Finite element modeling of laser-induced three-dimensional Transient Thermal Grating in two-layered systems

The three-dimensional (3D) temperature field of laser-induced transient thermal grating (TTG) for two-layered structures such as diamond/substrate is obtained by the finite element method (FEM). The numerical results indicate that the thickness of the diamond film has a significant influence on the temperature field. On the other hand, we further find that variation of the substrate significantly affects on the temperature distribution in the diamond film, which has been ascribed to the various thermal conductivities of the substrates.     

Evolution in shapes of a series of (111)-based In<Subscript>2</Subscript>O<Subscript>3</Subscript> particles

In₂O₃ particles with different morphology were controllably synthesized on silicon substrates by thermal evaporation of In grains at 900 °C. The structure and morphology of the In₂O₃ particles were evaluated using X-ray diffraction, and scanning and transmission electron microscopies. The evolution in shapes as the ratio of {100} relative to {111} increases is clearly observed. The photoluminescence spectrum of the obtained In₂O₃ structures exhibits UV emission centered at about 378 nm and wide-band emission covering the green and orange regions with three peaks around 525, 572, and 604 nm. PACS 81.05.Hd; 81.07.Bc; 81.16.-c; 61.46.-w; 81.40.Gh     

一种基于哈特曼传感器的角锥棱镜检测方法

在使用角锥棱镜前对其进行检测,选取误差较小的棱镜是一项关系到整个测量工作结果的重要任务。因此,提出一种用哈特曼波前传感器全面检测角锥棱镜角度误差和面形误差的技术方案,从理论上分析了哈特曼法的测量原理,深入研究了光经过角锥棱镜后的波面重建,给出了波面特征与角锥棱镜误差参量之间的关系。在试验中验证了这种方法的正确性和可行性。     

基于BPLT模型的小麦叶片背景扣除方法的研究

为准确且无损测定小麦叶片的反射光谱,研究了不同背景对叶片表面反射光谱的影响,在400～1 000 nm波段范围测定了小麦叶片8种背景下的反射光谱以及叶绿素含量。以PLATE模型为基础,首次提出了BPLT(background plate)模型,扣除由不同背景导致的叶片反射光谱的变化。模型以背景下叶片的反射率R₀,不同背景反射率σ为输入,空气和致密叶片的界面反射比R₁₂,致密叶片和空气的界面反射比R₂₁,致密叶片的透射系数τ三参数中间变量,得到最终无背景时叶片反射率R值的2-3-1模型。采用方差分析法(analysis of variance, ANOVA)进行了BPLT模型验证,对比分析了背景扣除前后10种叶绿素指数值的变化。结果表明,当反演的确定系数DC(determination coefficients)>0.90且残差平方和SSE<1时,反演的灵敏度较高,对小麦叶片不同叶绿素浓度的背景扣除有着较好的效果;采用BPLT模型背景扣除后,背景因素所占的百分比低于5%;优选了NDI&MCARI的函数关系,NDI&MCARI的斜率和叶绿素浓度的R2由背景扣除前的0.847 4提高到背景扣除后的0.977 8。为真实测定不同背景下小麦叶片的反射光谱提供了依据。     

Orientation-dependent deformation mechanisms of bcc niobium nanoparticles

Nanoparticles usually exhibit pronounced anisotropic properties, and a close insight into the atomic-scale deformation mechanisms is of great interest. In present study, atomic simulations are conducted to analyse the compression of bcc nanoparticles, and orientation-dependent features are addressed. It is revealed that surface morphology under indenter predominantly governs the initial elastic response. The loading curve follows the flat punch contact model in [1 1 0] compression, while it obeys the Hertzian contact model in [1 1 1] and [0 0 1] compressions. In plastic deformation regime, full dislocation gliding is dominated in [1 1 0] compression, while deformation twinning is prominent in [1 1 1] compression, and these two mechanisms coexist in [0 0 1] compression. Such deformation mechanisms are distinct from those in bulk crystals under nanoindentation and nanopillars under compression, and the major differences are also illuminated. Our results provide an atomic perspective on the mechanical behaviours of bcc nanoparticles and are helpful for the design of nanoparticle-based components and systems.     

The Influence of Inlet Disturbances on the Post-Stall Behaviors in Compression System

The object of this paper is to provide a reliable tool to carry out the parametrical studies of post-stall behaviors in multistage axial compression systems. An adapted version of the 1.5D Euler equations with additional source terms is discretized with a finite volume method and are solved in time by a fourth-order Runge–Kutta scheme. The equations are discretized at mid-span both inside the blade rows and the non-bladed regions. The source terms express the blade-flow interactions and are estimated by calculating the velocity triangles for each blade row. Additional source terms are introduced to represent the effects of inlet disturbances on post-stall behaviors and the physical analysis is therefore proposed to explain the phenomenon.     

一种新的磁共振图像处理流水线的设计与实现

磁共振图像的重建、后处理及可视化是磁共振成像（MRI）系统的重要组成部分.本文开发了一个新的用于磁共振图像重建、后处理及可视化的开源框架YAP（Yet Another Pipeline）,利用此框架可以方便地构建图像处理流水线.与现有的一些其他开源框架相比,本文开发的框架具有如下特点：（1）采用基于接口的设计,可使用基于接口的插件对流水线的功能进行扩展;（2）允许用户使用编写脚本的方式构建图像处理流水线,编辑与修改流水线都很方便;（3）支持带有分支结构的流水线,便于流水线的构建与调试.目前,该框架已经在商用系统中获得了应用.     

Electronic structures,magnetic properties and band alignments of 3d transition metal atoms doped monolayer MoS2

Utilizing first-principles calculations, the electronic structures, magnetic properties and band alignments of monolayer MoS₂ doped by 3d transition metal atoms have been investigated. It is found that in V, Cr, Mn, Fe-doped monolayers, the nearest neighboring S atoms (S_NN) are antiferromagnetically polarized with the doped atoms. While in Co, Ni, Cu, Zn-doped systems, the S_NN are ferromagnetically coupled with the doped atoms. Moreover, the nearest neighboring Mo atoms also demonstrate spin polarization. Compared with pristine monolayer MoS₂, little change is found for the band edges' positions in the doped systems. The Fermi level is located in the spin-polarized impurity bands, implying a half-metallic state. These results provide fundamental insights for doped monolayer MoS₂ applying in spintronic, optoelectronic and electronic devices.     

Selective role of bainitic lath boundary in influencing slip systems and consequent deformation mechanisms and delamination in high-strength low-alloy steel

We elucidate here the deformation behaviour and delamination phenomenon in a high-strength low-alloy bainitic steel, in terms of microstructure, texture and stress evolution during deformation via in situ electron back-scattered diffraction and electron microscopy. Furthermore, the selective role of bainitic lath boundary on slip systems was studied in terms of dislocation pile-up and grain boundary energy models. During tensile deformation, the texture evolution was concentrated at {1 1 0}<1 1 1> and the laths were turn parallel to loading direction. The determining role of lath on the deformation behaviour is governed by length/thickness (l/t) ratio. When l/t > 28, the strain accommodates along the bainite lath rather than along the normal direction. The delamination crack initiated normal to (0 1 1) plane, and become inclined to (0 1 1) plane with continued strain along (0 1 1) plane and lath plane. This indicated that the delamination is not brittle process but plastic process. The lack of dimples at the delaminated surface is because of lack of strain normal to the direction of lath. The delaminated (0 1 1) planes were associated with cleavage along the (1 0 0) plane.     

共形单步交替方向隐式时域有限差分方法及其改进

提出了一种基于共形网格技术的共形单步交替方向隐式时域有限差分(CLeapfrog ADI-FDTD)方法。与常规FDTD方法相比,此方法能够减小由于目标边界不契合网格划分而引入的阶梯近似误差,提高算法计算不规则目标时的精度;同时算法稳定性更强,计算效率更高。由于引入共形技术后显著降低了原差分法的无条件稳定性,本文利用增长矩阵本征值方法理论分析了算法的稳定性,然后采用了一种改进的共形面积计算方法,在此基础上提出了一种稳定性更高的改进的共形单步交替方向隐式时域有限差分(ICLeapfrog ADI-FDTD)方法。数值算例验证了ICLeapfrog ADI-FDTD是一种具有高稳定性和高精度的高效算法。