Electrospinning Fabrication of SrTiO3 Nanofibers and Their Photocatalytic Activity

Russian Journal of Physical Chemistry A - SrTiO3 nanofibers were fabricated by an electrospinning process. The phase, microstructure and photocatalytic activity of the obtained SrTiO3 nanofibers...     

A Luminescent Metal–Organic Framework Thermometer with Intrinsic Dual Emission from Organic Lumophores

A new mixed‐ligand metal–organic framework (MOF), ZnATZ‐BTB, has been constructed as a luminescent ratiometric thermometer by making use of the intrinsic dual emission at cryogenic temperatures. Its twofold interpenetrated network promotes the Dexter energy transfer (DET) between the mixed organic lumophores. The temperature‐dependent luminescent behavior arises from the thermal equilibrium between two separated excited states coupled by DET, which is confirmed by Boltzmann distribution fitting. The small excited‐state energy gap allows ZnATZ‐BTB to measure and visualize cryogenic temperatures (30–130 K) with significantly high relative sensitivity (up to 5.29 % K^?1 at 30 K). Moreover, it is the first example of a ratiometric MOF thermometer the dual emitting sources of which are widely applicable mixed organic ligands, opening up new opportunities for designing such devices.     

利用手持技术探究加热过程中石棉网上表面的温度

利用手持技术实时精确测量加热中石棉网上表面不同位置的温度，采用独立样本t检验比较石棉网上表面无铁丝点和有铁丝点间的温度差异与温差差异，通过回归分析探究石棉网上表面温度与其主要影响因素间的关系。研究表明：同等条件下加热中的石棉网上表面无铁丝点与有铁丝点存在显著温度差异，而无铁丝点间的单位距离温差与有铁丝点间的单位距离温差无显著差异；石棉网升温阶段上表面温度与时间、位置的关系可拟合为二元一次线性方程，恒温阶段上表面温度与位置的关系可拟合为一元三次曲线方程；石棉网上表面温度从中心向边缘小幅递减，均匀分布，最大温差小于玻璃仪器的耐热骤变温差。研究结果为化学教育实践中科学使用石棉网以及化学实验教材的编写提供参考依据。     

基于B样条的TERS形貌成像背景扣除方法

在针尖增强拉曼光谱(TERS)形貌成像过程中，由于针尖与扫描台无法绝对平行、样品电子密度骤变处针尖快速升降以及扫描控制系统响应时间特性差等综合原因的影响，往往使形貌图中带有倾斜或边界面卷曲的成像背景。成像背景对样品形貌的识别和分析带来十分不利的影响，而背景扣除就是解决该问题的重要手段，也是形貌成像预处理的重要组成部分。背景扣除的原理一般是通过拟合背景的方法来扣除成像中的背景。传统的背景扣除方法是利用多项式拟合的方法对成像进行逐行的基线校正，但是该方法在处理形貌成像时常常会由于过拟合而造成样品形貌的失真，同时容易在图片上留下明显的线条纹理。针对传统方法的缺点，本文提出采用B样条曲面拟合方法，直接对样品形貌图进行曲面背景拟合，发挥B样条低阶光滑的优点，能够有效克服传统方法的缺陷。在实验中，同时利用传统方法和该方法对金单晶和合成金片的形貌图进行背景扣除，实验结果表明，两种方法都能够扣除样品形貌图中的成像背景，但与传统方法相比，所提出的方法不会造成样品形貌的失真，且不会留下线条纹理，获得了更加良好的背景扣除效果，为进一步分析样品形貌特征提供了更准确可靠的信息，是一种更加有效的TERS形貌成像背景扣除算法。     

功率对氘代辉光放电聚合物结构和力学性能的影响

采用射频辉光放电聚合技术,在低压等离子体聚合装置上开展在5~20 W功率下氘代辉光放电聚合物薄膜的制备及性能研究。利用傅里叶变换红外吸收光谱仪表征薄膜的化学结构,讨论了功率变化对其官能团结构的影响规律。利用元素分析仪和纳米压痕仪表征薄膜中氘原子的相对含量和薄膜的力学性能。研究表明:随着功率的升高,薄膜中的氘含量先升高后降低,在10W时达到最大,薄膜中SP3 CD的相对含量增加,SP3 CD2的相对含量减小;聚合物薄膜的硬度和杨氏模量均随功率的增加而减小。     

The first chlorogenic acid ester saponin from <Emphasis Type="Italic">Lonicera macranthoides</Emphasis>

An original triterpenoid saponin, named lonimacranthoide I, was isolated from the flower buds of Lonicera macranthoides (Caprifoliaceae). It has hederagenin as aglycone. Lonimacranthoide I is a rare chlorogenic acid ester acylated at C-23 of hederagenin. The structure of the saponin was established based on chemical and spectral methods.     

Immobilized palladium on surface-modified Fe3O4/SiO2 nanoparticles: as a magnetically separable and stable recyclable high-performance catalyst for Suzuki and Heck cross-coupling reactions

A palladium-based catalyst (Fe₃O₄/SiO₂/HPG–OPPh₂–PNP) supported on chlorodiphenylphosphine-functionalized magnetic nanoparticles was successfully prepared from Fe₃O₄/SiO₂ with sequential attachment of glycerol and chlorodiphenylphosphine, followed by treatment of an ethanolic solution of palladium chloride with hydrazine. The as-prepared catalyst was characterized by ICP-AES, FTIR, XRD, SEM, and TEM. The Fe₃O₄/SiO₂/HPG–OPPh₂–PNP was found as a magnetically separable and highly active catalyst for Suzuki coupling reactions of aryl iodides, bromides, and chlorides as well as Heck reactions of aryl iodides and bromides. Under appropriate conditions, all reactions afforded the desired products in moderate to excellent yields. Moreover, this catalyst can be easily recovered by using a magnetic field and directly reused for at least six cycles without significant loss of its activity.     

Adaptive controller design for a switched model of air-breathing hypersonic vehicles

Since most of the control strategies for air-breathing hypersonic vehicles (AHVs) concentrate on the control-oriented models built at/around a specific working point, it is somewhat hard to extend them to the broader flight envelop. Aiming at the above deficiency, this paper formulates the dynamics of AHVs as several sub-models, which switch to each other in accordance with the flight condition and make up of the control-oriented switched model (COSM). With the aid of the COSM, two adaptive tracking controllers are proposed for the purposes of velocity tracking and altitude tracking, sequentially. By utilizing neural networks and designing robust control laws, the possible changes on the force and moment coefficients in the COSM are successfully handled. The time-varying inertia parameters of AHVs are also considered at design level. It is worth emphasizing that while this strategy is developed based on a switched model, the resulting control algorithm is continuous with no connection to the switching signal. Analysis indicates that both velocity and altitude tracking errors remain small within the whole flight envelop, which is further confirmed by a simulation study.     

Extinction Effects of Multiplicative Non-Gaussian L′evy Noise in a Tumor Growth System with Immunization

The extinction phenomenon induced by multiplicative non-Gaussian Levy noise in a tumor growth model with immune response is discussed. Under the influence of the stochastic immune rate, the model is analyzed in terms of a stochastic differential equation with multiplicative noise. By means of the theory of the infinitesimal generator of Hunt processes, the escape probability, which is used to measure the noise-induced extinction probability of tumor cells, is explicitly expressed as a function of initial tumor cell density, stability index and noise intensity. Based on the numerical calculations, it is found that for different initial densities of tumor cells, noise parameters play opposite roles on the escape probability. The optimally selected values of the multiplicative noise intensity and the stability index are found to maximize the escape probability.