羟基磺酸、氨基磺酸和磺酰肽的合成

具有四面体结构的磺酸衍生物可用于模拟酯键和酰胺键水解的过渡态，特别是 含有四面体结构磺酰胺键的磺酰肽作为天然肽的硫类似物，广泛用于作为酶抑制剂 以及用来诱导抗体酶的半抗原。综述了羟基磺酸、氨基磺酸和磺酰肽的合成。重点 介绍了消旋的和手性的α－和β－取代的β－氨基磺酸及其酰氯和亚磺酰氯，γ－ 氨基－α，β－不饱和磺酸及其酰氯的合成，以及由它们作为基元分子通过液相和 固相方法来合成α－和β－取代的β－磺酰肽、亚磺酰肽及乙烯磺酰肽。     

O-二异丙氧磷酰基丝氨酸(或苏氨酸或酪氨酸)的合成

介绍一种简单方便地合成O-二异丙氧磷酰基丝氨酸(或苏氨酸或酪氨酸)的方法.其中O-二异丙氧磷酰基-L-丝氨酸(或苏氨酸)可从对应的N-磷酰化-L-丝氨酸(或苏氨酸)利用磷酰基N→0迁移的性质并在超声辅助下合成,而N-二异丙氧磷酰基-L-丝氨酸(或苏氨酸)的合成由L-丝氨酸(或苏氨酸)在次氯酸钠的水溶液中高收率地获得.O-二异丙氧磷酰基酪氨酸的合成可通过铜盐同时保护氨基和羧基,使用二异丙基磷酰氯为磷酰化试剂磷酰化,用硫化氢脱铜保护制备.     

配合物[Cu2(phen)2](SiW12O40)(H2O)7的合成、晶体结构及电化学分析

The title complex has been synthesized by the reaction of silicotungstic acid, 1,10-phenanthroline (phen) monohydrate and cupric acetate. The crystal structure belongs to triclinic system, space group P1 with a=1.158 46(15) nm, b=1.658 8(2) nm, c=1.664 4(2) nm, α=82.090(2)°, β=76.001(2)°, γ=86.531(2)°, and V=3.072 6(7) nm³, D_c=3.887 g·cm^-3, Z=2, F(000)=3 196. R₁=0.086 7, wR₂=0.185 8. The structure shows that the copper(Ⅱ) atom is coordinated with two nitrogen atoms from the one phen and three oxgygen atoms from three water, forming a distorted square-pyramid configuration The cyclic voltametric behavior of the complex is also reported. CCDC: 298807.     

Enantioselective Addition of Phenylacetylene to Aldehydes Catalyzed by Polymer-Supported Sulfonamide

Enantioselective formation of C-C bonds is an area of intense research. Among them, the asymmetric addition of alkynyl reagents to aldehydes is very useful for the synthesis of chiral secondary propargyl alcohols.[1] Recently, many significant homogeneous chiral ligands have been disclosed,[2,3] but very few efficient heterogeneous catalysts have been reported. Herein, we report our research results in the asymmetric addition of phenylacetylene to aldehydes catalyzed by polymer-supported chiral sulfonamide.     

XPS STUDIES ON SURFACE MODIFIED POLY [1-(TRIMETHYLSILYL)-1-PROPYNE] MEMBRANES Ⅱ SURFACE MODIFICATION BY BROMINE VAPOR*

Surface modification of poly [1-(trimethylsilyl)-1-propyne] (PTMSP) membranes bybromine vapor has been studied. It is shown that Br/C atomic ratio at the surfaces increased withthe time of bromination until about 60 min, then it reached a plateau. The results of XPS and IRstudies indicated that the addition of bromine to double bonds and the replacement of H on CH_3 bybromine had taken place so that a new peak at 286.0 eV (C--Br)in C_(1s) spectra and some newbands, e. g. at 1220 and 580cm~(-1) in IR spectra were formed. The fact,t Po_2, permeability ofoxygen, decreased and α_(O_2/N_2), separation factor of oxygen relative to nitrogen, increased withbromination time, shows that surface modification of PTMSP by bromine may be an efficient approach to prepare PTMSP membranes used for practical gas separations.     

四配位硅单体及其共聚物的制备和结构表征

研究了直接从无定形二氧化硅出发, 与乙二醇、氢氧化钾反应, 生成高反应活性的五配位硅钾化合物, 并以此为原料与含活泼氯的3-氯丙烯反应制备出含双键官能团的四配位硅单体. 讨论了合成单体的条件如温度、反应时间、反应物浓度、溶液pH值及溶剂等因素的影响. 然后以该四配位硅单体与甲基丙烯酸甲酯(MMA)在偶氮二异丁腈(AIBN)作引发剂下进行自由基聚合得到支链含硅共聚物. 并借助于红外光谱(IR)、核磁共振(¹³C和¹H, ²⁹Si)、能谱元素分析对合成的单体进行了结构表征; 用红外光谱(IR)、热失重谱(TG)、差示扫描量热谱(DSC)、凝胶渗透色谱法(GPC)等现代测试手段对支链含硅共聚物进行了结构表征及热性能分析. IR表明四配位硅单体在1646 cm^－1处是C＝C的伸缩振动吸收峰, 在共聚物中此峰消失; TG表明共聚物在249.6 ℃才开始失重, 552 ℃有机部分失重完毕; GPC分析表明共聚物的数均分子量为8.7万.     

Quantitative analysis of 23-hydroxybetulinic acid in mouse plasma using electrospray liquid chromatography/mass spectrometry

23-Hydroxybetulinic acid is a newly isolated derivative of betulinic acid. The agent exhibits potential anti-tumor activity and functions in this regard via apoptosis. In support of pharmacokinetic and toxicological evaluations, a new assay based on liquid chromatography/mass spectrometry (LC/MS) was developed for the quantitative analysis of 23-hydroxybetulinic acid. Sample preparation consisted of extraction of the plasma by the addition of methylene chloride followed by centrifugation. Aliquots of the supernatant were analyzed using an isocratic reversed-phase high-performance liquid chromatography (HPLC) system coupled to a negative ion electrospray mass spectrometer. Molecules of 23-hydroxybetulinic acid and the internal standard limonin were detected using selected ion monitoring at m/z 471 and 469, respectively. The limit of detection of 23-hydroxybetulinic acid was 0.05 pg (0.11 fmol) injected on-column (10 pg/mL, 5 microL injection volume), and the limit of quantitation was 10 pg (21.19 fmol, 2 ng/mL, 5 muL injection volume). 23-Hydroxybetulinic acid was stable in plasma samples at -20 degrees C for at least 3 weeks. The intra-day and inter-day coefficients of variation of the assay were 3.0 and 4.8%, respectively. The utility of the assay was demonstrated by measuring 23-hydroxybetulinicacid in mouse plasma following intragastric administration (IG) in vivo. Pharmacokinetic parameters were calculated using the 3P97 pharmacokinetic software package. A two-compartment, first-order model was selected for pharmacokinetic modeling. The result showed that after IG of 200 mg/kg 23-hydroxybetulinic acid, the plasma concentrations reached peaks at 2 h with C(max) of 3.1 microg/mL. The 200 mg/kg 23-hydroxybetulinic acid suspension IG doses were found to have long elimination half-lives of 25.6 h and low bioavailability of 2.3%. No interference was noted due to endogenous substances. These analytical methods should be of value in future studies related to the development and characterization of 23-hydroxybetulinic acid.     

Detection of paracetamol by capillary electrophoresis with chemiluminescence detection

Indirect detection of paracetamol was accomplished using a capillary electrophoresis-chemiluminescence (CE-CL) detection system, which was based on its inhibitory effect on a luminol-potassium hexacyanoferrate(III) (K₃[Fe(CN)₆]) CL reaction. Paracetamol migrated in the separation capillary, where it mixed with luminol included in the running buffer. The separation capillary outlet was inserted into the reaction capillary to reach the detection window. A four-way plexiglass joint held the separation capillary and the reaction capillary in place. K₃[Fe(CN)₆] solution was siphoned into a tee and flowed down to the detection window. CL was observed at the tip of the separation capillary outlet. The CL reaction of K₃[Fe(CN)₆] oxidized luminol was employed to provide the high and constant background. Since paracetamol inhibits the CL reaction, an inverted paracetamol peak can be detected, and the degree of CL suppression is proportional to the paracetamol concentration. Maximum CL signal was observed with an electrophoretic buffer of 30 mM sodium borate (pH 9.4) containing 0.5 mM luminol and an oxidizer solution of 0.8 mM K₃[Fe(CN)₆] in 100 mM NaOH solution. Under the optimal conditions, a linear range from 6.6 × 10⁻¹⁰ to 6.6 × 10⁻⁸ M (r = 0.9999), and a detection limit of 5.6 × 10⁻¹⁰ M (signal-to-noise ratio = 3) for paracetamol were achieved. The relative standard deviation (R.S.D.) of the peak area for 5.0 × 10⁻⁹ M of paracetamol (n = 11) was 2.9%. The applicability of the method for the analysis of pharmaceutical and biological samples was examined.     

三(2-氨基乙基)胺-镉(Ⅱ)-2-甲基咪唑三元配合物的合成、结构与抗微生物活性

The complex [Cd(tren)(meim)](ClO₄)₂ was synthesized and characterized by elemental analysis, IR and X-ray single-crystal diffraction. The compound crystallizes in monoclinic system, space group P2₁/m with a=0.786 8(2) nm, b=0.834 2(2) nm, c=1.496 2(4) nm, M_r=538.64, Z=2, F(000)=542, D_c=1.822 g·cm^-3, T=298(2) K, μ=1.435 mm^-1 and λ=0.071 073 nm. The structure was refined to R=0.045 8 and wR=0.123 1 for 1 489 observed reflections with I>2σ(I). The complex was valued for its antimicrobial activity against bacterial strands using the agar diffusion method. It was found to be active against the four test bacterial organisms. CCDC: 600198.     

Hydrogen adsorption on functionalized nanoporous activated carbons

There is considerable interest in hydrogen adsorption on carbon nanotubes and porous carbons as a method of storage for transport and related energy applications. This investigation has involved a systematic investigation of the role of functional groups and porous structure characteristics in determining the hydrogen adsorption characteristics of porous carbons. Suites of carbons were prepared with a wide range of nitrogen and oxygen contents and types of functional groups to investigate their effect on hydrogen adsorption. The porous structures of the carbons were characterized by nitrogen (77 K) and carbon dioxide (273 K) adsorption methods. Hydrogen adsorption isotherms were studied at 77 K and pressure up to 100 kPa. All the isotherms were Type I in the IUPAC classification scheme. Hydrogen isobars indicated that the adsorption of hydrogen is very temperature dependent with little or no hydrogen adsorption above 195 K. The isosteric enthalpies of adsorption at zero surface coverage were obtained using a virial equation, while the values at various surface coverages were obtained from the van't Hoff isochore. The values were in the range 3.9-5.2 kJ mol(-1) for the carbons studied. The thermodynamics of the adsorption process are discussed in relation to temperature limitations for hydrogen storage applications. The maximum amounts of hydrogen adsorbed correlated with the micropore volume obtained from extrapolation of the Dubinin-Radushkevich equation for carbon dioxide adsorption. Functional groups have a small detrimental effect on hydrogen adsorption, and this is related to decreased adsorbate-adsorbent and increased adsorbate-adsorbate interactions.