新型吡唑联吡咯类杂环化合物的合成及杀菌活性

为寻找具有更高生物活性、更环保的新农药杀菌剂,基于杀菌剂氟咯菌腈设计并合成了10个新型吡唑联吡咯类杂环化合物,以吡唑环代替氟咯菌腈上原有的苯环,以期提高其杀菌活性.采用1H NMR,FTIR,单晶X射线衍射、元素分析和熔点测定等测试手段对目标化合物及其中间体的结构进行了表征与确认,并通过挥发法培养得到了6个目标化合物的单晶.还对其中6个化合物进行了生物活性测试,测试结果表明各化合物对水稻纹枯病、黄瓜灰霉病、黄瓜霜霉病均表现出一定的抑菌效果,可作为先导化合物对其结构进行深入的研究,为新农药杀菌剂的开发提供了理论支持.     

Determination of fatty acids in soil samples by gas chromatography with mass spectrometry coupled with headspace solid‐phase microextraction using a homemade sol–gel fiber†

Through the use of a homemade sol–gel‐derived fiber, a headspace solid‐phase microextraction technique coupled to gas chromatography with mass spectrometry was developed for the determination of fatty acids with long, even‐numbered carbon chains (C₁₂–C₂₄) in soil samples. The experimental parameters such as reaction time, temperature, and ionic strength that might affect derivatization, extraction, and desorption were investigated. Under the optimized conditions, the linearity of the method ranged from 0.1 to 100 mg/L with a correlation coefficient >0.997. The limit of detection values based on a signal‐to‐noise ratio of 3:1 were determined with the concentration from 0.39 to 39.4 μg/L. The recoveries of the method for the soil samples were from 91.15 to 108.1%. This developed method using a homemade fiber showed a higher sensitivity than that using a commercial polydimethylsiloxane fiber and was also for the analysis of real soil samples from the Paomaling geological park of China.     

Negative‐pressure‐induced collector for a self‐balance free‐flow electrophoresis device

Uneven flow in free‐flow electrophoresis (FFE) with a gravity‐induced fraction collector caused by air bubbles in outlets and/or imbalance of the surface tension of collecting tubes would result in a poor separation. To solve these issues, this work describes a novel collector for FFE. The collector is composed of a self‐balance unit, multisoft pipe flow controller, fraction collector, and vacuum pump. A negative pressure induced continuous air flow rapidly flowed through the self‐balance unit, taking the background electrolyte and samples into the fraction collector. The developed collector has the following advantages: (i) supplying a stable and harmonious hydrodynamic environment in the separation chamber for FFE separation, (ii) effectively preventing background electrolyte and sample flow‐back at the outlet of the chamber and improving the resolution, (iii) increasing the preparative scale of the separation, and (iv) simplifying the operation. In addition, the cost of the FFE device was reduced without using a multichannel peristaltic pump for sample collection. Finally, comparative FFE experiments on dyes, proteins, and cells were carried out. It is evident that the new developed collector could overcome the problems inherent in the previous gravity‐induced self‐balance collector.     

Identification and analysis of alkaloids in cortex Phellodendron amurense by high‐performance liquid chromatography with electrospray ionization mass spectrometry coupled with photodiode array detection

Alkaloids from Cortex Phellodendron amurense Rupr. were identified to determine the material basis for the bioactivity of this herb. HPLC–ESI‐MS with photodiode array detection coupled to XCharge C₁₈ column was applied to analyze the alkaloids qualitatively and quantitatively. A total of 37 alkaloids were identified and tentatively characterized from the ethanol extract by online ESI‐MSⁿ fragmentation and UV spectral analysis. A total of ten alkaloids, including four novel natural products, were tentatively identified for the first time in P. amurense. The fragmentation pathways for certain compounds were analyzed. The contents of a pair of isomers (columbamine and jatrorrhizine) and four main alkaloids (phellodendrine, magnoflorine, berberine, and palmatine) were simultaneously quantified using the aforementioned method. Results showed that the newly discovered and known components of P. amurense were helpful in determining the material basis for the bioactivity of the herb. The application of the XCharge C₁₈ column is a suitable and practical method for the isolation of alkaloids in plants.     

Ionic liquid-modified magnetic polymeric microspheres as dispersive solid phase extraction adsorbent: a separation strategy applied to the screening of sulfamonomethoxine and sulfachloropyrazine from urine

Ionic liquid-modified magnetic polymeric microspheres (ILMPM) were prepared based on Fe₃O₄ magnetic nanoparticles (MNPs) and ionic liquids (ILs) incorporated into a polymer. The composites were characterized using scanning electron microscopy, Fourier transform infrared analysis, thermogravimetric analysis, X-ray diffraction, and vibrating magnetometer, which indicated that ILMPM had a regularly spherical shape and strong magnetic property. The obtained ILMPM were successfully applied as a special adsorbent of magnetic dispersive solid phase extraction (MDSPE) for the rapid extraction and isolation of sulfamonomethoxine sodium and sulfachloropyrazine sodium in urine. The factors that affected extraction efficiency, such as adsorption conditions, desorption conditions, washing and elution solvents, and pH of the sample solution, were optimized. Under the optimum condition, good linearity in the range of 0.005–2.0 μg g^?1 (r?≥?0.9996) was obtained for the two sulfonamides (SAs); the average recoveries at three spiked levels ranged from 86.9 to 102.1 %, with relative standard deviations of ≤4.3 %. The presented ILMPM-MDSPE method combined the advantages of ILs, MNPs, and MDSPE and therefore could be potentially applied for rapid screening of SAs in urine.     

On the molecular mechanism of ion specific Hofmeister series

Hofmeister series ranks the ability of salt ions in influencing a variety of properties and processes in aqueous solutions.In this review,we reexamine how these ions and some other small molecules affect water structure and thermodynamic properties,such as surface tension and protein backbone solvation.We illustrate the difficulties in interpreting the thermodynamic information based on structural and dynamic arguments.As an alternative,we show that the solvation properties of ions and proteins/small molecules can be used to explain the salt effects on the thermodynamic properties of the solutions.Our analysis shows that the often neglected cation-anion cooperativity plays a very important role in these effects.We also argue that the change of hydrogen donor/acceptor equilibrium by added cosolutes/cosolvents can be used to explain their effects on protein secondary structure denaturation/protection:those increase hydrogen donor concentrations such as urea and salts with strongly solvated cations/weakly hydrated anions tend to dissolve protein backbone acting as secondary structure denaturants,whereas those lack of hydrogen donors but rich in acceptors have the opposite effect.     

Clickable SBA‐15 to Screen Functional Groups for Adsorption of Antibiotics

Pharmaceutical antibiotics, as emerging contaminants, are usually composed of several functional groups that endow them with the ability to interact with adsorbents through different interactions. This makes the preparation of adsorbents tedious and time‐consuming to screen appropriate functionalized materials. Herein, we describe the synthesis of clickable SBA‐15 and demonstrate its feasibility as a screening material for the adsorption of antibiotics based on similar adsorption trends on materials with similar functional groups obtained by a click reaction and cocondensation/grafting methods.     

o‐Fluorination of Aromatic Azides Yields Improved Azido‐Based Fluorescent Probes for Hydrogen Sulfide: Synthesis,Spectra, and Bioimaging

Hydrogen sulfide (H₂S) is an endogenously produced gaseous signaling molecule with multiple biological functions. To visualize the endogenous in situ production of H₂S in real time, new coumarin‐ and boron‐dipyrromethene‐based fluorescent turn‐on probes were developed for fast sensing of H₂S in aqueous buffer and in living cells. Introduction of a fluoro group in the ortho position of the aromatic azide can lead to a greater than twofold increase in the rate of reaction with H₂S. On the basis of o‐fluorinated aromatic azides, fluorescent probes with high sensitivity and selectivity toward H₂S over other biologically relevant species were designed and synthesized. The probes can be used to in situ to visualize exogenous H₂S and D ‐cysteine‐dependent endogenously produced H₂S in living cells, which makes them promising tools for potential applications in H₂S biology.     

Asymmetric Michael Addition/Intramolecular Cyclization Catalyzed by Bifunctional Tertiary Amine–Squaramides: Construction of Chiral 2‐Amino‐4H‐chromene‐3‐Carbonitrile Derivatives

The efficient asymmetric Michael addition/intramolecular cyclization of malononitrile with dienones catalyzed by a chiral bifunctional tertiary amine–squaramide catalyst for the synthesis of chiral 2‐amino‐4H‐chromene‐3‐carbonitrile derivatives was developed. The corresponding products were obtained in good to excellent yields (up to 99 %) with excellent enantioselectivities (up to 98 % ee) for most of the bisarylidenecyclopentanones.     

Comparison of Loading Efficiency between Hyperbranched Polymers and Cross‐Linked Nanogels at Various Branching Densities

The effect of branching point structures and densities is studied between azido‐containing hyperbranched polymers and cross‐linked nanogels on their loading efficiency of alkynyl‐containing dendron molecules. Hyperbranched polymers that contained “T”‐shaped branching linkage from which three chains radiated out and cross‐linked nanogels that contained “X”‐shaped branching linkage with four radiating chains are synthesized in microemulsion using either atom transfer radical polymerization (ATRP) or conventional radical polymerization (RP) technique. Both polymers have similar density of azido groups in the structure and exhibit similar hydrodynamic diameter in latexes before purification. Subsequent copper‐catalyzed azide–alkyne cycloaddition reactions between these polymers and alkynyl‐containing dendrons in various sizes (G1–G3) demonstrate an order of dendron loading efficiencies (i.e., final conversion of alkynyl‐containing dendron) as hyperbranched polymers > nanogels synthesized by ATRP > nanogels synthesized by RP. Decreasing the branching density or using smaller dendron molecules increases the click efficiency of both polymers. When G2 dendrons with a molecular weight of 627 Da are used to click with the hyperbranched polymers composed of 100% inimer, a maximum loading efficiency of G2 in the loaded hyperbranched polymer is 58% of G2 by weight. These results represent the first comparison between hyperbranched polymers and cross‐linked nanogels to explore the effect of branching structures on their loading efficiencies.