ZnSe、ZnS量子点的可控合成与表征

采用改进后的合成方法,以Se和ZnO粉末为原料,在十六胺(HDA)、月桂酸(LA)和三辛基膦(TOP)有机溶剂体系中合成了胶体ZnSe和ZnS量子点。主要研究了溶剂配比、反应温度及生长时间对ZnSe量子点粒径和光学性质的影响。结果表明:制得的ZnSe和ZnS量子点均是纤锌矿型结构,且具有较好的尺寸均匀性、分散性及荧光特性。粒子直径可控制在4.5~8 nm范围内。采用参数n(ZnO) : n(HDA) : n(LA)=1 : 2.1 : 5.2,c(TOPSe)=1 mol/L,在280 ℃成核,240 ℃生长条件下合成的ZnSe量子点具有最佳的尺寸范围,并且随着生长时间的延长,粒径变大,荧光发射峰明显红移。     

Towards the decays of Nx（1625） the molecular picture

In this talk, we firstly overview the experimental status of Nx（1625）, which is an enhancement structure observed in K-3. invariant mass spectrum of J/ψ → pK-∧. process. Then we present the result of the decay of Nx（1625） under the two molecular assumptions, i.e. S-wave∧K- and S-wave ∑0K- molecular states. Several experimental suggestions for Nx （1625） are proposed.     

制冷系统的广义预测控制方法研究

制冷系统的蒸发器过热度的控制对于制冷系统稳定、高效运行具有重要作用。文中通过实验辨识了基于过热度和蒸发温度的制冷系统多输入多输出模型,并采用广义模型预测控制方法,针对制冷系统的变负荷运行工况下进行了实验研究。结果表明,该方法很好的适应了制冷系统变过热度、变蒸发温度的控制要求,相比常规的单输入单输出PID控制,跟踪性能良好、动态控制精度高,可以适应制冷系统负荷大范围变动的控制需求。     

板条增益介质波前畸变诊断方法

对波前重构算法中的区域法进行了改进,使其能够应用于板条增益介质的波前畸变诊断。利用该方法对47块Nd: YAG板条增益介质沿厚度方向波前畸变进行测量,指出镀膜和加工等环节对增益介质的波前畸变可能造成的影响。按照波前畸变峰谷（PV）值对测量结果进行了统计,结果表明:增益介质造成的静态波前畸变参差不齐,测量样本中静态畸变PV值最多可达5 m以上,且仅有4.1%的增益介质静态畸变PV值小于1 m。通过选取某些增益介质使之级联,测量其组合波前畸变,发现在系统中使用两块波面互补的增益介质有助于减小系统的静态波前畸变。     

快速凝固Cu-Pb过偏晶合金的性能表征

研究了Cu-Pb过偏晶合金的急冷快速凝固组织特征,定量表征了快速凝固Cu-Pb过偏晶合金的电阻率和力学性能,理论分析了冷却速率和组织形态对合金性能的影响规律. 研究结果表明,在急冷快速凝固条件下,Cu-Pb过偏晶合金中的(Cu)相和(Pb)相均以枝晶方式生长,晶体形态以均匀细小的等轴晶为特征. 随着冷却速率增大,一方面,凝固组织显著细化,晶界增多,对自由电子的散射作用增强,合金电阻率显著增大;另一方面,细晶强化作用增强,合金的抗拉强度呈线性升高,同时,伴随着晶体缺陷数量的增多,合金的伸长率降低. 关键词： Cu-Pb过偏晶合金 快速凝固 电阻率 力学性能     

Influence of switchable magnetic field on the modulation property of nanostructured magnetic fluids

Magnetic fluid is a kind of colloidal material with tunable microstructure and unique optical properties. The tunable magneto-optical modulation property of magnetic fluid under externally switchable magnetic field with various modulation periods is investigated theoretically and experimentally. The transitional modulation period (lower limit of the working frequency) between the square-like and oscillation-like modulation is achieved and found to be magnetic-field- and sample-concentration-dependent. The modulation mechanism is analyzed and ascribed to the dynamic microstructure of magnetic fluid under different modulation periods of external magnetic fields. The result of this work may be helpful for the pragmatic applications of magnetic fluid based on the square-like modulation.     

Enhanced mechanism of catalytic ozonation by ultrasound with orthogonal dual frequencies for the degradation of nitrobenzene in aqueous solution

The experiments have been performed with a semi-continuous batch reactor to investigate the degradation efficiency of nitrobenzene in aqueous solution by ultrasound with the different orthogonal dual frequencies catalytic ozonation. The introduction of ultrasound can enhance the degradation efficiency of nitrobenzene compared to the results obtained from the processes of ozonation alone and ultrasound alone. The degradation of nitrobenzene is found to be zero-order in the two systems of ultrasound alone, and the reactions follow the pseudo-first-order kinetic model in the processes of ozone alone and ozone/ultrasound. The investigation confirms that the degradation of nitrobenzene follows the mechanism of hydroxyl radical (^•OH) oxidation, and the enhancement function is even more pronounced in the presence of ultrasound with the greater difference between the orthogonal dual frequencies due to the obvious synergetic effect between ozone and ultrasound, which increases the utilization efficiency of ozone, and accelerates the initiation of ^•OH and the formation of H₂O₂, resulting in the rapid formation of an increasing diversity of byproducts and the advancement degree of mineralization of total organic carbon (TOC). The oxidative byproducts have been, respectively identified in the different processes selected, including o, p, m-nitrophenols, phenol, malonic acid, 4-nitrocatechol, nitrate ion, maleic acid, oxalic acid, hydroquinone, p-quinone, 1,2,3-trihydroxy-5-nitrobenzene and acetic acid.     

脉冲激光频域干涉技术在超快动力学物理中的应用

介绍了一种具有fs时间分辨力的超短脉冲激光频域干涉测试技术,详细论述了该技术的工作原理和系统构成,指出传输时间差和相位差是影响频域干涉条纹周期的主要因素。采用脉冲激光频域干涉仪测量了200 nm厚度铝膜在波长800 nm、单脉冲能量0.7 mJ、脉宽35 fs脉冲激光作用下的运动速度剖面。在单次飞秒脉冲激光作用下,铝膜自由面的运动速度峰值可达960 m/s,速度剖面的上升前沿小于5.77 ps,表明脉冲激光频域干涉技术可用于测量材料在超快脉冲激光作用下的冲击动力学参数。     

飞行器供配电系统地面通用测试接口设计

供配电地面测试负责为飞行器提供模拟供电、控制状态切换、采集并传输系统状态信息,配合完成全飞行器全周期的综合测试任务。本文首先简要介绍了供配电地面测试系统的基本功能和设备组成,然后对供电、控制、测量的接口设计进行分析,最后提出接口通用化设计方案。本文为电气系统地面通用化测试研究提供了有益尝试。     

近红外光谱分析中建模校正集的选择

将极大线性无关组的概念及方法引入近红外光谱分析,探讨了在建立定量分析模型时代表性样品,即校正集样品的选择问题。以2 652个烟末样品为实验材料,随机选取1 001个样品构成预测集,其余1 651个样品为代表性样品备选集。用Matlab软件求出代表性样品备选集光谱矩阵的极大线性无关组,以此作为代表性样品,构成建模的校正集。用PLS回归法建立了烟末样品总糖含量定量分析的预测模型,并将模型用于预测集中1 001个烟末样品总糖含量的预测分析。实验结果表明,当选择的校正集包含的样品数量大于32时,所建各模型对预测集样品预测的平均相对误差均小于4%,平均相关系数大于0.96。其中选择32个代表性样品和146个代表性样品所建模型定量分析预测集中各样品的总糖含量,两个结果经统计检验没有显著性差异(α=0.05),说明求极大线性无关组的方法用于校正集样品的选择,可实现“少而精”选择样品的目的。此外,我们用求极大线性无关组选择校正集样品和随机方法选择校正集样品两种方法,选择了同样数目28,32,41,76,146,163个样品建模进行预测效果的对比实验,结果显示,求极大线性无关组法选择校正集建模的预测效果优于随机选择校正集建模的预测效果。