Multi-objective optimization of inverse planning for accurate radiotherapy

The multi-objective optimization of inverse planning based on the Pareto solution set, according to the multi-objective character of inverse planning in accurate radiotherapy, was studied in this paper. Firstly,the clinical requirements of a treatment plan were transformed into a multi-objective optimization problem with multiple constraints. Then, the fast and elitist multi-objective Non-dominated Sorting Genetic Algorithm (NSGA-Ⅱ)was introduced to optimize the problem. A clinical example was tested using this method. The results show that an obtained set of non-dominated solutions were uniformly distributed and the corresponding dose distribution of each solution not only approached the expected dose distribution, but also met the dosevolume constraints. It was indicated that the clinical requirements were better satisfied using the method and the planner could select the optimal treatment plan from the non-dominated solution set.     

水基切伦科夫μ子探测器的研究

利用高速带电粒子在透明介质中产生切伦科夫辐射的特性,以蒸馏水作为辐射介质,搭建了一个小尺寸(π×22.52cm2×45 cm)的切伦科夫探测器,对能量在GeV量级的μ子进行了相应的测量,考虑其他能量损耗、光传输和收集效率、阴极量子效率后,实验结果与理论估计值有比较高的相符度,可以初步断定仪器具备探测GeV量级μ子的能力.     

Study on the bubble transport mechanism in an acoustic standing wave field

The use of bubbles in applications such as surface chemistry, drug delivery, and ultrasonic cleaning etc. has been enormously popular in the past two decades. It has been recognized that acoustically-driven bubbles can be used to disturb the flow field near a boundary in order to accelerate physical or chemical reactions on the surface. The interactions between bubbles and a surface have been studied experimentally and analytically. However, most of the investigations focused on violently oscillating bubbles (also known as cavitation bubble), less attention has been given to understand the interactions between moderately oscillating bubbles and a boundary. Moreover, cavitation bubbles were normally generated in situ by a high intensity laser beam, little experimental work has been carried out to study the translational trajectory of a moderately oscillating bubble in an acoustic field and subsequent interactions with the surface. This paper describes the design of an ultrasonic test cell and explores the mechanism of bubble manipulation within the test cell. The test cell consists of a transducer, a liquid medium and a glass backing plate. The acoustic field within the multi-layered stack was designed in such a way that it was effectively one dimensional. This was then successfully simulated by a one dimensional network model. The model can accurately predict the impedance of the test cell as well as the mode shape (distribution of particle velocity and stress/pressure field) within the whole assembly. The mode shape of the stack was designed so that bubbles can be pushed from their injection point onto a backing glass plate. Bubble radial oscillation was simulated by a modified Keller–Miksis equation and bubble translational motion was derived from an equation obtained by applying Newton’s second law to a bubble in a liquid medium. Results indicated that the bubble trajectory depends on the acoustic pressure amplitude and initial bubble size: an increase of pressure amplitude or a decrease of bubble size forces bubbles larger than their resonant size to arrive at the target plate at lower heights, while the trajectories of smaller bubbles are less influenced by these factors. The test cell is also suitable for testing the effects of drag force on the bubble motion and for studying the bubble behavior near a surface.     

不同湍流模型对热等离子体射流模拟的影响

本文应用大气压等离子体射流传热与流动的三维数学模型,在相同初始条件下,计算得到了采用不同湍流模型时氩等离子体射流对称轴线上的温度、速度及空气质量分数分布,并与文献中同等条件下的实验结果进行了比较,结果表明采用标准κ-ε模型和Realizableκ-ε模型时与实验结果相差较大,而采用RNGκ-ε湍流模型时模拟结果与实验数...     

基于互注入半导体激光器的混沌输出产生17.5 Gbit/s随机码

采用两个借助光纤连接的相互注入半导体激光器,实验获取了10 GHz超宽带混沌种子信号.通过8-bit模数转换器将混沌信号转换为二进制数据流,并进行进一步的逻辑异或处理和舍弃最高有效位操作,最终获得了能顺利通过美国国家标准与技术研究院(National Institute of Standard and Technology,简记为NIST)800-22标准测试以及Diehard测试,速率达17.5 Gbit/s的高速随机码. 关键词： 随机码 混沌激光 互注入半导体激光器     

A study of Eu2O3, Sc2O3 co-doped tungsten matrix impregnated cathode

Eu₂O₃ and Sc₂O₃ co-doped W matrix impregnated cathodes have been prepared by the powder metallurgy method. The constitution of active elements on activated cathode surface is analyzed by in-situ Auger electron spectroscopy. It is found that although Eu exists in the matrix, no Eu is found on the cathode surface due to the formation of a stable Eu containing compound. Sc, Ba and O diffuse to the surface of the cathode and form an active surface layer during the activation period whereas the stable Eu-compound cannot liberate free Eu, which can diffuse from the cathode to the surface. The active substance of Sc, Ba and O on the cathode surface contribute to the emission property.     

谷值V~2控制Boost变换器的精确建模与动力学分析

建立了谷值V2控制Boost变换器的离散迭代映射模型,在此基础上得到了输入电压、输出电容及其等效串联电阻(equivalent series resistance,ESR)变化时的分岔图,推导了不动点处的雅可比矩阵,利用特征值和最大Lyapunov指数对系统进行了稳定性分析,并验证了分岔图的正确性.重点研究了输入电压和输出电容及其ESR对谷值V2控制Boost变换器的动力学特性的影响.研究结果表明,输入电压增大时,变换器从周期1态经历1次倍周期分岔和边界碰撞分岔进入混沌状态;输出电容及其ESR具有相同的分岔路由,随着输出电容及其ESR的逐渐减小,变换器具有从周期1态经历周期2态、周期4态、周期8态、逐渐演变到混沌态的动力学行为.最后,用仿真和实验结果验证了本文理论分析的正确性.     

广义线性模型(六)

本讲座是广义线性模型这个题目的一个比较系统的介绍。主要分 3部分 :建模、统计分析与模型选择和诊断。写作时依据的主要参考资料是L .Fahrmeir等人的 :《MultivariateStatisticalModel ingBasedonGeneralizedLinearModles》。     

关于一类平面n+2次系统极限环唯一性的一个注记

本文继续完善文[1]和[2]的工作,利用广义Lienard方程和张芷芬唯一性定 理证明了,当n≥3时一类n+2次生化反应系统极限环的唯一性.至此,该系统极 限环唯一性问题得到完整解决.