光信息科学与技术专业的建设

就光信息科学与技术专业建设的专业定位、课程设置、学生毕业后的去向等问题发表了个人的看法。介绍了在这方面的一些做法,提供了有关数据,可供同类专业的建设参考。     

煤粉再燃对600 MW锅炉NOx排放的影响

在国内某台燃用褐煤的600 MW机组锅炉上进行了煤粉再燃技术示范并进行了工业试验.机组在600 MW负荷下运行时,NOx排放可控制在274 mg/m3(烟气中氧量折算到6%,下同)的水平,比改造前下降了65.36%,同时燃烧效率没有降低.进行了常规通风、空气分级和煤粉再燃三个工况下的试验,结果表明,煤粉再燃对NOx的控制效果最好,其次为空气分级.再燃煤粉比例对NOx排放也有明显的影响,在试验条件下,随着再燃燃料比例的增加,NOx排放呈降低趋势.     

Ablation induced by single-and multiple-femtosecond laser pulses in lithium niobate

We present results on the surface-damage threshold of lithium niobate after single-and multiple-femtosecond laser pulse irradiation at the pulse duration of 80 fs, with a 800-nm wavelength, and a repetition rate of 1 kHz. The surface-ablation threshold was found to decrease significantly with an increase in the pulse number applied to the surface until reaching an almost constant level due to an incubation effect, which is attributed to the laser-induced defect formation. The threshold of lithium niobate under a single shot is found to be 2.82 J/cm², and the threshold fluence for an infinite number of pulses F _th(∞) converges to a common value of 0.52 ± 0.06 J/cm² for N > 80. The results have the potential for application in laser micromachining and the fabrication of related optical devices and applications in frequency conversion by a femtosecond laser in lithium niobate.     

吸附制冷中化学吸附的滞后圈研究

文中通过对活性炭-氨以及氯化钙-氨的对比试验,对氯化钙-氨化学吸附的滞后圈进行了研究,结果表明, 化学吸附的滞后现象非常严重,已经超出了气-固吸附的Zigmondy、McBain以及Cohan模型所能解释的范围。对化学吸附的Claperon图进行研究,发现吸附床冷却及加热过程中存在着一段等压冷却以及加热过程,这两个过程与吸附滞后圈相对应。对此现象进行分析,结果表明化学吸附的滞后圈形成原因主要与络合物的稳定常数以及吸附特性相关。     

第九讲光速减慢和光缓存技术

高速光信号的存储是光信息科学的重要分支,全光缓存器是当今高速光信号处理的瓶颈.本文介绍了全光缓存器的研究进展,着重介绍了光速减慢的原理、物理基础, 以及在半导体量子点中利用电磁诱导透明效应发展全光缓存器的思路.     

Charmed-meson decay constants in three-flavor lattice QCD

We present the first lattice QCD calculation with realistic sea quark content of the D+-meson decay constant f(D+). We use the MILC Collaboration's publicly available ensembles of lattice gauge fields, which have a quark sea with two flavors (up and down) much lighter than a third (strange). We obtain f(D+)=201+/-3+/-17 MeV, where the errors are statistical and a combination of systematic errors. We also obtain f(Ds)=249+/-3+/-16 MeV for the Ds meson.     

Effect on Intensity Correlation Time by Input Signal in a Single-Mode Laser with Bias Signal Modulation

The effect on intensity correlation time T by input signal is studied for gain-noise model of a single-mode laser driven by colored pump noise and colored quantum noise with colored cross-correlation with a bias signal modulation in this paper. By using the linear approximation method, we detect that there exists maximum (i.e., resonance) in the curve of the intensity correlation time T upon bias-current i0 when the noise correlation coefficient λ is positive; and there exists minimum (i.e., suppression) in the T-i0 curve when λ is negative. And when λ is zero, T increases monotonously with increasing i0. Furthermore, the curve of T upon the signal frequency Ω is also studied. Our study shows that no matter what the value ofλ is, there exists minimum (i.e., suppression) in the T-Ω curve.     

The magnetic entropy change in the double perovskite La2NiMnO6 with strong spin–phonon coupling

The magnetocaloric effect and the critical behavior of La₂NiMnO₆ are investigated by measurement of the magnetization around $T_C$. The magnetic entropy change $\left|\Delta S\right|$ of La₂NiMnO₆ for a field change of 0–45 kOe near the Curie temperature is about 5% of the theoretical expectation. The critical behavior of the La₂NiMnO₆ deviates from the mean field theory. These abnormal phenomena are understood in the context of the strong spin–phonon coupling in La₂NiMnO₆. It is suggested that a method of modulating this coupling would enhance the magnetic entropy change greatly, which makes the La₂NiMnO₆ a promising candidate for room-temperature magnetic refrigeration.     

Three dimensional multilayered acoustic cloak with homogeneous isotropic materials

A three-dimensional (3D) spherical acoustic cloak is designed using an acoustic layered system, which can hide an object from the detection of acoustic wave in arbitrary direction. The cloak is constructed from multilayered concentric spherical shells filled with homogeneous isotropic materials. Based on spherical wave expansion method, we confirm that significant low-reflection, acoustic-shadow-reducing, and wavefront-bending effects in 3D space can be achieved by the proposed cloak. The angle distribution of the scattered wave is further evaluated by the far-field scattering pattern. In addition, the cloak is demonstrated to work efficiently in a wide bandwidth in which the cloaking efficiency decreases with increasing frequency. This study may be helpful to design high-performance 3D acoustic cloaks for broadband acoustic waves in all incidence directions.     

Effects of oxygen-containing defect complex on the electronic structures and transport properties of single-walled carbon nanotubes

The electronic structures and transport properties of (10,0)$(10,0)$ single-walled carbon nanotube ((10,0)$(10,0)$ (SWNT)) with oxygen-containing defect complex are investigated using density functional theory in combination with nonequilibrium Green?s function method. The complex delocalizes the local states of (10,0)$(10,0)$ SWNT induced by mono- and di-vacancy but strengthens the localization of the states induced by the Stone–Wales defect. As a result, the complex partially restores the transport properties of (10,0)$(10,0)$ SWNT with vacancies, but reduces the transmission of (10,0)$(10,0)$ SWNT with Stone–Wales defect. However, the oxygen-containing defect complex only slightly influences the transmission gap and threshold voltage of the system.