(S)-富马酸替诺福韦二吡呋酯的合成

以腺嘌呤为原料,经N-烷基化、O-烷基化、水解、酯化和成盐5步反应合成了(S)-富马酸替诺福韦二吡呋酯,总收率10.0%,其结构经1H NMR和ESI-MS确证。     

钯催化二溴代化合物自偶联环化合成二苯并[a,e]环辛四烯

由于独特的结构和广泛的应用,多取代环辛四烯及其苯并稠环衍生物的合成方法研究具有重要意义.本文报道了一种钯催化烯基溴化物与芳基溴化物的偶联反应.利用此钯催化的环化自偶联反应,以中等至较好的收率高选择性地从双溴代芳基或烯基化合物合成了多种二苯并[a,e]环辛四烯衍生物.     

Co3O4纳米晶催化氧化甲烷的理论研究：C-H键活化的晶面效应及活性中心

甲烷是一种在自然界中大量存在的原材料,在取代原油和合成重要化工产品等许多领域具有潜在的应用价值. 然而,由于CH₄中C-H键的键能特别大（约~4.5 eV）,如何实现甲烷的绿色有效转化在化学化工领域仍然是一个挑战. 本文采用密度泛函理论对Co₃O₄（001）和（011）晶面活化甲烷C-H键的机理进行了理论研究,得到了如下结论：（1） CH₄的C-H键在Co₃O₄晶面的解离具有很高的活性,只需要克服大约1 eV的能垒;（2）与Co^2＋相连的Co-O离子对是CH₄活化的活性位点,其中两个带正负电荷的离子对C-H解离起着协同作用,帮助产生Co-CH₃和O-H物种;（3）（011）面的反应活性明显大于（001）面,与实验的观察一致. 本文的计算结果表明,Co₃O₄纳米晶面对CH₄中C-H键的活化表现出明显的晶面效应和结构敏感效应,Co-O离子对活性中心对于活化惰性的C-H键发挥了关键作用.     

表面修饰多壁碳纳米管负载二氧化钛的制备及催化碳酸二甲酯与苯酚酯交换反应的性能

制备了表面修饰多壁碳纳米管负载TiO₂的催化剂,并将其应用于碳酸二甲酯与苯酚的酯交换反应. 采用X射线电子能谱、透射电子显微镜、低温N₂吸附-脱附和X射线衍射等对催化剂进行了表征. 结果表明,以低浓度的氨水（0.4%）代替去离子水作为沉淀剂时,制备的催化剂显示出更好的催化活性、分离性与重复使用性. 考察了TiO₂负载量、催化剂用量及反应时间对反应性能的影响. 在最佳反应条件下,苯酚转化率为42.5%,碳酸甲苯酯与碳酸二苯酯的总选择性达到99.9%以上. 经过4次重复使用后,催化剂的活性略有下降.     

反相高效液相色谱法同时测定壮阳类保健品中达泊西汀和4种PDE5抑制剂

提出了反相高效液相色谱法同时测定壮阳类保健品中4种PDE5抑制剂和达泊西汀含量的方法。样品溶于水中,再加甲醇提取。分取10μL提取液进样,并用Inertsil ODS-SP色谱柱为分离柱和由(A)三乙胺-乙酸-水(8+4+988)混合液,(B)乙腈和(C)0.02%(φ)磷酸溶液三者按不同比例相混的混合液作流动相进行梯度淋洗和分离。在检测波长290nm处进行测定。他达那非的质量浓度在1.25~25.0mg·L-1范围内与其峰面积呈线性关系,其余4种化合物的质量浓度在5.0~100mg·L-1范围内与其峰面积呈线性关系,方法的检出限(3S/N)在0.05~0.2mg·L-1之间。加标回收率在94.1%~109%之间,测定值的相对标准偏差(n=6)均小于1.0%。     

纯水中有氧条件下Pd/C催化的无配体Suzuki反应简

报道一种在纯水中Pd/C催化的高效Suzuki反应体系,该体系无需除氧,且无外加配体和添加剂,底物普适性广泛,含有亲水或疏水基团的溴代芳烃都能被高效活化. 此外,对部分杂环芳烃与芳基硼酸的偶联反应也有较好的催化效果. 该催化剂可高效循环使用三次,且性能无明显下降.     

纤维二糖与葡萄糖催化转化制备乙二醇(英文)

选用纤维二糖作为探针分子,探索纤维素催化转化制备乙二醇过程的反应路径.分别考察了纤维二糖和葡萄糖在双组分催化剂H2WO4和Ru/C下的催化反应活性.结果表明,乙二醇不仅来自于纤维二糖水解产物葡萄糖的逆羟醛缩合作用,同时也可以来自于纤维二糖的直接逆羟醛缩合过程.而且,纤维二糖的直接逆羟醛缩合作用对糖苷键的水解也有一定的促进作用.比较发现,钨基催化剂作用下纤维二糖的逆羟醛缩合反应活性比葡萄糖要低,因此乙醇醛可以缓慢产生并在Ru/C催化剂上迅速加氢生成乙二醇.使得以纤维二糖作为原料比以葡萄糖作为原料时获得更高的乙二醇收率.     

A three‐dimensional coordination polymer based on the Zn4(μ3‐OH)2 unit: poly[[(μ4‐benzene‐1,4‐dicarboxylato)bis(μ3‐benzene‐1,4‐dicarboxylato)bis(μ3‐hydroxido)bis(1,10‐phenanthroline‐5,6‐dione)tetrazinc] dihydrate]

The title compound, {[Zn₄(C₈H₄O₄)₃(OH)₂(C₁₂H₆N₂O₂)₂]·2H₂O}_n, has been prepared hydrothermally by the reaction of Zn(NO₃)₂·6H₂O with benzene‐1,4‐dicarboxylic acid (H₂bdc) and 1,10‐phenanthroline‐5,6‐dione (pdon) in H₂O. In the crystal structure, a tetranuclear Zn₄(OH)₂ fragment is located on a crystallographic inversion centre which relates two subunits, each containing a [ZnN₂O₄] octahedron and a [ZnO₄] tetrahedron bridged by a μ₃‐OH group. The pdon ligand chelates to zinc through its two N atoms to form part of the [ZnN₂O₄] octahedron. The two crystallographically independent bdc²⁻ ligands are fully deprotonated and adopt μ₃‐κO:κO′:κO′′ and μ₄‐κO:κO′:κO′′:κO′′′ coordination modes, bridging three or four Zn^II cations, respectively, from two Zn₄(OH)₂ units. The Zn₄(OH)₂ fragment connects six neighbouring tetranuclear units through four μ₃‐bdc²⁻ and two μ₄‐bdc²⁻ ligands, forming a three‐dimensional framework with uninodal 6‐connected α‐Po topology, in which the tetranuclear Zn₄(OH)₂ units are considered as 6‐connected nodes and the bdc²⁻ ligands act as linkers. The uncoordinated water molecules are located on opposite sides of the Zn₄(OH)₂ unit and are connected to it through hydrogen‐bonding interactions involving hydroxide and carboxylate groups. The structure is further stabilized by extensive π–π interactions between the pdon and μ₄‐bdc²⁻ ligands.     

Ultrasensitive non-enzymatic glucose sensing at near-neutral pH values via anodic stripping voltammetry using a glassy carbon electrode modified with Pt3Pd nanoparticles and reduced graphene oxide

We describe an anodic stripping voltammetric (ASV) method for glucose sensing that widely expands the typical amperometric i-t response of glucose sensors. The electrode is based on a working electrode consisting of a glassy carbon electrode modified with Pt-Pd nanoparticles (NPs; in an atomic ratio of 3:1) on a reduced graphene oxide (rGO) support. The material was prepared via the spontaneous redox reaction between rGO, PdCl₄ ²⁻ and PtCl₄ ²⁻ without any additional reductant or surfactant. Unlike known Pt-based sensors, the use of Pt₃Pd NPs results in an ultrasensitive ASV approach for sensing glucose even at near-neutral pH values. If operated at a working voltage as low as 0.06 V (vs. SCE), the modified electrode can detect glucose in the 2 nM to 300 μM concentration range. The lowest detectable concentration is 2 nM which is much lower than the LODs obtained with other amperometric i-t type sensing approaches, most of which have LODs at a μM level. The sensor is not interfered by the presence of 0.1 M of NaCl.

We describe an anodic stripping voltammetric method for glucose sensing that widely expands the typical amperometric i-t response of glucose sensors (2 nM to 300 μM). The electrode is based on a glassy carbon electrode modified with Pt-Pd nanoparticles on a reduced graphene oxide (rGO) support.