可控硅外特性的研究

开发和推广可控硅特性研究的物理实验,意在启发学生对物理实验的趣味性和思考方法,让学生在实验课中根据观察到的现象和实验数据在实验课后进行分析,最后判断并得出结论.     

共轭高聚物双分子结构中激子电致解离的动力学研究

通过绝热动力学方法,研究了共轭高聚物双分子结构中激子对外加电场的响应.当外电场强度超过某个临界值时,激子会被解离成一对自由的电子与空穴.对于双分子结构中的激子,其临界解离电场除了受电子与电子相互作用以及电声相互作用影响之外,还受分子间相互作用的影响.由动力学演化的计算得到,激子临界解离电场强度随分子间相互作用强度的增大而呈非线性降低;随电子与电子相互作用强度的增大呈非线性减小的变化;但是,随电声耦合强度的增大却呈现出线性增大的变化.     

High-performance all-solid-state electrolyte for sodium batteries enabled by the interaction between the anion in salt and Na3SbS4

All-solid-state sodium batteries with poly(ethylene oxide) (PEO)-based electrolytes have shown great promise for large-scale energy storage applications. However, the reported PEO-based electrolytes still suffer from a low Na⁺ transference number and poor ionic conductivity, which mainly result from the simultaneous migration of Na⁺ and anions, the high crystallinity of PEO, and the low concentration of free Na⁺. Here, we report a high-performance PEO-based all-solid-state electrolyte for sodium batteries by introducing Na₃SbS₄ to interact with the TFSI⁻ anion in the salt and decrease the crystallinity of PEO. The optimal PEO/NaTFSI/Na₃SbS₄ electrolyte exhibits a remarkably enhanced Na⁺ transference number (0.49) and a high ionic conductivity of 1.33 × 10⁻⁴ S cm⁻¹ at 45 °C. Moreover, we found that the electrolyte can largely alleviate Na⁺ depletion near the electrode surface in symmetric cells and, thus, contributes to stable and dendrite-free Na plating/stripping for 500 h. Furthermore, all-solid-state Na batteries with a 3,4,9,10-perylenetetracarboxylic dianhydride cathode exhibit a high capacity retention of 84% after 200 cycles and superior rate performance (up to 10C). Our work develops an effective way to realize a high-performance all-solid-state electrolyte for sodium batteries.

A high-performance all-solid-state PEO/NaTFSI/Na₃SbS₄ electrolyte for sodium batteries is realized owing to the electrostatic interaction between TFSI⁻ in the salt and Na₃SbS₄, which immobilizes TFSI⁻ anions and promotes the dissociation of NaTFSI.     

Narrowband blue emission with insensitivity to the doping concentration from an oxygen-bridged triarylboron-based TADF emitter: nondoped OLEDs with a high external quantum efficiency up to 21.4%

Blue thermally activated delayed fluorescence (TADF) emitters that can simultaneously achieve narrowband emission and high efficiency in nondoped organic light-emitting diodes (OLEDs) remain a big challenge. Herein, we successfully design and synthesize two blue TADF emitters by directly incorporating carbazole fragments into an oxygen-bridged triarylboron acceptor. Depending on the linking mode, the two emitters show significantly different photophysical properties. Benefitting from the bulky steric hindrance between the acceptor and terminal pendants, the blue emitter TDBA-Cz exhibited a high photoluminescence quantum yield (PLQY) of 88% in neat films and narrowband emission. The corresponding non-doped blue device exhibited a maximum external quantum efficiency (EQE) of 21.4%, with a full width at half maximum (FWHM) of only 45 nm. This compound is the first blue TADF emitter that can concurrently achieve narrow bandwidth and high electroluminescence (EL) efficiency in nondoped blue TADF-OLEDs.

A donor–acceptor TADF emitter showed narrowband high-efficiency blue emission by fine molecular modulation. The corresponding OLEDs exhibited a maximum EQE of 21.4% and a small FWHM of 45 nm, representing the most efficient nondoped blue TADF-OLEDs.     

Enhanced transmission through periodic arrays of subwavelength holes: the role of localized waveguide resonances

By using the rigid full-vectorial three-dimensional finite-difference time-domain method, we show that the enhanced transmission through a metallic film with a periodic array of subwavelength holes results from two different resonances: (i) localized waveguide resonances where each air hole can be considered as a section of metallic waveguide with both ends open to free space, forming a low-quality-factor resonator, and (ii) well-recognized surface plasmon resonances due to the periodicity. These two different resonances can be characterized from electromagnetic band structures in the structured metal film. In addition, we show that the shape effect in the enhanced transmission through the Au film with subwavelength holes is attributed to the localized waveguide resonance.     

Saturation field direction dependence of domain structures in NiFe elements

The domain structures in NiFe elements were studied by magnetic force microscopy measurement and micromagnetic modeling. The remanent states in the elements were dependent on the direction of the saturation field. The “S” and “U” states were observed at remanence by applying the saturation field at different directions. The “S” and “U” states are metastable: magnetic force microscopy tip field-induced switching from the “S” and “U” states to the flux closure configuration was observed.     

角分辨光电子能谱光束线1200line/mm光栅研制

国家同步辐射实验室新建了覆盖5～40 eV的低能区高分辨率角分辨光电子能谱光束线.其球面光栅单色仪包含了三块光栅,即300,600和1200 line/mm球面层式(Laminar)光栅.采用全息离子束刻蚀工艺,在硅光栅基片上成功地刻蚀出1200 line/mm、占空比0.35、槽深35 nm、有效刻划面积大于120 ...     

Q-switched mode-locking femtosecond all-fiber laser based on Er3+/Yb3+ codoped phosphate fiber

A Q-switched mode-locking femtosecond all-fiber laser based on a 2 cm long homemade Er³⁺/Yb³⁺ codoped phosphate glass fiber has been reported. By using the nonlinear polarization evolution technique, a nearly 100% modulation depth of mode-locking pulse train is achieved. At a pump power of 410 mW, the energy of each Q-switched envelope, whose width is about 220 μs, is 10 μJ, while the duration of mode-locking pulse within the Q-switched envelope is 318-fs.     

Dual-axes differential confocal microscopy with high axial resolution and long working distance

We discover that the slight transverse offset of a point detector results in a shift of the axial intensity response curve in a dual-axes confocal microscopy (DCM). Based on this, we propose a new dual-axes differential confocal microscopy (DDCM) with high axial resolution and long working distance, in which two point detectors are placed symmetrically about the collection axis. And a signal is obtained through the differential subtraction of two signals received simultaneously by the two point detectors. Theoretical analyses and preliminary experiments indicate that DDCM is feasible and suitable for the high precision tracing measurement of microstructures and surface contours.     

Film thickness dependence of electro-optic effect in epitaxial BaTiO3 thin films

Based on the phenomenological Landau-Devonshire theory, we investigate the film thickness dependence of ferroelectric and electro-optic properties of epitaxial BaTiO₃ thin films grown on SrTiO₃ and MgO substrates. By using the effective substrate lattice parameter concept, the film thickness dependence of misfit strain is incorporated into the theory. Therefore, the film thickness dependence of ferroelectric and electro-optic properties in epitaxial BaTiO₃ thin films can be explained. Moreover, a large quadratic electro-optic effect was obtained in the BaTiO₃ thin films, which is in good agreement with the experimental result of BaTiO₃ thin films on the MgO substrate.