PSt-g-PEO两亲接枝共聚物溶液的性质

两亲共聚物是指分子结构中同时具有对两种相结构都有亲和性的聚合物,一般指分子结构中同时含有亲油和亲水基团的共聚物,研究两亲共聚物在选择性溶剂中的形态及聚集态结构,对于其作为表面活性剂,增溶剂,生物医药材料,以及固体微胶束的研究都具有重要的理论和实际意义。[1-3]／     

吸附钌吡啶类配合物染料分子对氧化多孔硅光致 发光性质的影响

化学氧化多孔硅经cis-Ru(bpy)~2(CN)~2的乙醇溶液浸泡后,发光峰位红移,强度减弱,激发态寿命缩短。而在trans-Ru(py)~4(CN)~2溶液中浸泡的氧化多孔硅的发光峰位,强度和寿命几乎没有变化。对比两个染料分子的氧化还原电位和光吸收性质得出：与trans-Ru(py)~4(CN)~2相比,cis-Ru(bpy)~2(CN)~2有一个与多孔硅发光能量接近的低能级吸收带,使得多孔硅纳米粒子向该染料分子传递能量成为可能,能量传递的发生引起了发光峰位的红移和激发态寿命的缩短,虽然伴随着发光效率的损耗,但对有目的地选择染料分子来改变多孔硅的发光峰位和获得激发态寿命尽可能小的多孔硅提供了思路,也为深入理解多孔硅的光致发光机制提供了更多的实验事实。     

Ce1—xM′xCa0.2O1.8—0.4x（M=Y,La和Gd）的水热合成及离子导电性质研究

采用水热法合成了系列双掺杂的萤石结构Ce1-xLnxCa0.2O1.8-0.4x固溶体,并研究了3种稀土离子对固溶体导电性的影响,发现掺杂离子半径接近Ce^4 时,体系电导率增大而活化能降低,同时发现水热合成的Ce1-xLnxCa0.2O1.8-0.4x样品的平均粒度按着掺入离子Y^3 ,Gd^3 ,La^3 的顺序逐渐减小,分别为32,20和15nm,这种变化是由于Y^3 半径比La^3 和G ^3 更接近Ce^4 ,因而在水热合成过程中, 掺Y^3 的体系更有利于晶粒的生长,得到的晶体粒度较大。     

含有不同配位阳离子的四帽Keggin结构砷钼钒酸盐[Co(en)_3][Co(en)_2(H_2O)_2]_2·[Mo_4~ⅤMo_4~ⅥV_8~ⅣO_(40)(AsO_4)]的合成与结构

多金属氧酸盐在催化、医药和材料等方面的应用越来越成为无机化学研究的热点 [1～ 5] .水热合成技术在合成多核金属氧酸盐中有独特的优点 .在众多的钼钒酸盐中 ,只有几种双帽及四帽 Keggin结构被合成出来 [6～ 13 ] .本文报道一种含有不同配位阳离子的四帽 Keggin结构砷钼钒酸盐 [Co(en) 3 ]·[Co(en) 2 (H2 O) 2 ]2 · [Mo 4 Mo 4 V 8O4 0 (As O4 ) ]的合成与结构 .该化合物的结构是由不同的阳离子1个 [Co(en) 3 ]3 + 和 2个 [Co(en) 2 (H2 O) 2 ]2 + 及簇阴离子 [Mo 4 Mo 4 V 8O4 0 (As O4 ) ]5- 构成的 .[Mo8V8O4 0 (As O4 ) …     

多检测GPC/SEC技术在高分子表征中的应用—聚(α-甲基苯乙烯-异戊二烯)二嵌段共聚物的溶液性质

采用体积排斥色谱法 (SEC) /示差折光指数 (RI) /直角激光光散射 (RALLS) /示差粘度 (DV )三检测联用技术 ,在THF为溶剂、2 5℃的条件下表征了聚 (α 甲基苯乙烯 异戊二烯 ) (PαMS PI)二嵌段共聚物 ;计算得到了PαMS PI分子的无扰尺寸A为 0 .0 778nm·mol1/ 2 ·g-1/ 2 ;根据PαMS PI与PS分子的无扰尺寸A ,比较了两者在 2 5℃、THF溶剂体系中的链柔性程度 ,证明在此体系中PαMS PI与PS的链柔性程度相当 ;验证了PαMS PI符合普适标定规律     

New diterpenoid glucosides from Siegesbeckia pubescens

Plants of the genus Siegesbeckia are annual herbs widely distributed in tropical and temperate zones and they are used as a traditional medicine to treat rheumatic arthritis, hypertension, malaria, neurasthenia and snake-bite in China. In previous papers, we reported on five new ent-kaurane and ent-pimarane diterpenoids, siegesbeckioside, siegesbeckiol and siegesbeckic acid1, orientalin A and B, and eight know compounds2,3. The present paper describes the isolation and structural elucidation …     

Easily Separated and Recyclable Amino-functionalized PorousSiO2 Beads with 3D Continuous Meso/Macropore Channels

Amino-functionalized porous SiO₂ beads with a diameter of 200—800 μm(PSB-NH₂) have been successfully synthesized by grafting 3-aminopropyl-triethoxysilane onto meso/macroporous silica beads(PSB), in which the PSB was prepared by hydrothermal synthetic method with a porous hard template anion-exchange resin. The as-prepared materials were characterized by means of nitrogen sorption and transmission electron micrographs(TEM), showing the presence of 3D interconnected and continuous large mesopores and macropores inside. The beads were used to catalyze Knoevenagel condensation and proved to be highly active and selective due to the high accessibility of the reactants to the amino groups via the continuous 3D meso/macopores. Notably, such material in bead format facilitates the extremely straightforward separation from reaction solution without any centrifugation or filtration. Moreover, PSB-NH₂ proved to be a stable catalyst via leaching experiment test, and can be easily recovered and reused without significant loss of activity in successive catalytic cycles.     

Quantitative Determination of Urine Glucose: Combination of Laminar Flow in Microfluidic Chip with SERS Probe Technique

A surface-enhanced Raman scattering(SERS) sensing approach for urine glucose was developed based on the laminar flow technology in a cross-type microfluidic chip with SERS probes, 4-mercaptophenylboronic acid (MPBA) functionalized Ag nanoparticles. MPBA as the glucose receptor can identify and bind up with glucose at a molar ratio of 2:1, which can cause the aggregation of SERS probes at a certain position of the chip channel and further enhance the SERS signal of MPBA significantly. Thus, the quantitative SERS detection of glucose was achieved indirectly. No sample pretreatment and separation were needed in this method since the SERS detection was achieved in the gradient diffusion and molecular recognition processes between urine glucose and SERS probe in the laminar flow, which simplified the sample treatment procedures, saved detection time and made it feasible for clinic applications. This method shows a good linear relationship within human body's normal physiological range and has high sensitivity and selectivity. The lowest detection concentration can reach 1.0 mg/dL.     

超高效液相色谱-串联质谱法检测蔬菜中除虫菊素残留

建立了蔬菜中除虫菊素的超高效液相色谱-串联质谱(UPLC-MS/MS)快速检测技术。采用乙腈提取,盐析后无需净化,直接进样分析,正离子多反应监测(MRM)模式测定。结果表明,6种除虫菊素的线性关系良好,相关系数为0.999 5~0.999 9,在0.05、0.1、0.5 mg/kg 3个加标水平下,6种物质的平均回收率为73.9%~109.3%,相对标准偏差(RSDs)为0.4%~7.7%;除虫菊素Ⅰ、除虫菊素Ⅱ的定量下限为0.01mg/kg,瓜叶菊素Ⅰ、瓜叶菊素Ⅱ、茉酮菊素Ⅰ和茉酮菊素Ⅱ的定量下限为0.05 mg/kg,定量下限均指除虫菊素总量。结果表明该方法简便、快速、灵敏度高,适用于蔬菜中除虫菊素的快速检测分析。     

丝素纤维/硫酸钙抗感染骨材料的制备及性能

通过控制丝素蛋白自组装过程制备了溶液状态下的丝素纳米纤维(silk fibroin nanofibers,SFFs),与硫酸钙、万古霉素(vancomycin,VCM)复合,制备了VCM/CS/SFFs抗菌骨材料。通过SEM、XRD、紫外分光光度计、万能力学试验机、抑菌圈、MTT等手段分别研究了复合材料的微观形貌与结构、药物释放、力学、抑菌及细胞相容性等性能。结果显示,与水作为固化液相比,随着SFFs溶液(0.017 5~2.1 mg·m L~(-1))的加入,复合材料凝固时间可控,降解率逐渐降低,抗水性增强,韧性提高;同时随丝素纳米纤维含量的增加骨材料抗压强度表现为先增加后减小的趋势,一周内药物释放速率降低;材料同时具有抑菌作用;MTT实验结果显示,加入丝素纳米纤维后与纯的硫酸钙相比MC3T3细胞增殖明显。