA/MXBDP. Differential scanning calorimetry confirms that MXDBP is more reactive than commercial linear metaxylenediamine and branched Jeffamine T-403 and the isothermal curing reaction is autocatalytic. The Kamal model is found to be able to well describe the curing rate up to the onset of diffusion control, and the excellent match over the whole conversion range is achieved using the extended Kamal model. Interestingly, the isoconversional kinetic analysis indicates that the effective reaction activation energy (E _α ) changes substantially with conversion, and ultimately decreases to a very small value (<10 kJ mol^?1) because of the diffusion-controlled reaction kinetics. Then, dynamic mechanical analysis reveals that DGEBA/MXBDP exhibits the higher α- and β-relaxation temperatures and the much higher crosslink density than DGEBA/metaxylenediamine. Our experiment results support that MXBDP has the high reactivity and improved thermal resistance in combination with the advantages of the high functionality, low volatility and decreased CO₂ absorption. Therefore, MXBDP may be especially suitable for room temperature-cure epoxy coatings and adhesives.     

石墨烯基铁氧化物磁性材料的制备及在水处理中的吸附性能

石墨烯及其衍生物氧化石墨烯均有良好的物理和化学性质,其巨大的表面积和丰富的官能团使其成为良好的吸附材料。石墨烯基磁性材料则综合了石墨烯的吸附能力和磁性材料易分离的特性,是水处理过程中具有巨大应用潜力的吸附材料。本文在论述了石墨烯、氧化石墨烯及铁氧化物磁性材料对水体中的重金属离子、有机染料及含苯环的芳香类污染物的吸附富集性能的基础上,重点介绍了石墨烯基铁氧化物磁性材料的不同合成方法及复合材料在水处理中去除污染物的能力,探讨了复合材料在水处理中的应用前景。     

氢化物发生-原子荧光光谱法同时测定水中砷和锑

建立在硝酸介质中用氢化物发生-原子荧光光谱法同时测定水中砷和锑的方法。优化了仪器工作条件、酸度、硼氢化钾及还原剂浓度。砷、锑的线性范围为0～10．0μg／L;检出限分别为0．02,0．01μg／L;测定结果的相对标准偏差分别为1．77％～3．72％,2．95％～4．87％（n=6）;加标回收率分别为98％106％,96％105％。该法操作简便,灵敏度高,快速,便于推广,适用于水中砷和锑的同时测定。     

Facile Fabrication of Zirconia Modified Screen‐Printed Carbon Electrodes for Electrochemical Sensing of Phosphate

We report here a facile method to immobilize zirconia nanoparticles on a disposable screen‐printed carbon electrode (designated as ZrO₂‐SPCE) for phosphate sensor application. Simply by ultrasonicating a bare SPCE in a ZrO₂ slurry, ZrO₂ nanoparticles can be immobilized effectively on the electrode surface as verified by surface characterization evidences. Using ferricyanide as a redox probe, an increase in the charge transfer resistance (R_ct) of ferricyanide upon adsorption of phosphate on ZrO₂ is used for the determination of phosphate. This ZrO₂‐SPCE phosphate sensor shows a wide linear range up to 1 mM and a detection limit of 1.69 µM (S/N=3). Practical applicability of the ZrO₂‐SPCE is demonstrated by detecting phosphate content in human blood samples.     

Performance evaluation of polycyclic aromatic hydrocarbons analysis in sediment from proficiency testing with metrological reference values

This paper describes a metrological approach to evaluate the measurement capability of laboratories participating in two proficiency testing (PT) programmes involving the analysis of five polycyclic aromatic hydrocarbons (PAHs) in sediment samples. Reference values of PAHs in the programmes for performance assessment were obtained from an accurate isotope dilution gas chromatography mass spectrometry (ID-GCMS) method which was thoroughly validated and verified. Isotope dilution mass spectrometry (IDMS) technique usually has a well-defined measurement uncertainty budget and a traceability link to an International System of Units. Provision of the metrological reference values in PT enables the establishment of a technical platform to assess the actual competence of the participating laboratories in sediment PAHs analysis. Results of the PT programmes showed that about 80 % of the laboratories employed gas chromatography in their analyses and the remaining used liquid chromatography. Irrespective of the techniques being used, however, the majority of the participating laboratories were observed to underestimate values in which the mean values of the five reported PAHs were less than those of the ID-GCMS-derived reference values by 13–20 %. Only 41–44 % of the participating laboratories were able to achieve satisfactory z-scores. The present study revealed that the reinforcement of the capability for accurate measurement of PAHs in sediment samples in laboratories worldwide should be addressed.