新型吸附剂——球形碳化树脂的研究Ⅲ.

聚偏二氯乙烯球体经185℃预裂解后,进行960℃高温裂解,得到0.6—0.8mm粒径的球形碳化吸附树脂,碳收率为74％以上。碳化吸附树脂机械强度好,比表面为1,000M~2/g以上,对肌酸酐吸附率可达99％。     

还原席夫碱型三角架式金属配合物的合成和性质研究

由2，2，′，2＂-三氨基三乙胺(tren)与N-氧化吡啶醛经席夫碱型缩合，然后还原C=N双键形成的产物为配体(L¹)，合成了一系列新三角架式过渡金属配合物：［ML¹］²⁺［M=Mn(Ⅱ)、Ni(Ⅱ)和Zn(Ⅱ)］。利用元素分析、红外光谱、电子光谱和室温磁化率对配合物的结构和性质进行了研究。     

含氨基,羟基吸附剂对胆红素的吸附

本文分别合成了含氨基和羟基的高分子吸附剂，并对它们对胆红素的吸附性能进行了研究。实验表明，经3小时的吸附后，含氨基和含羟基的吸附剂对胆红素的吸附率可达80％以上，对其吸附胆红素的性能和机理进行了探讨。     

天线若丹明染料分子内能量与电荷传递的研究

染料三重态在染料激光的应用中起着重要作用，尤其是三重态一Z重态（T－T）吸收常常会造成谐振腔损耗＊．为了减少由基态吸收而造成的话振腔损耗，带有紫外吸收天线分子的三发色团染料已在研究问，2，5·二苯基螨喳（PP0）在紫外区（如308删）有很强的吸收，PPO－rhod．系列染料（见图1）在紫外区的吸收就很强，由PPO到若丹明母体的单线态一单线态（S功能量传递使这类三发色团染料具有较大的荧光量子效率，较小的基态重复吸收耗能卜，司．然而，在610N640nm区域中这些天线若丹明染料的激光输出效率远远小于若丹明Rh630＊，其原因正是…     

环糊精-六次甲基四胺超分子络合物电化学研究及应用

在0.05 mol/L KCl底液中,β-环糊精(β-CD)-六次甲基四胺超分子络合物在2.5次微分极谱仪上于-0.78V(vs.SCE)处产生吸附还原波,峰形对称且稳定,其峰电流与六次甲基四胺浓度在4.0×10-4-1.0×10～mol/L之间呈良好线性关系;检出限为1.5×10-4mol/L。应用该法测定了有机工业产品六次甲基四胺,并与传统方法进行了比较,结果令人满意。对超分子络合物电化学性质及分子识别机理进行了探讨。     

Morphology and degradation of biodegradable poly(L-lactide-co-β-malic acid)

Poly(L -lactide-co-β-malic acid) was obtained after the hydrogenolysis of the copolymer of L -lactide (L-LA) and β-benzyl malate (MA). ¹H-NMR demonstrated that the composition of the copolymer was identical to the feeding dose. Thermal property study revealed the morphology of the copolymer could be changed from semi-crystalline to amorphous with increasing hydrophilic β-malic acid content. The copolymers with 8 and 13 mol% β-malic acid content possessed enough mechanical property for fabricating cell scaffold. Degradation result demonstrated that most of the hydrophilic β-malic acid units broke down from the copolymer within 1 week and the ester bond between L -lactide and β-malic acid hydrolyzed prior to the inner ester bond of poly(L -lactide) (PLLA). Copyright © 2003 John Wiley & Sons, Ltd.     

Preparation and characterization of fused-silica capillary columns coated with <Emphasis Type="Italic">m</Emphasis>-carborane–siloxane copolymers for gas chromatography

The carborane–siloxane copolymers Dexsil 300, a 34.5% bis(dimethylsilyl)-m-carborane–65.5% dimethylsiloxane copolymer, and Dexsil 400, a 24.9% bis(dimethylsilyl)-m-carborane–50.8% dimethyl, 24.3% methylphenylsiloxane copolymer, were coated on fused silica capillary columns and their gas chromatographic properties were evaluated. Their selectivity was evaluated using both Rohrschneider–McReynolds constants and triacylglycerol indices. The bis(dimethylsilyl)-m-carborane unit turned out to be equivalent to two dimethylsiloxy units and one half of a diphenylsiloxy unit. The m-carborane unit was found to cause a 15–25 K shift in the elution temperature between 120 and 360 °C. The working range was from 20 and 0 °C to 380 °C for Dexsil 300 and Dexsil 400, respectively. The column bleeding levels at 380 °C were below 20 and 15 pA for Dexsil 300 and Dexsil 400, respectively.     

On the mechanism of negative differential resistance in ferrocenylundecanethiol self-assembled monolayers

Negative differential resistance (NDR) peaks in the current-voltage characteristics of ferrocenylundecanethiol self-assembled monolayers are not reversible. The peaks turn to smoothly increasing currents as oxygen is removed from the system, indicating that NDR arises from the reaction of an energetic charged species with ambient oxygen.     

Determination of metal additives and bromine in recycled thermoplasts from electronic waste by TXRF analysis

A new method for analysis of metal additives in recycled thermoplasts from electronic waste was developed, based on dissolving the samples in an organic solvent and subsequent analysis of the corresponding solutions or suspensions by total-reflection X-ray fluorescence spectroscopy (TXRF). The procedure proved to be considerably less time consuming than the conventional digestion of the polymer matrix. Additives containing Ti, Zn, Br, Cd, Sn, Sb, and Pb were analyzed in a hundred randomly selected samples from recycling, which provided an overview of the range of elemental concentrations in thermoplasts utilized for consumer electronics. The results were validated independently by instrumental neutron activation analysis (INAA), subsequent regression analysis confirmed the trueness of the chosen approach.