Nondestructive interface construction for CdS-buffered ZnO nanorod/Cu<Subscript>2</Subscript>O composite structure solar cells

In this work, ZnO nanorod/Cu₂O composite nanostructure solar cells were prepared using hydrothermal growth and electrodeposition. The CdS layer was added between ZnO and Cu₂O to suppress carrier reverse recombination. Nondestructive interface deposition methods were employed to prepare CdS and Cu₂O functional layers. The CdS layers were unconventionally deposited in non-alkaline solution, which can inhibit etching on the ZnO surface, and Cu₂O layers were electrodeposited in ZnO-buffered alkaline solution which can also inhibit etching on the ZnO surface. Finally, the performance of solar cells was improved by adding a highly resistive CdS intermediate layer between ZnO and Cu₂O layers. This work demonstrated the nondestructive interface approach of chemical solution deposition of functional layers on ZnO and possibilities for further improvements to the performance of Cu₂O-based nanostructure solar cells with the addition of an intermediated layer.     

Investigation on Properties of Polypropylene/Multi-walled Carbon Nanotubes Nanocomposites Prepared by a Novel Eccentric Rotor Extruder Based on Elongational Rheology

The properties of polymer matrix composites are related not only to the chemical composition of the materials but also to the processing equipment used for their preparation which has a direct influence on the microstructure of the composites. In this paper polypropylene (PP)/multi-walled carbon nanotubes (MWCNTs) nanocomposites were prepared by melt blending through a self-developed, eccentric rotor extruder (ERE). The structure and elongational deformation mechanism of an ERE were described in detail. The morphological, rheological, thermal and mechanical properties of the resulting PP/MWCNTs nanocomposites were investigated. Scanning electron microscopy (SEM) and rheological analysis showed that the MWCNTs were well dispersed in the PP matrix. The thermal stability was investigated by thermogravimetric analysis (TGA) and indicated that the addition of MWCNTs could effectively improve the thermal stability of pure PP. The percentage of crystallinity and tensile strength of the composites were improved as a result of the heterogeneous nucleation effect of the MWCNTs in the PP matrix. The research results revealed that the enhancement of the properties of PP/MWCNTs composites could be attributed to a better dispersion of the MWCNTs in the matrix as compared to samples prepared by conventional extrusion.     

Neural network applied to reconstruction of complex objects based on fringe projection

The neural network has been introduced into the reconstruction of the complex object based on fringe projection. In this method, the neural network with powerful property of approximation is used to get the continuous approximate function of a discrete fringe pattern captured by an image frame grabber. The depth-related phase of the measured object modulated into the fringe pattern can be demodulated by dealing with the approximate function. Compared with the Fourier transform profilometry (FTP), in the network method, one deformed fringe pattern is needed to reconstruct the tested object, and a high spatial resolution is maintained for no filtering process. Therefore, this method performs better than FTP in the measurement of the complex object. Moreover, the network method is capable of demodulating more depth-related phase even in the case that the local shadow exists in the fringe pattern. Computer simulations and experiments validate the feasibility of this method.     

A lateral super-resolution differential confocal technology with phase-only pupil filter

In order to achieve a higher lateral resolution required for ultraprecision measurement of microstructural workpieces, phase-only pupil filtering differential confocal microscopy (PFDCM), a new approach is proposed based on the differential confocal microscopy (DCM), which uses a three-zone phase-only pupil filter with lateral super-resolution capability obtained through optimized design to change the distribution of DCM three-dimensional point spread function, so that the DCM lateral resolution is therefore significantly improved while its axial resolution is slightly improved. Preliminary experimental comparison and analyses indicate that, the lateral and axial resolutions of PFDCM are better than 0.2 μm and 2 nm, respectively, when wavelength of incidence laser beam , numerical aperture of measuring lens NA=0.85, and lateral spot size with a three-zone phase-only pupil filter G_T=0.65. It is therefore concluded that PFDCM is a new approach to further improvement of lateral resolution in laser probe measurement systems.     

品质因数的多重内涵及其教学探讨

从正弦激励下线性二阶系统的微分方程出发,结合阻尼振子的受迫振动以及RLC串联、并联谐振电路等具体物理情境,剖析了品质因数Q在频率特性、能量转换以及系统各物理参数等多个层次上的内涵,进而探讨如何更好地为工科各专业学生讲授品质因数这一概念.     

Fabrication of concave microlens arrays using controllable dielectrophoretic force in template holes

This Letter presents a method for fabricating concave microlens arrays of UV-curable polymer by using the dielectrophoresis (DEP) force. The DEP force, generated by a voltage between the patterned conductive template and substrate, acting on the polymer-air interface, can drive the dielectric liquid polymer into the template holes and change the shape of the polymer-air interface. The upper polymer surface of fabricated microlens is super smooth, which can reduce optical noise. The upper surface geometry is measured approximately as parabolic in general, which can lead to a negligible spherical aberration, compared to spherical surfaces.     

High pressure X-ray diffraction study of SrMnO3 perovskite

Using a diamond anvil cell device and synchrotron radiation, the in-situ high-pressure structure of SrMnO3 has been investigated. At pressure up to 28.6 GPa, no pressure-induced phase transition is observed. The lattice parameters as a function of pressure is reported, and the relationship of the axial compression coefficients is β<,a>> β<,c>. The isothermal bulk modulus K<,298>=266(4) GPa is also obtained by fitting the pressure- volume data using the Murnaghan equation of state.     

Reference-free Shack-Hartmann wavefront sensor

The traditional Shack-Hartmann wavefront sensing (SHWS) system measures the wavefront slope by calculating the centroid shift between the sample and a reference piece, and then the wavefront is reconstructed by a suitable iterative reconstruction method. Because of the necessity of a reference, many issues are brought up, which limit the system in most applications. This Letter proposes a reference-free wavefront sensing (RFWS) methodology, and an RFWS system is built up where wavefront slope changes are measured by introducing a lateral disturbance to the sampling aperture. By using Southwell reconstruction two times to process the measured data, the form of the wavefront at the sampling plane can be well reconstructed. A theoretical simulation platform of RFWS is established, and various surface forms are investigated. Practical measurements with two measurement systems-SHWS and our RFWS-are conducted, analyzed, and compared. All the simulation and measurement results prove and demonstrate the correctness and effectiveness of the method.     

Entry distribution, fission barrier, and formation mechanism of 254102No

The entry distribution in angular momentum and excitation energy for the formation of 254No has been measured after the 208Pb(48Ca,2n) reaction at 215 and 219 MeV. This nucleus is populated up to spin 22Planck's over 2pi and excitation energy greater, similar6 MeV above the yrast line, with the half-maximum points of the energy distributions at approximately 5 MeV for spins between 12Planck's over 2pi and 22Planck's over 2pi. This suggests that the fission barrier is greater, similar5 MeV and that the shell-correction energy persists to high spin.     

三代微光和超二代微光夜视技术的研究和开发

介绍三代微光和超二代微光夜视技术的发展概况：阐明了它们各自的原理、技术特点和关键课题；着重指出了两者间的异同和相互联系。