磁敏智能软材料及磁流变机理

磁敏智能软材料是一类将微米或纳米尺度的磁性颗粒分散在不同基体中制备而成的多功能复合材料.由于其流变性能在外磁场的调控下可以实现连续、快速、可逆的改变,因此在建筑、振动控制和汽车工业等领域得到了广泛地应用.本文首先介绍了磁敏智能软材料发展历史及分类,分析了不同种类的磁敏智能软材料的特点和存在的科学问题;然后从实验和理论两个方面讨论了磁流变机理的研究现状;最后从实际应用的角度对这类材料未来的发展方向进行了展望.      

Thermally induced vibration and stability of laminated composite plates with temperature-dependent properties

This paper presents a study on the buckling and vibration of initially stressed composite plates with temperature-dependent material properties in thermal environments. The initial stress is taken to be a combination of a pure bending stress and an axial stress. The temperature distribution in the plate is assumed to be uniform and linear in the transverse direction. The governing equations including the transverse shear deformation effects are established using the variational method. The effects of various parameters on the buckling and vibration behaviors of laminated plates with respective temperature-dependent and temperature-independent material properties are investigated. The buckling load and natural frequency are sensitive to the thermal stresses and initial stresses. Numerical results reveal that temperature-dependent material properties should be considered in the buckling and vibration analysis for laminated plates under thermal conditions.     

一种增强LED光提取效率的新方法

本文从分析全内反射中的近场倏逝波出发,提出了在近场倏逝波衰减长度内置一金属Ag光栅的LED结构模型,同时基于时域有限差分(FDTD)方法计算了此模型的光谱特性,分析了此LED模型的光提取效率。结果表明置入的金属Ag光栅在特定的波段可以将近场倏逝波耦合为传播波模式辐射出去,从而有效地增强了LED的光提取效率。     

Electrochemical performance of a nonaqueous rechargeable lithium-air battery

Nonaqueous rechargeable lithium-air battery has so high specific capacity and specific energy that it is being widely researched by academia, corporation, and different research institutes. When used in dried air and absorbing oxygen form the air, this battery is called lithium-air battery, and its specific capacity based on cathode active material (oxygen) is infinite. However, its cycle performance is very limited as reported by the state-of-the-art researches. This cycle problem is mainly caused by instability of electrolyte. Based on electroanalysis of materials’ electrochemical property, a stable electrolyte solvent (sulfolane) and a lithium salt LiBF₄ are selected as electrolytes in this work. Coupled with other eligible battery materials and careful assembly, the lithium-air battery exhibits favorable cycle performance. Above all, this lithium-air system is evaluated objectively in this paper.     

瑞奇-康芒两角度检测法的一种波像差解读方法

瑞奇-康芒法是大口径平面元件面形检测的有效方法.通过分析检测光瞳到被检平面的位置转换关系以及波像差到面形误差的幅值转换关系,分别对检测得到的波像差以及干涉仪离焦产生的Power进行转换处理,利用最小二乘法计算出瑞奇-康芒两角度检测时的干涉仪离焦量,从而获得被检平面的面形误差分布.实验部分给出了第4项到第37项泽尼克多项...     

Study on Transient Properties of Levitated Object in Near-FieldAcoustic Levitation

A new approach to the study on the transient properties of the levitated object in near-field acoustic levitation (NFAL) is presented. In this article, the transient response characteristics, including the levitated height of an object with radius of 24 mm and thickness of 5 mm, the radial velocity and pressure difference of gas at the boundary of clearance between the levitated object and radiating surface (squeeze film), is calculated according to several velocity amplitudes of radiating surface. First, the basic equations in fluid areas on Arbitrary Lagrange-Euler (ALE) form are numerically solved by using streamline upwind
petrov galerkin (SUPG) finite elements method. Second, the formed algebraic equations and solid control equations are solved by using synchronous
alternating method to gain the transient messages of the levitated object and gas in the squeeze film. Through theoretical and numerical analyses, it
is found that there is a oscillation time in the transient process and that the response time does not simply increase with the increasing of velocity
amplitudes of radiating surface. More investigations in this paper are helpful for the understanding of the transient properties of levitated
object in NFAL, which are in favor of enhancing stabilities and responsiveness of levitated object.     

聚甲基丙烯酸肉桂酰氧基乙酯的光化学反应在液晶分子排列取向中的作用

研究了光聚合物材料聚甲基丙烯酸肉桂酰氧基乙酯(CEMC)对液晶材料LC-6710A的取向作用,取向层表面在光化学反应前后的变化;测量了光控取向膜液晶盒中液晶分子的预倾角及单面光控取向扭曲向列液晶显示器(TNLCD)的电光特性和时间响应特性,研究了这种材料的光化学反应过程,以及液晶分子排列取向的机理.     

人眼视网膜成像液晶自适应光学系统的优化设计

针对已有的人眼视网膜成像液晶自适应光学系统的不足,提出了新的优化设计方案.新设计的系统能对不同视度下的人眼进行高分辨率成像.新系统还采用了瞳孔监控装置和成像区域快速精确定位装置,并且采用了改进的消杂散光方法,能够使探测准确度和定位准确度得到保证.研究证明,该系统新的设计方案操作方便、灵活,便于推广使用.     

13.56 MHz/2 MHz柱状感性耦合等离子体参数的对比研究

通过Langmuir双探针和发射光谱诊断方法,对比研究了驱动频率为13.56 MHz和2 MHz柱状感性耦合等离子体中电子密度和电子温度的径向分布规律.结果表明:在高频和低频放电中,输入功率的增加对等离子体参数产生了不同的影响,高频放电中主要提升了电子密度,低频放电中则主要提升了电子温度.固定气压为10 Pa,分别由高频和低频驱动时,电子密度的径向分布均为"凸型".而电子温度的分布差异比较明显,高频驱动时,电子温度在腔室中心较为平坦,在边缘略有上升;低频驱动时,电子温度随径向距离的增加而逐渐下降.为了进一步分析造成这种差异的原因,在相同放电条件下采集了氩等离子体的发射光谱图,利用分支比法计算了亚稳态粒子的数密度,发现电子温度的径向分布始终与亚稳态粒子的径向分布相反.继续升高气压到100 Pa,发现不论高频还是低频放电,电子密度的径向分布均从"凸型"转变为"马鞍形",较低气压时电子密度的均匀性有了一定的提升,但低频的均匀性更好.     

超声波辅助稠油层内催化水热裂解实验研究

将超声波应用到稠油催化水热裂解实验中,研究了超声波辅助催化水热裂解对胜利油田孤东稠油物化性质的影响。结果表明,超声波辅助作用下稠油的降黏率达到86.2%,与催化水热裂解相比,稠油的平均相对分子质量进一步减小,饱和烃和芳香烃组分含量增加,胶质和沥青质组分含量减少,稠油组分的氢碳原子比增加,杂原子含量减小。动态模拟实验中超声波辅助层内催化水热裂解效果显著,稠油采收率达到53.91%,降黏率达到80.5%。由此表明,超声波辅助催化水热裂解具有可行性,超声波与催化剂协同作用促进了水热裂解反应,一定程度上改善了稠油的品质。