Design of undercuts and dipole stabilizer rods for the CPHS RFQ accelerator

As part of the design and machining of the RFQ accelerator in the Compact Pulsed Hadron Source (CPHS) project at Tsinghua University, the design process of the undercuts and dipole stabilizer rods is presented in this paper. In particular, the relationship between the inter-vane voltage slope and the local frequency of the undercut section is described quantitatively. With the identification of modes existing in the cavity, the specific parameters are optimized by the SUPERFISH and MAFIA codes. In addition, the water-cooling requirement of the dipole stabilizer rods is briefly discussed.     

脉冲激光二极管泵浦调Q激光器泵浦时间特性研究

从调Q激光器的速率方程出发,对脉冲激光二极管泵浦的调Q激光器在不同泵浦功率及不同透过率情况下的最佳泵浦时间进行了理论分析。计算结果表明,在透过率为20%,腔内损耗为0.05的条件下,1—3倍阈值泵浦功率时,最高效率对应的最佳泵浦时间为1—1.5倍Nd∶YAG荧光寿命;7倍阈值泵浦功率及以上时,最佳泵浦时间约为荧光寿命的一半或者更短。在脉冲泵浦能量相同时,采用较短的泵浦时间(即泵浦功率较高),调Q输出的能量转换效率较高。     

Sigma Meson Production in Nuclear Reactions

The sigma meson production in p ＋ ^12C and p A- ^40Ca reactions at the incident energy Ep = 1.5 GeV is investigated within the Quantum Molecular Dynamics model. The simulation results indicate a distinctive A dependence of the sigma production, that is, the increase of A is followed by an increase of the production cross sections. We find that the σ meson production in proton-induced reactions is strongly medium-dependent, and the produced σ mesons decaying in a denser medium experience a stronger mass shift towards lower masses. This mass shift is an experimentally accessible observable in the final state pion pairs, which do not suffer from reabsorption by the surrounding nucleons. It is pointed out that the ratio of measured sigma cross sections as a function of the sigma invariant-mass from various reactions is a good probe to explore the existence of the σ meson in a dense nuclear environment.     

反铁电相变陶瓷低频发射换能器

在具有高阶形式的广义压电方程基础上,讨论掺镧改性锆锡钛酸铅PbLa(Zr,Sn,Ti)O3(PLZST)反铁电相变陶瓷的非线性机电耦合问题,得到类似传统线性压电方程的近似线性电致伸缩方程,给出了一种解决非线性反铁电相变陶瓷换能器电声转换问题的分析方法,即在直流偏置状态下对PLZST反铁电相变陶瓷的材料参数进行近似线性等效化处理进而分析换能器的电声转换问题.在此基础上,研制了水中谐振频率1.1 kHz新型反铁电相变陶瓷低频弯张换能器.湖上试验结果表明,与同结构同尺寸压电陶瓷弯张换能器相比,目前反铁电换能器样品的发射电压响应约高3dB,声源级高出9dB,并验证了本文所提出的分析非线性反铁电相变陶瓷换能器方法的正确性.     

Lepton-number-violating decays of singly-charged Higgs bosons in the type-（Ⅰ＋Ⅱ ） seesaw model

The lepton-number-violating decays of singly-charged Higgs bosons H^± are investigated in the minimal type-（ Ⅰ＋Ⅱ ） seesaw model with one SU（2）L Higgs triplet △ and one heavy Majorana neutrino N1 at the TeV scale. We find that the branching ratios B（H^＋ → 1α^＋υ^-） （for α = e,μ,τ） depend not only on the mass and mixing parameters of three light neutrinos υi （for i = 1, 2, 3） but also on those of N1. Assuming that the mass of N1 lies in the range of 200 GeV to 1 TeV, we figure out the generous interference bands for the contributions of υi and N1 to B（H^＋→ 1α^＋υ^-）. We illustrate some salient features of such interference effects by considering three typical mass patterns of υi, and show that the relevant Majorana CP-violating phases can affect the magnitudes of B（H^＋→ 1α^＋υ^-）） in this parameter region.     

1.3 GHz单cell超导射频腔等离子体清洗放电研究(英文)

场致发射限制超导射频腔加速梯度增长。为了减少超导射频腔场致发射,在室温条件下,设计搭建了1.3GHz单cell超导射频腔等离子体清洗实验装置,开展等离子体清洗放电研究。使用CST软件模拟腔中的电磁场分布并且优化外部品质因数得到合适的放电条件。随着压强、前向功率和含氧量的变化,实验探讨了Ar/Ar-O₂放电的物理特征和电子激发温度的变化趋势。残余气体分析结果表明,Ar/O₂等离子体清洗能够消除腔体内表面的碳化物。Field emission limits the accelerating gradient increase in SRF cavities. In order to reduce field emission of SRF cavities, the plasma processing experimental setup of a 1.3 GHz single-cell SRF cavity is designed and built to carry out plasma processing discharge research at room temperature. The electromagnetic field distribution is simulated and the external quality factor is optimized to provide a suitable discharge condition using CST software. It is explored that the physical property of Ar/Ar-O₂ discharge and the variation trend of electron excitation temperature with the changes of pressure, forward power and O₂ content in experiment. The result of residual gas analysis indicates that Ar/O₂ plasma processing can eliminate the carbide of the inner surface of cavity.     

温压炸药爆炸瞬态多光谱真温高温计的研究

温压炸药爆炸温度高且具有较强的破坏力,因而使其爆炸温度测试较为困难。为有效评估温压炸药的热温度毁伤效力,将多光谱温度测量系统应用到温压炸药瞬态高温测试中,利用二次测量法计算出爆炸火焰的发射率与真温。在数据采集系统中结合光纤线传感技术,在确保参试人员的安全前提下,可在500 m外测试仪器状态进行数据采集,实现了测量数据信息的远距离传递。测试结果表明,所设计的测量系统工作稳定、安全性高,具有良好的应用前景。     

中能重离子碰撞中的同位旋分馏过程

利用同位旋相关的量子分子动力学模型研究了中能重离子碰撞中同位旋分馏过程.研究结果表明自由粒子中质比与碎片中质比的比值即同位旋分馏强度灵敏地依赖于对称势,而对同位旋相关核子–核子碰撞截面的依赖很弱.同位旋分馏对对称势的灵敏主要来自于气相部分,而液相部分对对称势不够灵敏.气相部分灵敏地依赖于对称势是直接造成同位旋分馏强度对对称势灵敏的主要原因.同时还讨论了各种液相部分的取法,其结果表明不同取法对以上结论的影响不大.因此理论结果与实验数据可以直接比较从而提取对称势的知识.并对引发同位旋分馏的动力学的起因进行了分析和讨论.     

火焰原子吸收光谱法测定固体废弃物磷石膏中微量铜和铅

利用浓硝酸和浓盐酸消解磷石膏固体样品，选择了这两种酸的最佳用最，建立一种磷石膏样品处理方法。研究了应用火焰原子吸收光谱法直接吸取含盐量高的样品溶液，测定其中CU和pb的可行性。一份样品进行7次测定，结果表明，CU和Pb的RSD分别为2．6％和2．0％，加标回收率分别为92.88％一105．04％和91．20％－103．60％。     

模拟纳米晶体原子分布及X射线散射理论图案

通过分子动力学方法模拟纳米晶体（1—3nm）的结构．利用模拟的结果，进行了X射线衍射及径向分布函数的模拟计算．结果表明：纳米晶体晶界呈短程有序，界面原子间距分布很宽；随着晶粒尺寸的减小，晶粒的畸变越大，原子体积常数也明显增大 关键词：