Application of pressure sensitive paint measurement to a low-solidity cascade diffuser of a transonic centrifugal compressor

A pressure sensitive paint (PSP) measurement has been known as a pressure field measurement technique based on the oxygen quenching phenomenon of luminescence of specific luminophores. A PSP measurement was applied for pressure field measurement in a low-solidity circular cascade diffuser of a single-stage transonic centrifugal compressor with 5 in pressure ratio for HFC134a gas. The oxygen concentration was about 500 ppm. Ru (bath-phen) was adsorbed on a silica-gel thinlayer chromatography sheet, and the sheet was pasted onto the side-wall between the cascade vanes. A drastic change in luminescent intensity was recognized during a surge condition. Also the pressure variations based on luminescent intensity agreed well with the pressure fluctuations measured using a semiconductor pressure sensor with high-frequency-response. It was shown that a PSP measurement worked well to investigate the unsteady pressure fields in a circular cascade diffuser of a transonic centrifugal compressor. Moreover, the time response of PSP becomes clear as a problem to be overcome for the present.     

Binding position of azathioprine with bovine serum albumin determined by measuring nuclear magnetic resonance relaxation time.

The interaction between azathioprine (AZ) and bovine serum albumin (BSA) is mainly due to hydrophobic binding according to the dependence of the binding constant on the ionic strength obtained by equilibrium dialysis. The binding constant and partition coefficient of AZ were smaller than those of warfarin, phenylbutazone and ibuprofen. Little variation in the proton chemical shift of AZ was observed whether there was an absence or presence of BSA (7.25 x 10(-5) M). The spin-lattice relaxation time (T1) of AZ decreased in the presence of BSA to 6-22%. The spin-spin relaxation rate (1/T2) of AZ increased 16-24 times for the methyl group and the imidazole ring and 8-13 times for the purine ring in the presence of BSA. The ratio of the spin-spin relaxation rate of the free AZ to the bound AZ ((1/T2)b/(1/T2)f) of the methyl group and the imidazole ring was 2-3 times larger than that of the purine ring. The binding of AZ to BSA was concluded to be mainly at the methyl group on the imidazole ring of AZ.     

加肋圆柱壳在轴压作用下的屈曲和后屈曲

本文讨论完善和非完善的,纵向加肋和正交加肋圆柱壳在轴压作用下的屈曲和后屈曲性态.依据文[1]提供的圆柱薄壳屈曲的边界层理论及其分析方法,给出了加肋圆柱壳在轴压作用下的屈曲和后屈曲理论分析.本文同时讨论肋骨与壳板材料不同时对加肋圆柱壳屈曲和后屈曲性态的影响.     

Theoretical Research on a Kind of Quantum Left-handed Metamaterial

Recently, research on left-handed materials （LHMs） has attracted considerable attentions. The LHMs are a kind of metameterial which have negative permittivity and negative permeability, which lead to negative refractive index in a frequency range. The LHMs that have been available so far are in the microwave range and are usually composed of classical particles, such as split-ring resonators. Some quantum phenomena such as spontaneous emission of atoms in the LHMs which are considered to be ＇classical background＇ have also been investigated. Many potential applications of LHMs have been proposed, such as superlenses which, in principle, can achieve arbitrary subwavelength resolution.     

Molecular dynamics simulation of processing using AFM pin tool

A three-dimensional molecular dynamics (MD) model is utilized to investigate the effect of tool geometry on the deformation process of the workpiece and the nature of deformation process at the atomic-scale. Results show that different states exist between the atomic force microscope (AFM) pin tool and the workpiece surface, i.e. the non-wear state, the ploughing state, the state in which ploughing is dominant and the state in which cutting plays a key role. A relationship between the deformation process of the workpiece and the potential energy variation is presented. The potential energy variation of atoms in different deformed regions in the workpiece such as plastically deformed region, elastically deformed region and the mixed deformation region is different. The features of variations of potential energy are discussed.     

Oxidation process of SiGe on SOI substrates

The oxidation of SiGe film epitaxial grown on top of SOI wafers has been studied. These SiGe/SOI samples were oxidized at 700, 900, 1100 °C. Germanium atoms were rejected from SiGe film to SOI layer. A new Si_1−xGe_x (x is minimal) layer formed at SiGe/Si interface. As the germanium atoms diffused, the new Si_1−xGe_x (x is minimal) layer moved to Si/SiO₂ interface. Propagation of threading dislocation in SiGe film to SOI substrate was hindered by the new SiGe/Si interface. Strain in SOI substrate transferred from SiGe film was released through dislocation nucleation and propagation inner. The relaxation of SiGe film could be described as: strain relaxed through strain equalization and transfer process between SiGe film and SOI substrates. Raman spectroscopy was used to characterize the strain of SiGe film. Microstructure of SiGe/SOI was observed by transmission electron microscope (TEM).     

Khillah extract as inhibitor for acid corrosion of SX 316 steel

The inhibitive effect of the extract of khillah (Ammi visnaga) seeds, on the corrosion of SX 316 steel in HCl solution was determined using weight loss measurements as well as potentiostatic technique. It was found that the presence of the extract reduces markedly the corrosion rate of steel in the acid solution. The inhibition efficiency increases as the extract concentration is increased. The inhibitive effect of khillah extract was discussed on the basis of adsorption of its components on the metal surface. Negative values were calculated for the energy of adsorption indicating the spontaneity of the adsorption process. The formation of insoluble complexes as a result of interaction between iron cations and khellin, which present in the extract, was also discussed.     

谈物理实验教学中学生科学素质的培养

物理教学要实现由“应试教育”向素质教育的转轨，必须改单纯的“学科教育”为“科学教育”，即不仅要让学生掌握必要的物理知识，还要为学生的整体素质发展奠定必需的科学能力和科学品质的基础．笔者通过多年的教学实践和研究深刻地认识到，在物理教学中，加强实验教学是培养学生科学素质的重要途径和关键，也是物理学科实施素质教育的一个十分重要的方面．     

Wavelength and power monitoring of DWDM systems using scanning F–P filter calibrated with a F–P laser

A novel technique to overcome the long-term drift and hysteresis of a scanning Fabry–Perot filter was developed and applied to wavelength and power monitoring of DWDM system. By using the comb peaks generated by a temperature-stabilized, near threshold-biased Fabry–Perot diode laser as wavelength reference for the scanning Fabry–Perot filter, wavelength and power measurement accuracy of better than ±10 pm and 0.2 dB, respectively, were achieved.