Mechanism of detachment of particles from the surface of high-temperature superconducting targets absorbing laser pulses

A cluster mechanism is considered for the detachment of particles when the surface of a high-temperature superconducting target absorbs laser pulses. By proposing a fractal nature for the surface, one can model it as an assembly of a large number of nonlinear oscillators (clusters). Utilizing the method of sudden perturbations, a calculation was made of the probability of dissociation of these oscillators, i.e., of the detachment of clusters from the surface. The calculated probability decreases rapidly as the power density of the laser radiation is reduced to some limiting value. This is in agreement with experiments. State Institute of Sensory Microelectronics. Siberian Branch of the Russian Academy of Sciences. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 6, pp. 73–77, June, 1997.     

Quantification of stable minor species in confined flames by cavity ring-down spectroscopy: application to NO

Cavity ring-down spectroscopy (CRDS) is used to measure the NO mole fraction formed in the burnt gases of low-pressure premixed flames. It is shown that the line-of-sight absorption is greatly increased by the contribution of the NO molecules surrounding the burner. This contribution has been quantified by developing a mathematical procedure taking into account the spatial and spectral features of the CRDS measurement. Calculations have been undertaken in the general case of a stable species not consumed in the flame. The most sensitive parameter is the temperature both in the flame and outside the flame. Simulations allow the selection of the best spectroscopic transitions for a given flame (i.e. a given temperature profile), ensuring the weakest influence of the inaccuracy affecting the temperature determination. High quantum states belonging to the A–X (0–1) band of NO have been found to be the most valuable and have led to a NO mole fraction determination with an accuracy of ±13%. NO absorption in the flame was completely masked using the A–X (0–0) band. Finally, the prompt-NO mole fraction formed in a methane/air flame stabilized at 33 Torr is obtained by combining CRDS and laser induced fluorescence techniques. Received: 12 October / Revised version: 1 February 2002 / Published online: 14 March 2002     

Deuterium NMR studies of inositol liquid crystals [1]

Deuterium NMR investigations are presented on members of two new mesogenic series derived from the naturally occurring stereoisomers myo- and scW/o-inositol. Tetraethers of these two series exhibit thermotropic columnar phases in which the columns are apparently formed by stacked hydrogen bonded dimers of these molecules which chemically are vicinal diols. Deuterium NMR measurements were performed on the tetraoctyl homologues 2e (a cis diol) and 3e (a trans diol) of these series. We have investigated mixtures of these diols with small amounts of benzene-d₆ as probe molecules as well as samples of the neat diol compounds deuteriated at their hydroxyl groups. The results obtained show that the mesophases of both compounds are uniaxial and align partially in a magnetic field upon slow cooling from their isotropic liquids. The alignment is with the director parallel to the field direction indicating that the anisotropic magnetic susceptibility of this mesophase is positive. The deuterium quadrupole splitting of the benzene-d₆ probe in both systems is temperature dependent and in the trans diol 3e it even changes sign. This is interpreted in terms of a model in which the benzene-d₆ probe equilibrates rapidly between two (or more) solvation sites with quadrupole splittings of opposite signs The deuterium spectra of the neat deuterium labelled cis diol 2e exhibit two different signals due to the two deuterons which are located at the axial and equatorial hydroxyl groups. This indicates that there is no fast intra- or intermolecular exchange of the hydroxyl hydrogens. The overall quadrupole splittings of the hydroxyl deuterons in this compound are highly reduced compared to their static values and this is interpreted in terms of motional modes involving both reorientation of the hydroxyl deuterons about their C-O axis and overall reorientation of the molecules (or pairs of molecules) around the columnar axes. The corresponding spectra of the neat deuteriated trans diol 3e exhibit a single spectrum indicating that both hydroxyl deuterons in this compound are equivalent, or very nearly so. Within the mesophase region the spectrum undergoes gradual changes due to the increase in the molecular mobility, but the overall motional narrowing is less than in the cis isomer 2e. Apparently due to stronger hydrogen bonding in the trans isomer 3e the precession of the hydroxyl groups is hindered and a fast molecular reorientation is only possible at high temperatures.     

Peroxyoxalate chemiluminescence detection of condensates of malondialdehyde with thiobarbituric acids using a flow system.

The peroxyoxalate chemiluminescence(CL) detection method for the evaluation of the CL intensity of malondialdehyde(MDA) condensates with seven 2-thiobarbituric acid derivatives is described. The method consists of a flow injection technique together with a CL detection system using bis(2,4,6-trichlorophenyl) oxalate(TCPO) and hydrogen peroxide as chemiluminogenic reagents. Linear correlations between CL intensity and concentration are obtained for pmol levels of condensates. Among the condensates, 1,3-diethyl-2-thiobarbituric acid(DETBA)-MDA shows the largest CL intensity. High performance liquid chromatography (HPLC)/CL detection of DETBA-MDA and 1,3-diphenyl-2-thiobarbituric acid(DPTBA)-MDA using a mixture of TCPO and hydrogen peroxide in acetonitrile as a postcolumn reagent solution is also described. The detection limits for DETBA-MDA and DPTBA-MDA are 20 and 200 fmol, respectively, per 20 microL injection at a signal-to-noise ratio of 2. This HPLC/CL detection system was applied to the determination of MDA in rat brains by using DETBA as a fluorescent derivatizing reagent.     

Numerical analysis for the periodic response of nonsmooth dynamic systems of high-dimension

This paper deals with the numerical solution of high dimensional dynamic systems with nonsmooth characteristics, such as structural elastoplasticity, mechanical clearance and dry friction. As a stable periodic response of the system attracts its transient response, it may be extracted from the transient response somehow. The paper suggests a novel iteration scheme to extrapolate the periodic response from a short time history of its transient response by curve fitting. Compared with the current schemes such as shooting and incremental harmonic balancing, the present scheme makes full use of the information within the transient response and the system characters, then its computation efficiency has increased by an order and the numerical convergence depending on the initial iteration has greatly improved.The subject supported by the Chinese Foundation of Aeronautical Science     

Two-dimensional Numerical Simulation of the Beam-Plasma-Discharge

A two-dimensional self consistent model of the Beam-Plasma-Discharge (BPD) has been developed to calculate the discharge ignition of a bandlike electron beam in a discharge chamber. The discharge was considered in Argon with an initial concentration of 10¹⁴ cm^?3. The model allows calculation of the time evolution of perpendicular profiles of electron density, temperature and the potential.     

Book reviews

Ohne Zusammenfassung

---

Book reviews

     

Glass transitions in hydrogen-bonded polymer complexes

Mutual precipitates of poly (N, N-dimethyl acrylamide) and poly (4-hydroxystyrene) were collected from dioxane, methanol, or acetone. The glass transition (T_g) temperatures of the precipitates are higher than the weight-average values. Clear films cast from dimethylformamide solutions have lower T_g values. Complexation also occurred between poly (ethyl oxazoline) and poly (4-hydroxystyrene) in dioxane and between poly (vinyl pyrrolidone) and poly (4-hydroxystyrene) in methanol. Again, the glass transition temperatures of the precipitates are higher than the values for the blend films. The ΔC_p values associated with the glass transitions of the complexes are smaller than those of the blends having the same compositions. Negative excess heat capacities of mixing have been observed for several precipitates.     

Specific high performance liquid chromatographic determination of the molecular weight and concentration of hyaluronic acid in complex mixtures by labelled hyaluronate binding proteins.

A simple High performance liquid chromatographic (HPLC) method for the specific determination of the molecular weight and concentration of hyaluronic acid (HA) in complex mixtures has been developed. Hyaluronate-binding proteins isolated from bovine cartilage labelled by 125I or fluoresceinisothiocyanate were used as specific markers. The specific binding affinities of the markers were compared and were found to have association constants of 1.6 x 10(7) M-1 and 1.2 x 10(7) M-1 respectively. The HA levels and molecular weight distributions can be easily determined in the range 10-500 ng/mL in complex mixtures by the use of markers, molecular sieving HPLC columns and appropriate detectors. It has been demonstrated clearly that the method is useful for the highly specific determination of the parameters in complex biological samples such as serum and synovial fluids and is recommended for clinical applications.