Rigid rod anchored to infinite membrane

We investigate the shape deformation of an infinite membrane anchored by a rigid rod. The density profile of the rod is calculated by the self-consistent-field theory and the shape of the membrane is predicted by the Helfrich membrane elasticity theory [W. Helfrich, Z. Naturforsch. 28c, 693 (1973)]. It is found that the membrane bends away from the rigid rod when the interaction between the rod and the membrane is repulsive or weakly attractive (adsorption). However, the pulled height of the membrane at first increases and then decreases with the increase of the adsorption strength. Compared to a Gaussian chain with the same length, the rigid rod covers much larger area of the membrane, whereas exerts less local entropic pressure on the membrane. An evident gap is found between the membrane and the rigid rod because the membrane's curvature has to be continuous. These behaviors are compared with that of the flexible-polymer-anchored membranes studied by previous Monte Carlo simulations and theoretical analysis. It is straightforward to extend this method to more complicated and real biological systems, such as infinite membrane/multiple chains, protein inclusion, or systems with phase separation.     

Amphiphilic miktoarm star copolymers can self-assemble into micelle-like aggregates in nonselective solvents: a case study of polyoxometalate based miktoarm stars

It is well-known that amphiphilic star-shaped copolymers can self-assemble in selective solvents to form complicated micellar constructs as a synergistic result of both the topological constraints and relative volume fractions of the arms. Although the association phenomena of amphiphilic stars have been observed in nonselective solvents, both the structural detail and formation mechanism of these associates are not clear yet. Moreover, these experimental observations are controversial with respect to molecularly dispersed starlike copolymers in nonselective solvents as is popularly believed. To clarify these issues, we have synthesized a series of polyoxometalate-based polystyrene-poly(ethylene glycol)(PS-PEG) miktoarm star supramolecular copolymers(SEW-1–5) by coupling a Keggin-type polyoxometalate of K_4[α-SiW_(12)O_(40)] with 1,2,3-triazolium bridged block copolymers of-PS_n-b~+-PEG_mI~-(n=17, 26, 39, 57, 81; m=45) through ionic exchange reactions, respectively. TEM imaging,contact angle and ~1H NMR studies reveal that SEW-2–5 self-assemble in chloroform, THF, and toluene to create micellelike aggregates ranging from cylinder to sphere with a PS corona and a PEG core, while for SEW-1, reverse bilayers are captured with a PEG corona and a PS core. Among these aggregates, the Keggin clusters of [α-SiW_(12)O_(40)]~(4-) localize at the core-corona interfaces between PS and PEG. In terms of solvent quality, chloroform, THF, and toluene are only slightly poorer for PEG than that for PS with a relative order of chloroformTHFtoluene. These unexpected aggregates originate from the topological constraints of the chemically different arms of PS and PEG in the miktoarm stars, where the weak incompatibility between the PS and PEG arms is intensified appropriately. The presence of the reverse bilayered structures of SEW-1 is due to the magnified steric hindrance of the PEG45 arm with decreasing the molecular weight of the PS17 arm. However, to the best of our knowledge,these are the first examples clearly indicating that miktoarm star copolymers can self-assemble in common good solvents or slightly selective solvents to generate micellelike aggregates. This scenario is not only in sharp contrast to the intuitively considered behavior of unimolecular miktoarm stars in nonselective solvents, but also rather different from the conventional selfassembly behavior of amphiphilic star copolymers in selective solvents.     

聚醚氨酯的氧化及其接枝共聚合的研究

本文研究了在聚醚氨酯表面上进行接枝共聚合的新方法。首先在聚醚氨酯薄膜上通过过氧化氢光氧化引入过氧化氢基,然后在还原剂亚铁盐或N,N-二甲基对甲苯胺的作用下引发丙烯酰胺接枝共聚合,反应具有低温快速的特点。产物经吸水性实验及扫描电子显微镜观察均证实了是一接枝共聚物。通过模型化合物的研究证明,接枝反应具有较高的选择性,接枝共聚占优势地发生在聚醚软段上,接枝地点很可能就在醚键旁的α-碳原子上。     

甲基丙烯酸2-羟乙酯水溶液聚合与硫氰化钠的效应

<正> 甲基丙烯酸2-羟乙酯(HEMA)是一带有羟基的功能性单体,它可以在自由基聚合引发剂如过氧化苯甲酰、偶氮二异丁腈、过氧化二碳酸二异丙酯或氧化还原引发体系过硫酸盐-乙酸二甲胺基乙酯的作用下进行自由基聚合,我们已报道带有羟基的单体如HEMA、甲基丙烯酸羟丙酯(HPMA)及甲基丙烯酯3-甲氧基-2-羟丙酯(MHPMA)可用     

双酚-S-双(3-甲基丙烯酰氧基-2-羟丙基)醚的聚合及其应用

以MMA为起始原料经转变为GMA,再与双酚-S反应合成了一种新的含有砜基的交联剂BisS-GMA。这种双酚-S型交联剂与MMA可以顺利地用紫外光或BPO-胺体系引发聚合。新的双酚-S型交联剂BisS-GMA与双酚-A型交联剂Bis-GMA相比,具有活性高与粘结强度高两个显著优点。它还可以和二氧化硅填料混合组成复合树脂,经光引发或BPO-DHET体系引发聚合,得到的复合树脂其物性已达到国外同类产品的水平。DHET作为促进剂要比DMT性能好,前者配制的交联剂液体组份贮存稳定性好,经半年后而不“失活”,后者配制的液体组份则在较短的时间内“失活”。     

Preparation and Characterization of Nanoscopic Organic Semiconductor of Oxovanadium Phthalocyanine

Nanoscopic particles of oxovanadium phthalocyanine (VOPc, phase-II) with different particle sizes are prepared by aggregation of VOPc molecules in the presence of surfactants for the first time. A size effect in the region of nanoscale was observed in the UV-visible spectra. The photoconductivity of the nanoscopic VOPc is much higher than that of bulk VOPc. Copyright 1999 Academic Press.     

用丘氏气提定氮器测定植物中的氮

研究了用气提滴定法测定植物中氮的条件和方法．实验结果表明，与蒸馏法相比，方法简便安全，结果准确     

配合物聚合反应研究──Ⅱ.以二氨基磺磷酸盐配合物合成聚脲

以二氨基磺酸盐配合物合成了一系列主链上合金属元素(Ca,Ni,Co,Cu)的聚脲聚合物。用IR和1HNMR对其结构进行了表征,以TG-DTA研究了其热性能,并讨论了金属元素种类及其含量对聚脲聚合物溶液粘度的影响。     

固相萃取光度法测定饮用水中挥发酚的研究

研究了用Waters Sep-Park-C18小柱固相萃取光度法测定饮用水中挥发酚的方法。水样中经水汽蒸馏分离后的挥发酚，用4－氨基安替比林显色，显色产物可用C18固相萃小柱萃取、乙醇洗脱后用分光光度法测定。方法污染小，操作简便，便于批量样品处理，用于饮用水中挥发酚的测定，结果令人满意。     

Recent progress in nanomaterial-enhanced fluorescence polarization/anisotropy sensors

In this review, we summarize the number of scientific publications in the field of FP/FA sensor in recent five years, and introduce the recent progress of FP/FA sensor based on nanomaterial. The various analytical applications of FP/FA sensor based on nanomaterial are discussed. We also provide perspectives on the current challenges and future prospects in the promising field.