交联壳聚糖在痕量钨(Ⅵ)分析中的应用

提出了用交联壳聚糖（CCTS）预富集、分光光度法测定痕量钨的新方法。研究了CCTS对钨（Ⅵ）的吸附行为，结果表明：在pH=4.5的条件下，交联壳聚糖对钨（Ⅵ）的吸附率最大，可达96％。考察了吸附时间、吸附剂用量、样品体积以及共存元素对吸附率的影响，探讨了吸附机理。方法的检出限（3σ）为0．65μg/L，相对标准偏差（RSD）小于0．75％（n=6),富集倍数为20倍。用于温泉水和海水中痕量钨的测定，结果满意。     

Synthesis and Catalytic Application of Homo-bimetallic Metallocene Complexes as Ethylene Polymerization Catalysts

ＩｎｔｒｏｄｕｃｔｉｏｎＩｔｉｓｗｅｌｌｋｎｏｗｎｔｈａｔｍｅｔａｌｌｏｃｅｎｅｓａｃｔｉｖａｔｅｄｗｉｔｈｍｅｔｈｙｌａｌｕｍｉｎｏｘａｎｅ (ＭＡＯ)ａｒｅｈｉｇｈｌｙａｃｔｉｖｅｈｏｍｏｇｅｎｅｏｕｓＺｉｅｇｌｅｒ Ｎａｔｔａｃａｔａｌｙｓｔｓｔｈａｔｐｒｏｄｕｃｅｐｏｌｙｏｌｅｆｉｎｗｉｔｈｃｏｎ ｔｒｏｌｌｅｄｓｔｅｒｅｏｒｅｇｕｌａｒｉｔｙａｎｄｎａｒｒｏｗｍｏｌｅｃｕｌａｒｗｅｉｇｈｔｄｉｓｔｒｉ ｂｕｔｉｏｎ ,1 4 ｈｏｗｅｖｅｒ,ｔｈｅｍｏｌｅｃｕｌａｒｗｅｉｇｈｔｏｆｔｈｅｐｏｌｙｍ…     

Charge-discharge Behavior of Surface-coated LiMn2O3.95F0.05 Cathode Materials at High Temperature

With inorganic salts such as LiNO3, Li2CO3, surface-coated LiMn2O3.95F0.05 were prepared by melt-impregnation method. When these surface-coated LiMn2O3.95F0.05 were used as cathode materials, their charge-discharge characters were carefully compared. As a result, they exhibited good charge-discharge properties at 50℃ high temperature. Especially, LiNO3 surface-coated LiMn2O3.9F50.05 retained nearly 80% initial reversible capacity after 130 cycles at 50℃.     

燃料电池质子交换膜用新型磺化聚芳醚酮的合成和性能表征

报道了一种新型磺化聚芳醚酮材料的合成方法, 通过引入取代基对聚芳醚主链进行保护，用氯磺酸直接磺化方法在聚芳醚酮高分子侧基上引入磺酸功能基, 实现了聚合物磺化结构的可控定位合成, 得到了稳定性较好的磺化聚芳醚酮. 通过核磁共振(NMR)、 热重(TG)和凝胶渗透色谱(GPC)等分析方法对其结构及性能进行了表征. 用溶液浇膜法制备了质子交换膜, 考察了膜的各种性能, 并与商用Nafion膜进行了比较, 其导电性、 热稳定性和吸水性远优于Nafion膜, 抗氧化性、抗水解性和机械强度也达到了较高的指标.     

胞嘧啶水溶液体系辐解的瞬态产物研究

Using the ns pulse radolysis, we studied the characteristic absorption spectrum and kinetic decay of cytosine anion radical (Cyt-). Results showed that the characteristic absorption of Cyt- was located at λ=355±5 nm, and decayed following the first order kinetics with τ1/2=265 ns at pH=7.0. The decay became slower and τ1/2 rapidly rised with the increment of pH value, Cyt- protonated at C6 in acidic solution, and the characteristic absorption was located at λ=310±5 nm, and decayed following the second order kinetics: Cyt- protonated at N3 in aqueous solution of pH≥7, and the characteristic absorption was located at λ=295±5 nm, and decayed following the second order kinetics.     

聚碳硅烷的高温高压生成机理研究

分别以聚二甲基硅烷(PDMS)、液态聚硅烷(LPS)及PDMS裂解剩余物(LPCS)为原料,在不同的温度下高压合成聚碳硅烷(PCS),采用红外、紫外、核磁共振、分子量及其分布等分析PCS的组成、结构随温度的变化.同时,采用改变减压蒸馏温度的办法,对PCS进行分级,收集在不同蒸馏温度下的馏分,通过对一系列馏分进行了IR分析,以此推测PCS的转化过程.研究表明,PCS的生成过程是随着温度的升高,PDMS、LPS中键能较低的Si—Si键断裂,逐渐转变成为键能较高的Si—C键,转化为低分子的碳硅烷;随着温度的升高,碳硅烷分子间发生脱氢、脱甲烷缩合反应使产物的分子量逐渐长大,生成PCS.     

A New Anthraquinone from Clinopodium polycephalum Glyceroyl-1,6,8-trihydroxy-3-methyl-9,10-dioxo-2-anthracene Carboxylate

ClnOPodiumpoIycePhalum(VantjCYWhetHsuancalled'DuanXielin'inChineseisusedinfolkmedicineforthetreatInentofhaemorrhagiadisease.lInordertofmdtheactivecomPounds,studiesonthechedricalconstituentsofthewholeplan,collectedatHuoShanofAnhuiprovince,werecarriedout.Fromthealcoholicextracts,wehaveisolatedanewanthraquinone,Glyceroyl-l,6,8-trihydroxy-3-methyl-9)lO-dioxo-2-anthrcenecarboxylateI(Figurel).Iwasobtainedasredneedles,mP:ll9-l2l"C.TheHR-MSdareaffordedthefor-mulaasCl9Hl6O9(Found388.O791;…