Organoruthenaborane Chemistry. X. The SM2-catalysed formation of [ l-(η6-C6Me6)-isocloso-RuB9H9], and some B-phenylamino derivatives. NMR and X-ray diffraction studies

The action of SMe₂ on the ten-vertex nido-ruthenaborane [6-(η⁶-C₆Me₆)RuB₉H_l3] ( 1 ) provides a high-yield route to the unsubstituted isocloso-ruthenaborane [1-(η⁶-C₆Me₆)RuB₉H₉] (2). The benzene analogue [1-(η⁶-C₆Me₆)RuB₉H₉] is prepared similarly. By contrast, reaction of (1) with PhNH₂ gives a variety of B-phenylamino isocloso derivatives, including orange crystals of [1-(η⁶-C₆Me₆)-2-(PhNH)-isocloso-1-RuB 9 H₈] ( 3 ), red-orange [1-(η⁶-C₆Me₆)-2,3-(PhNH)₂-isocloso-1-RuB₉H₇] ( 4 ) and dark-red [1-(η⁶-C₆Me₆)-5,6,7-(PhNH)₃-isocloso-1-RuB₉H₆] ( 5 ). Detailed ¹H and ¹¹B nmr properties of these various compounds are described. The structure of ( 3 ) has been established by a single-crystal X-ray diffraction study of the solvate [1-(η⁶-C₆Me₆)-2-(PhNH)-isocloso-1-RuB₉H₈] · 1/2 CH₂Cl₂; the crystals were monoclinic, space group C2/c, with a = 1895.1(3), b = 1556.6(3), c = 1716.4(3) pm, β = 104.37(1)° and z = 8.     

Time shift correction in second-order liquid chromatographic data with iterative target transformation factor analysis

When the generalized rank annihilation method (GRAM) is applied to liquid chromatographic data with diode-array detection, an important problem is the time shift of the peak of the analyte in the test sample. This problem leads to erroneous predictions. This time shift can be corrected if a time window is selected so that the chromatographic profile of the analyte in the test sample is trilinear with the peak of the analyte in the calibration sample. In this paper we present a new method to determine when this condition is met. This method is based on the curve resolution with iterative target transformation factor analysis (ITTFA). The calibration and test matrices are independently decomposed into profiles and spectra, and aligned before GRAM is applied. Here we study two situations: first, when the calibration matrix has one analyte and second, when it has two analytes. When the calibration matrix has two analytes, we selectively determine the time window for the analyte to be quantified. There were considerably fewer prediction errors after correction.     

NO reburning study based on species quantification obtained by coupling LIF and cavity ring-down spectroscopy

NO reburning is studied in a low pressure (15 hPa) premixed flame of CH4-O2 seeded with 1.8% of NO. Measurements were carried out by using cavity ring-down spectroscopy (CRDS) and laser induced fluorescence (LIF) techniques. The temperature profile was obtained by OH-LIF thermometry in the A-X (0-0) band. The OH profile was determined by LIF and calibrated by single pass absorption. The NO concentration profile was obtained by LIF in the A-X (0-0) band and corrected for Boltzmann fraction and quantum yield variations. The absolute concentration profile was determined in the burned gases by CRDS allowing a direct experimental determination of the NO reburning amount. Finally CH and CN mole fraction profiles were obtained by CRDS by exciting rotational transitions in the B-X (0-0) bands of CH and CN around 387 nm. We found a peak mole fraction of 29 ppm for CH and 3.3 ppm for CN. This last result is in contrast with a previous study of W. Juchmann, H. Latzel, D. L. Shin, G. Peiter, T. Dreier, H. R. Volpp, J. Wolfrum, R. P. Lindstedt and K. M. Leung, XXVIIth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, 1998, p. 469, performed in a similar flame, which reported much lower levels of CN. In that study the absolute concentration of CN was indirectly obtained by LIF calibrated by Rayleigh scattering. In a second part, experimental species profiles are compared with predictions of the GRI 3.0 mechanism. Comparison between experimental and predicted profiles shows a good agreement particularly for CN and NO species. A qualitative analysis of NO reburning is then performed.     

Synthesis and structure of Pt(II) phosphonato-phosphine complexes and of a P,O-stabilized metal-metal-bonded Pt2Ag2 complex

As part of our interest in the design and reactivity of P,O ligands, and because the insertion chemistry of small molecules into a metal alkyl bond is very dependent on the ancillary ligands, the behavior of Pt-methyl complexes containing the beta-phosphonato-phosphine ligand rac-Ph2PCH(Ph)P(O)(OEt)2 (abbreviated PPO in the following) toward CO insertion has been explored. New, mononuclear Pt(II) complexes containing one or two PPO ligands, [PtClMe(kappa2-PPO)] (1), [Pt{C(O)Me}Cl(kappa2-PPO)] (2), [PtMe(CO)(kappa2-PPO)]OTf (3 x OTf), [PtMe(OTf)(kappa2-PPO)] (4), trans-[PtClMe(kappa1-PPO)2] (5), [PtMe(kappa2-PPO)(kappa1-PPO)]BF4 (6 x BF4), [PtMe(kappa2-PPO)(kappa1-PPO)]OTf (6 x OTf), and [Pt{C(O)Me}(kappa2-PPO)(kappa1-PPO)]BF4 (7 x BF4) have been prepared and characterized. Hemilability of the ligands is observed in the cations 6 and 7 in which the terminally bound and chelating PPO ligands exchange their role on the NMR time-scale. The acetyl complexes 2 and 7 are stable in solution, but the former deinserts CO upon chloride abstraction. We also demonstrate the ability of PPO to behave as an assembling ligand and to stabilize a heterometallic Pt-Ag metal complex, [PtMe(kappa2-PPO){mu-(eta1-P;eta1-O)PPO)}Ag(OTf)(Pt-Ag)]OTf (8 x OTf), which was obtained by reaction of 5 with AgOTf to generate more reactive, cationic complexes. Whereas the first equivalent of AgOTf abstracted the chloride ligand, the second equivalent added to the cationic complex with formation of a Pt-Ag bond (2.819(1) A). The complexes 1, 2, 4, 5 x CH2Cl2, and (8 x OTf)2 have been structurally characterized by single-crystal X-ray diffraction. The latter has a dimeric nature in the solid state, with two silver-bound triflates acting as bridging ligands between two Pt-Ag moieties. In addition to the Ag-Pt bond, the Ag+ cation is stabilized by a dative O -->Ag interaction involving one of the PPO ligands.     

Amberlite XAD-2 functionalized with 2-aminothiophenol as a new sorbent for on-line preconcentration of cadmium and copper

A new functionalized resin has been applied in an on-line preconcentration system for copper and cadmium determination. Amberlite XAD-2 was functionalized by coupling it to 2-aminothiophenol (AT-XAD) by means of an NN spacer. This resin was packed in a minicolumn and used as sorbent in the on-line system. Metal ions were sorbed in the minicolumn, from which it could be eluted directly to the nebulizer-burner system of the flame atomic absorption spectrometer (FAAS). Elution of Cd(II) and Cu(II) from minicolumn can be made with 0.50 mol l⁻¹ HCl or HNO₃. The enrichment factors obtained were 28 (Cd) and 14 (Cu), for 60 s preconcentration time, and 74 (Cd) and 35 (Cu), if used 180 s preconcentration time. The proposed procedure allowed the determination of cadmium and copper with detection limits of 0.14 and 0.54 μg l⁻¹, respectively, when used preconcentration periods of 180 s. The effects of foreign ions on the adsorption of these metal ions are reported. The validation of the procedure was carried out by analysis of certified reference material. This procedure was applied to cadmium and copper determination in natural, drink and tap water samples.     

Density functional theory study of vibrational spectra, and assignment of fundamental vibrational modes of succinimide and N-bromosuccinimide

This work deals with the vibrational spectroscopy of succinimide and N-bromosuccinimide. The mid and far FTIR and FT-Raman spectra were measured in the condensed state. The fundamental vibrational frequencies and intensity of vibrational bands were evaluated using density functional theory (DFT) using standard B3LYP/6-31G(*) and B3LYP/6-311+G(**) methods and basis set combinations. The vibrational spectra were interpreted, with the aid of normal coordinate analysis based on a scaled quantum mechanical force field. The infrared and Raman spectra were also predicted from the calculated intensities. Comparison of simulated spectra with the experimental spectra provides important information about the ability of the computational method to describe the vibrational modes. Unambiguous vibrational assignment of all the fundamentals were made using the total energy distribution (TED).     

Limit of detection estimator for second-order bilinear calibration

A new approach is developed for estimating the limit of detection in second-order bilinear calibration with the generalized rank annihilation method (GRAM). The proposed estimator is based on recently derived expressions for prediction variance and bias. It follows the latest IUPAC recommendations in the sense that it concisely accounts for the probabilities of committing both types I and II errors, i.e. false positive and false negative declarations, respectively. The estimator has been extensively validated with simulated data, yielding promising results.     

Two New Antiferromagnetic Nickel(II) Complexes Bridged by Azido Ligands in the Cis Position. Effect of the Counteranion on the Crystal Structure and Magnetic Properties

Two new nickel(II) end-to-end azido-bridged compounds, cis-catena-[NiL(2)(&mgr;-N(3))](n)()(ClO(4))(n)().nH(2)O (1) and [Ni(2)L(4)(&mgr;-N(3))(2)](PF(6))(2) (2), were synthesized and characterized; L is 2-(aminoethyl)pyridine. The crystal structures of 1 and 2 were solved. Complex 1: monoclinic system, space group P2(1)/a, a = 8.637(2) ?, b = 18.9995(7) ?, c = 12.3093(7) ?, beta = 105.92(2) degrees, Z = 4. Complex 2: triclinic system, space group P&onemacr;, a = 9.139(7) ?, b = 10.124(3) ?, c = 12.024(2) ?, alpha = 70.407(14) degrees, beta = 84.19(2) degrees, gamma = 67.67(4) degrees, Z = 1. In the two complexes the nickel atom is situated in a similarly distorted octahedral environment. The two complexes are different; 1 is a one-dimensional helicoidal complex with the two L ligands and the two end-to-end azido bridges in a cis arrangement while complex 2 is a dinuclear system with two end-to-end azido bridges, indicating the extreme importance of the counteranion present (ClO(4)(-) for 1 and PF(6)(-) for 2). The magnetic properties of the two compounds were studied by susceptibility measurements vs temperature. The chi(M) vs T plot for 1 shows the shape for a weakly antiferromagnetically coupled nickel(II) one-dimensional complex without a maximum until 4 K. In contrast, for complex 2 the shape of the chi(M) vs T curve shows a maximum near 40 K, indicating medium antiferromagnetic coupling. From the spin Hamiltonian -J(ij)()S(i)()S(j)(), J values for 1 and 2 were less than -1 and -29.1 cm(-)(1), respectively. The magnetic behavior for 1 and 2 may be explained in terms of the overlap between magnetic orbitals, taking into account the torsion of the Ni(II) atoms and azido-bridging ligands in the two structures.     

Ferrocenoyl peptides with sulfur-containing side chains: synthesis, solid state and solution structures

The synthesis and full characterization of a number of amino acid and dipeptide derivatives with sulfur-containing side chains derived from ferrocene carboxylic acid and ferrocene-1,1′-dicarboxylic acid is presented. In particular, compounds Fc-CO-(Aaa)_n-OMe (4) and Fe[C₅H₄-CO-(Aaa)_n-OMe]₂ (3) with (Aaa)_n = Cys(Bzl) (a), Cys(Bzl)-Cys(Bzl) (b), Cys(p-OMe-Bzl) (c), Cys(p-OMe-Bzl)-Cys(p-OMe-Bzl) (d), Met (e), and Met-Met (f) were prepared. Also, the free acid derivatives Fe[C₅H₄-CO-Met-OH]₂ (6e) and Fc-CO-Met-OH (7e) were prepared and characterized. The solid state structures of 3a, 4b, and 4e were determined by single crystal X-ray diffraction. Compound 3a shows a 1,3′ substitution pattern on the Cp rings in the solid state. Structures in solution were determined by NMR, IR and CD spectroscopy, with particular emphasis on the question of hydrogen bonding and helical chirality of the metallocene. As an example, the full assignment for the Cp signals in the disubstituted derivative 3a was achieved by simulation of the ¹H NMR signals from the cyclopentadienyl ring in combination with 2D-NOESY spectra. In solution, 3a has the known 1,2′ substitution pattern, which is stabilized by intramolecular hydrogen bonds.     

Analysis of sorption and bioavailability of different species of mercury on model soil components using XAS techniques and sensor bacteria

The present work studies the adsorption behaviour of mercury species on different soil components (montmorillonite, kaolinite and humic acid) spiked with CH₃HgCl and CH₃HgOH at different pH values, by using XAS techniques and bacterial mercury sensors in order to evaluate the availability of methyl mercury on soil components. The study details and discusses different aspects of the adsorption process, including sample preparation (with analysis of adsorbed methyl mercury by ICP-OES), the various adsorption conditions, and the characterization of spiked samples by XAS techniques performed at two synchrotron facilities (ESRF in Grenoble, France and HASYLAB in Hamburg, Germany), as well as bioavailability studies using mercury-specific sensor bacteria. Results show that XAS is a valuable qualitative technique that can be used to identify the bonding character of the Hg in mercury environment. The amount of methyl in mercury adsorbed to montmorillonite was pH-dependent while for all soil components studied, the bond character was not affected by pH. On the other hand, clays exhibited more ionic bonding character than humic acids did with methyl mercury. This interaction has a higher covalent character and so it is more stable for CH₃HgOH than for CH₃HgCl, due to the higher reactivity of the hydroxyl group arising from the possible formation of hydrogen bonds.The bioavailability of methyl mercury adsorbed to montmorillonite, kaolinite and humic acids was measured using recombinant luminescent sensor bacterium Escherichia coli MC1061 (pmerBR_BSluc). In case of contact exposure (suspension assays), the results showed that the bioavailability was higher than it was for exposure to particle-free extracts prepared from these suspensions. The highest bioavailability of methyl mercury was found in suspensions of montmorillonite (about 50% of the total amount), while the bioavailabilities of kaolinite and humic acids were five times lower (about 10%). The behaviour of methyl mercury in the presence of montmorillonite could be explained by the more ionic bonding character of this system, in contrast to the more covalent bonding character observed for humic acids. Thus, XAS techniques seem to provide promising tools for investigating the mechanisms behind the observed bioavailabilities of metals in various environmental matrices, an important topic in environmental toxicology.