Biosorption of copper(II) and zinc(II) from aqueous solution by Pseudomonas putida CZ1

To study Pseudomonas putida CZ1, having high tolerance to copper and zinc on the removal of toxic metals from aqueous solutions, the biosorption of Cu(II) and Zn(II) by living and nonliving P. putida CZ1 were studied as functions of reaction time, initial pH of the solution and metal concentration. It was found that the optimum pH for Zn(II) removal by living and nonliving cells was 5.0, while it was 5.0 and 4.5, respectively, for Cu(II) removal. At the optimal conditions, metal ion biosorption was increased as the initial metal concentration increased. The adsorption data with respect to both metals provide an excellent fit to the Langmuir isotherm. The binding capacity of living cells is significantly higher than that of nonliving cells at tested conditions. It demonstrated that about 40-50% of the metals were actively taken up by P. putida CZ1, with the remainder being passively bound to the bacterium. Moreover, desorption efficiency of Cu(II) and Zn(II) by living cells was 72.5 and 45.6% under 0.1M HCl and it was 95.3 and 83.8% by nonliving cells, respectively. It may be due to Cu(II) and Zn(II) uptake by the living cells enhanced by intracellular accumulation.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

4-羟基联苯4’-甲酸-L-2-甲基丁醇酯的合成

以4-羟基联苯，4-羟基4’-氰基联苯和手性L-2-甲基丁醇为原料，通过三条路线合成了铁电性液晶中间体4-羟基联苯4’-甲酸-L-2-甲基丁醇酯。5步法（醚化、酰化、溴仿、水解和酯化）总收率35．6％；3步法（酰化、溴仿和酯化）总收率50．7％；而以4-羟基-4＇-氰基联苯为原料的一步合成法收率64．4％。中间体和目标产物的结构经^1H NNR和IR确证。     

MCM-41-HY复合分子筛的合成及其在深度加氢脱硫中的应用

在水热条件下合成了包覆型MCM-41-HY复合分子筛.采用XRD、N2气吸附和SEM等方法对其进行了表征.结果表明,MCM-41-HY复合分子筛和MCM-41与H型Y沸石(HY)的机械混合物明显不同,在复合分子筛MCM-41-HY中,中孔相MCM-41附晶生长在HY沸石上,将HY包覆起来.以二苯并噻吩为模型化合物,考察了该材料担载NiMo催化剂的加氢脱硫活性.结果表明,MCM-41-HY复合分子筛与MCM-41和HY的机械混合物担载NiMo催化剂的加氢脱硫(HDS)活性相当,但MCM-41-HY复合分子筛担载NiMo催化剂的裂化活性较低.其裂化活性不同的原因在于其载体孔道结构和酸性位的分布不同.     

脯氨酸催化的甲基酮与a-酮酸酯间的不对称Aldol反应

以脯氨酸为催化剂，实现了甲基酮与a-酮酸酯间的不对称Aldol反应，以43%-93%的产率和最高达81％的ee得到多种a-羟基酸酯。空间效应看来是影响反应活性和选择性的一个重要因素。丙酮表现出比丁酮高的反应活性，而在某些情况下 丁酮则呈现更高的对映选择性。     

水相中乙醇对胶体泡沫性质的影响

用不同比例的水-乙醇混合物作水相制备了胶体泡沫（CLA）,实验观察并测定了CLA的形态、粒径分布、半衰期、Zeta电位、水相溶液的粘度和水相/油相之间的界面张力等性质.结果表明，水相中加入乙醇会影响CLA的稳定性和粒径大小,但对CLA的Zeta电位影响不大.乙醇对CLA稳定性的影响主要是由于乙醇分子嵌入到界面膜中导致膜的强度变化以及水相粘度发生变化导致CLA粒子间隙的排液过程发生变化.     

Preparation ,Structural Characterization and Luminescent Property of Binucleasr Silver（Ⅰ）Complex Formed by Benzotriazole and 1—Hydroxymethyl Benzotriazole

Dinuclear silver (I) six‐membered ring complex [Ag₂ (bta)₂ ‐(hmbta)₂] (ClO₄)₂ (3) has been synthesized by the reaction of benzotriazole (bta) (1) and 1‐hydroxymethyl benzotriazole (hmbta) (2) with Ag (CH₃CN)₄ClO₄. The structures of compound 2 and Complex 3 have been studied by single crystal X‐ray diffraction analysis. The change of luminescent intensity of 1, 2 and 3 was reported. Compound 2 crystallizes in the monoclinic system with space group P2 (1)/c, a = 0.7655 (10) nm, b = 1.0126 (14) nm, c =0.9502 (13) nm, β = 95.07 (2)°, V = 0.7337 (17) nm³ and Z = 4. Complex 3 crystallizes in the triclinic system with space group P1, a = 0.73611 (18) nm, b = 0.9152 (2) nm, c = 1.2277 (3) nm, β = 87.170 (5)°, V = 0.8221 (3) nm³ and Z = 1. The main structural feature of complex 3 is a symmetric dinuclear six‐membered ring formed by two silver (I) atoms and four N‐atoms from two benzotriazoles. The second structural feature of complex 3 is the τ‐τ stacking interaction between two adjacent molecular planes, which forms the two‐dimentional layer structure. Besides, compared with 2, the luminescent intensity of complex 3 shows a remarkable enhancement.     

Catalytic combustion of chlorobenzene over V2O5/TiO2 catalysts prepared by the precipitation-deposition method

Catalytic combustion of chlorobenzene over supported vanadium oxides has been investigated. TiO₂ was prepared by the sol-gel method from titanium isopropoxide. The supported vanadium oxide catalysts have been prepared by precipitation-deposition and impregnation method and characterized by XRD, FT-Raman and TPR. In the VO_x/TiO₂catalysts prepared using the impregnation method, when vanadium loading reaches 3 wt.%, the activity shows a maximum. However, in the VO_x/TiO₂catalysts prepared by precipitation-deposition, when vanadium loading reaches 7 wt.%, the activity shows a maximum. This result suggests that the precipitation-deposition can yield a higher metal loading on the support and a high dispersion compared to the impregnation method. This revised version was published online in August 2006 with corrections to the Cover Date.     

配合物Cu(phen)2 (dca)2的合成及晶体结构

合成了配合物Cu(phen)2 (dca)2(phen=C12H8N2为1,10-邻菲啰啉,dca-为二氰基氨基阴离子),用IR对其结构进行了初步表征,并测定了配合物的晶体结构.该晶体属单斜晶系,空间群为P21/c;晶胞参数a=0.8869(2)nm,b=1.4691(2)nm,c=1.9298(2)nm,β=100.90(1)°;V=2.4691(8)nm3,Z=4,F(000)=1132.00,Dc=1.496g/cm3,R=0.051,RW=0.068.中心铜(Ⅱ)离子分别与两个phen中的四个N原子和两个dca-的两个N原子配位,形成六配位的变形八面体结构.     

Cell detection based on protein array using modified glass slides

A protein array for cell detection was fabricated by spotting different antibodies on modified glass slides. Glass slides were modified to allow antibodies to be immobilized on it and to selectively bind antigens. Antibodies were specially selected with the cells to be detected as targets, which permitted target cells in samples to bind specifically to the array with little nonspecific binding. Results can be obtained by directly putting the samples onto the array for 1 h or a little longer to let the cells specifically interact with the antibodies. After washing the unbound samples away, images were observed with a microscope and captured with a CCD camera. The assessment of antibody-cell binding was evaluated by capturing red blood cells (RBCs) in human blood with blood group antibodies (anti-A and anti-B). Blood group antibodies were spotted on the modified glass slide and kept at 4<.deg> degrees C overnight for immobilization. Human blood samples diluted to different concentrations were used to examine the sensitivity and specificity of the method.