Control of mesoporous structure of aerogels derived from cresol-formaldehyde

Polycondensation of a cresol mixture (C(m)) with formaldehyde (F) in basic aqueous solutions leads to formation of highly cross-linked C(m)F aquagels that can be supercritically dried with carbon dioxide to form organic C(m)F aerogels. Aerogels synthesized with different catalyst contents and reactant concentrations are characterized by low-temperature nitrogen adsorption. The present experimental results suggest that the C(m)F aerogels are typical mesoporous materials and have almost no micropores in bulk. The microstructure of the organic C(m)F aerogels can be controlled and tailored effectively by varying synthesis conditions during the initial sol-gel process. C(m)F organic aerogels with specific surface area as high as 627 m(2)/g and corresponding pore volume 2.06 ml/g have been obtained with a dominant pore size of 30 nm. C(m)F organic aerogels with peaky pore size distributions concentrated at 11 nm have also been prepared.     

Aculeoside I, a novel 18,19-seco-ursane saponin isolated from Ilex aculeolata

A novel 18,19-seco-ursane saponin, aculeoside I (1), in addition to four known saponins were isolated from the leaves of Ilex aculeolata Nakai and identified by using spectroscopic and chemical methods. The structure of the new saponin was established as 3,19-dihydroxyl-16,21-epoxy-18,19-seco-13(18)-urs-ene-28-oic-acid-19-O-alpha-L-rhamnopyranosyl-(1 --> 2)-alpha-L-arabinopyranoside.     

Influence de la structure sur les proprietes mesomorphes de polyesters—III

A new homogous series of thermotropic mesomorphic polyesters with high inherent viscosity has been synthesized. Mesogenic elements

are separated by flexible spacers CO(CH₂)_nCO in the backbone. A study of their mesomorphic properties is reported.     

The uranium-Xylidyl Blue I complex and its application in linear sweep polarography

The linear sweep polarographic wave of the uranium-Xylidyl Blue I complex in ethylenediamine-1,10-phenanthroline-hydrochloric acid medium has been studied. The complex, corresponding to UO(2)(XBI)(2-)(2) with log beta' = 9.09 (by polarography), 8.81 (by spectrophotometry), is strongly adsorbed on the surface of the mercury electrode. The polarographic wave is attributed to the reduction of Xylidyl Blue I in the complex. The method is very sensitive with a detection limit of 3 x 10(-8)M. The wave height is proportional to the concentration of uranium over the range 8 x 10(-8)-7 x 10(-6)M. Solvent extraction is used to separate possible interferences. The recommended procedure has been applied to the determination of trace amounts of uranium in ores.     

Fluoro-substituted DPP-bisthiophene conjugated polymer with azides in the side chains as ambipolar semiconductor and photoresist

Photoresists are essential for the fabrication of flexible electronics through all-photolithographic processes. Single component semiconducting photoresist exhibits both semiconducting and photo-patterning properties, and as a result, the device fabrication process can be simplified. However, the design of semiconducting polymeric photoresist with ambipolar semiconducting property remains challenging. In this paper, we report a single component semiconducting photoresist (PFDPPF4T-N₃) by incorporating azide groups and noncovalent conformation locks into the side alkyl chains and conjugated backbones of a diketopyrrolopyrrole-based conjugated polymer, respectively. The results reveal that PFDPP4FT-N₃ exhibits ambipolar semiconducting property with hole and electron mobilities up to 1.12 and 1.17 cm² V^?1 s^?1, respectively. Moreover, field effect transistors with the individual photo-patterned thin films of PFDPPF4T-N₃ also show ambipolar semiconducting behavior with hole and electron mobilities up to 0.66 and 0.80 cm² V^?1 s^?1, respectively. These results offer a simple yet effective design strategy for high-performance single component semiconducting photoresists, which hold great potential for flexible electronics processed by all photolithography.

     

苯胺气相N－烷基化反应研究Ⅱ．苯胺和乙醇常压催化合成N－乙基苯胺的工业应用

苯胺气相Ｎ－烷基化反应研究Ⅱ．苯胺和乙醇常压催化合成Ｎ－乙基苯胺的工业应用陈骏如，李瑞祥，韩银仙，李贤均（四川大学化学系成都６１００６４）Ｎ－乙基苯胺是制造染料、塑料、炸药和医药等许多化工产品的重要中间体，其合成方法过去多采用无机酸催化剂，如Ｈ＿２Ｓ...     

2-(8-quinolylazo)-7-phenylazochromotropic acid as an analytical reagent

2-(8-Quinolylazo)-7-phenylazochromotropic acid (QAPAC) has been synthesized by coupling diazotized 8-aminoquinoline with 2-phenylazochromotropic acid as well as by coupling diazotized aniline with 2-(8-quinolylazo)chromotropic acid. The properties of QAPAC and the spectrophotometric characteristics of some metal-QAPAC complexes are reported.     

Electrogenerated Chemiluminescence Based on Tris(2,2′-bipyridyl) Ruthenium(II) with Hydroxyl Carboxylic Acid

Upon the electrochemical oxidation of tris(2,2′-bipyridyl) ruthenium(II) [Ru(bpy)²⁺₃] and hydroxyl carboxylic acids, for instance, citric acid, tartaric acid, malic acid, and -gluconic acid, bright electrochemiluminescences (ECLs) were observed. Different luminescent reactions were presented depending on the applied potential. The light emission was mainly caused by the reaction between alkoxide radical ion and Ru(bpy)³⁺₃below the potential +1.80 V (vs Ag/AgCl). The luminescence intensity obviously increased because of the more complex reaction process. The luminescence wavelength of 608 nm, which could be found either at higher potential than +1.80 V or in the potential range from +1.30 to +1.80 V, confirmed that ECL was caused by Ru(bpy)²⁺₃*. The factors which affect the determination and HPLC separation of the four acids were also investigated.     

Chiral separation of N-(trans-4-isopropylcyclohexylcarbonyl)-D,L-phenylalanine isomers by high performance liquid chromatography

Summary A high-performance liquid chromatographic method was developed for the chiral separation of a new anti-diabetic agent, N-(trans-4-isopropylcyclohexylcarbonyl)-D-phenylalanine, and its L-enantiomer. The separation was performed on a Sumichiral OA-3300 column. Optimized mobile phase was 0.025 mol.L⁻¹ ammonium acetate in methanol solution. UV detection was at 210 nm. Baseline chiral separation was obtained within 12 minutes. The detection limits are 80 pg for the D-enantiomer and 120 pg for the L-enantiomer. RSD of the method was below 1% (n=5).