等离子体浸没注入超低能注入掺杂研究

A plasma immersion ion implantation(PIII) system based on inductively coupled plasma(ICP) technology was designed. The PIII system had a cylindrical chamber, and a radio frequency(RF) power was used to sustain discharge and a pulsed voltage source was provided to bias the wafer. The RF power was coupled into chamber by a non-coplanar two-turn circular structure coil. A Langmuir probe was connected to the PIII system to diagnose the plasma parameters. The probe diagnosis indicated that plasma ion density of the system achieves 10¹⁷m^-3, the uniformity of the ion density along radial direction achieves 3.53%. Boron (B) and phosphorus (P) doping experiments were performed on the system. Results from second ion mass spectrum (SIMS) tests showed that the measured injection depth is about 10nm and the shallowest is 8.6 nm (at 10¹⁸cm^-3), the peak ion concentration is below the surface of the wafer, and the ion dose reaches above10¹⁵cm^-2 and the abrupt 2.5 nm/decade.     

光源稳定性对简并四波混频信噪比影响的实验研究

在碘蒸气中研究了染料激光稳定性对简并四波混频(DFWM)信噪比的影响。实验中采用多模Nd∶YAG激光器倍频的输出泵浦染料激光器(染料PM580溶于酒精)。在具有前向补偿分光系统和图像探测系统的帮助下,在常温常压条件下测得泵浦光在波长为554.013 nm时达到饱和光强为290 μJ。同时发现染料激光器的光稳定性(输出波长范围,光束质量和能量转换效率等)随使用时间,泵浦激光脉冲次数和能量的增加而逐渐减弱。另外通过对比发现在染料激光器输出不稳定时,光源单色性和指向性等指标的变化导致在同一泵浦强度不同时刻获得的DFWM信号强度相差很大,且DFWM信号信噪比低。染料激光器光源稳定性对DFWM信号影响的研究结果对物质的痕迹量探测以及无荧光物质光谱定标等方面的应用具有重要意义。     

Generation of Broadband High Harmonics through Linear Mode Conversion in Inhomogeneous Plasmas

The generation of high order harmonics from an inhomogeneous ovderdense plasma target irradiated by an ultrashort intense laser pulse is studied by numerical simulation. During such interaction, ultrafast electron bunches are generated and excite electron plasma oscillations as they pass through the overdense target. These plasma oscillations will emit high-frequency electromagnetic emission by linear mode conversion. Instead of the integer harmonies generation, the emission appears with a broadband and even continuous spectrum corresponding to the electron plasma frequency range of the inhomogeneous plasma density.     

Lattice Boltzmann Simulation of the Cross Flow Over a Cantilevered and Longitudinally Vibrating Circular Cylinder

The multiple-relaxation-time lattice Boltzmann method （MRT-LBM） is implemented to numerically simulate the cross flow over a longitudinal vibrating circular cylinder. This research is carried out on a three-dimensional （3D） finite cantilevered cylinder to investigate the effect of forced vibration on the wake characteristics and the 3D effect of a cantilevered cylinder. To meet the accuracy of this method, the present calculation is carried out at a low Reynolds number Re =100, as well as to make the vibration obvious, we make the vibration strong enough. The calculation results indicate that the vibration has significant influence on the wake characteristics. When the vibrating is big enough, our early works show that the 2D vortex shedding would be locked up by vibration. Contrarily, this phenomenon would not appear in the present 3D case because of the end effect of the cantilevered cylinder.     

壁面热特性对超声速燃烧室热环境的影响

在分析燃烧室壁面的对流-辐射耦合换热特性基础上,考虑燃烧室热环境与冷却系统间的相互关系,提出了一种以燃烧室材料许用温度为约束的非均匀冷却壁面热特性设计方法.以某型超声速燃烧室为例,采用混合分数平衡化学反应和液滴离散相模型,计算分析了壁面热特性对燃烧室壁面热流构成、热环境及冷却系统热负荷的影响.结果表明,壁面热特性对超声速燃烧室热环境的影响值得重视,非均匀冷却壁面热特性设计能有效减少燃烧室热损失.     

Structural Deformation of CO22+ in Intense Femtosecond Laser Fields

The angular distributions of CO^＋ from the dissociation of CO2^2＋ and CO2^＋ in intense femtosecond laser fields （45 fs, about 5 × 10^15 W/cm^2） are studied at a laser wavelength of 800nm based on the time-of-flight mass spectra of CO^＋ fragment ions. The experimental results show that structural deformation occurs in the charge state of CO2^2＋ and the CO^＋ maintains linear geometrical structure.     

Photoluminescence and X-Ray Photoelectron Spectroscopy of p-Type Phosphorus-Doped ZnO Films Prepared by MOCVD

Reproducible p-type phosphorus-doped ZnO （p-ZnO：P） films are prepared on semi-insulating InP substrates by metal-organic chemical vapour deposition technology. The electrical properties of these films show a hole concentration of 9.02 × 10^17 cm ^-3, a mobifity of 1.05 cm^2 /Vs, and a resistivity of 6.6 Ω.cm. Obvious acceptorbound-exciton-related emission and P-induced zinc vacancy （Vzn） emission are observed by low-temperature photoluminescence spectra of the films, and the acceptor binding energy is estimated to be about 125meV. The local chemical bonding environments of the phosphorus atoms in the ZnO are also identified by x-ray photoelectron spectra. Our results show direct experimental evidence that Pzn-2Vzn shallow acceptor complex most likely contributes to the p-type conductivity of ZnO：P films.     

强激光远场焦斑重构算法研究

 通过CCD图像采集单元结合传统的列阵相机测量高功率固体激光器的远场焦斑分布，采用图像处理技术的边缘算子提取焦斑的几何中心，提出通过几何中心对心的焦斑嵌套重构算法，解决了光斑饱和时的对心难题，实现了快捷准确测量激光焦斑，为激光器的实时控制提供参考数据。     

表面活性剂添加对水平管内气液两相流含液率的影响

应用电导断层测量技术研究表面活性剂添加对水平管内气液两相流含液率的影响,实验工质为空气/水、空气/100 mg/kg十二烷基硫酸钠(SDS)水溶液。结果表明,空气/水气液两相流动在光滑分层流型区,表面活性剂添加对平均截面含液率基本没有影响。随着液体流速的增加,空气/水气液两相流动进入波状分层流型区域,添加表面活性剂可以抑制或消除界面波动,增大平均截面含液率。表面活性剂的添加使弹状流含液率下降,气液流速较低时这一现象尤为明显。     

F-P干涉仪腔镜的不平行度对高斯光束透射特性的影响

基于多光束干涉原理,推导出了高斯光束经过两腔镜不严格平行的F P干涉仪后透射光强度的表达式。在此基础上,数值研究了F P干涉仪腔镜的不平行度对高斯光束透射特性的影响。结果表明:随着F P两腔镜不平行度的增大,透射光的峰值强度总体呈现下降的趋势,且在下降的过程中会出现波动;峰值强度位置将发生移动;光斑的均方根宽度将发生变化。