Synthesis and characterization of novel redox-active percec-type dendrons

Three novel redox-active percec-type dendrons were synthesized by mucleophilic substitution reaction of 11-bromoundecyl ferrocene and substituted benzoate.All the resultant ferrocenyl-modified dendrons were confirmed through FT-IR,NMR,and elemental analysis,etc.Furthermore,the thermal properties and electrochemical behavior of these dendrons were monitored with thermogravimetry analysis(TG),differential scanning calorimetry(DSC),polarized optical microscope(POM),and cyclic voltammetry(CV). Abound phase behavior and reversible electrochemical redox reaction process in the DMF solution of these dendrons was observed.     

Wavelet-Based Method for Time-Domain Noise Analysis and Reduction in a Frequency-Scan Ion Trap Mass Spectrometer

We adopt an orthogonal wavelet packet decomposition (OWPD) filtering approach to cancel harmonic interference noises arising from an AC power source in time domain and remove the resulting rf voltage interference noise from the mass spectra acquired by using a charge detection frequency-scan quadrupole ion trap mass spectrometer. With the use of a phase lock resampling technique, the transform coefficients of the rf interference in signals become a constant, exhibiting a shift of the baseline in different rf phases. The rf interference is therefore removable by shifting the baselines back to zero in OWPD coefficients. The approach successfully reduces the time-domain background noise from 1367 electrons (rms) to 408 electrons (rms) (an improvement of 70?%) and removes the high frequency noise components in the charge detection ion trap mass spectrometry. Unlike other smoothing or averaging methods commonly used in the mass-to-charge (m/Ze) domain, our approach does not cause any distortion of original signals.     

Reduction of Chemical Reactions in Nitrogen and Nitrogen–Hydrogen Plasma Jets Flowing into Atmospheric Air

The large number of possible chemical reactions represents a severe burdenfor modeling of even relatively simple plasma systems. Reduced sets ofchemical reactions have been obtained for numerical simulations of nitrogenand nitrogen-hydrogen plasma jets flowing into an atmospheric airenvironment. The important or active reactions are determined based on asimplified reduction method. A reaction is considered active if it leadsto higher sensitivities than a specified cutoff sensitivity of 1%. Theactive reactions exert a significant influence on main plasma parameters,such as velocity, temperature, and species concentrations. The sensitivityanalysis for the specified systems shows that two NO reactions, known asZel'dovich reactions (N₂+ONO+N andNO+OO₂+N),⁽¹⁾ are both active in a nitrogenplasma jet. On the other hand, the latter is not active and may be omittedin a nitrogen–hydrogen plasma jet. A nitrogen–hydrogen plasmajet requires contribution of two active charge exchange reactions:N₂+N⁺N⁺ ₂+N andN+H+N+ +H, while only the former is needed in a nitrogen plasmajet. The dissociation reactions are all active in both plasma jets, exceptthe dissociation of OH.     

Synthesis and properties of poly(amide–imide)s containing a N-methylcarbazole group

A new dicarboxylic acid monomer containing the N-methylcarbazole and imide structures, 3,6-bis(trimellitimido)-N-methylcarbazole (I), was prepared from the condensation of 3,6-diamino-N-methylcarbazole (c) and trimellitic anhydride. The diamine c was synthesized in three steps starting from the methylation of carbazole, followed by nitration and catalytic hydrazine reduction. A series of N-methylcarbazole-containing poly(amide–imide)s were synthesized by direct polycondensation from the diimide–diacid I with various aromatic diamines. These poly(amide–imide)s had inherent viscosities of 0.66–1.47 dl/g and were readily soluble in a variety of organic solvents, including N-methyl-2-pyrrolidone and N,N-dimethylacetamide (DMAc). Transparent, flexible, and tough films of these polymers could be cast from DMAc solutions, and these films exhibited excellent mechanical strength. The glass-transition temperatures of these poly(amide–imide)s were in the range 317–362 °C. All the poly (amide–imide) did not degrade noticeably below 480 °C in nitrogen, and the 10% weight loss temperatures and char yields at 800 °C were above 520 °C and 60% in nitrogen, respectively, indicating high thermal stability. Received: 8 February 2000/Accepted: 23 March 2000     

Characterization of metabolites of Celecoxib in rabbits by liquid chromatography/tandem mass spectrometry

The metabolism of the anti-inflammatory drug Celecoxib in rabbits was characterized using liquid chromatography (LC)/tandem mass spectrometry (MS/MS) with precursor ion and constant neutral loss scans followed by product ion scans. After separation by on-line liquid chromatography, the crude urine samples and plasma and fecal extracts were analyzed with turbo-ionspray ionization in negative ion mode using a precursor ion scan of m/z 69 (CF(3)) and a neutral loss scan of 176 (dehydroglucuronic acid). The subsequent product ion scans of the [M - H] ions of these metabolites yielded the identification of three phase I and four phase II metabolites. The phase I metabolites had hydroxylations at the methyl group or on the phenyl ring of Celecoxib, and the subsequent oxidation product of the hydroxymethyl metabolite formed the carboxylic acid metabolite. The phase II metabolites included four positional isomers of acyl glucuronide conjugates of the carboxylic acid metabolite. These positional isomers were caused by the alkaline pH of the rabbit urine and were not found in rabbit plasma. The chemical structures of the metabolites were characterized by interpretation of their product ion spectra and comparison of their LC retention times and the product ion spectra with those of the authentic synthesized standards.     

Dynamic modification of the capillary wall for electrophoretic separations of small ions

Separations of small ions were carried out under nonequilibrated conditions using capillaries treated with NaOH, HCl, or tris(hydroxymethyl)aminomethane (Tris) prior to analysis. For separations of benzoic acid isomers or acids and amines under weakly acidic conditions, capillaries flushed with 0.1 M NaOH and subsequently with running buffers prior to analysis were used. Separations of six benzoic acid isomers were accomplished in 4 min in 1 mM phosphate buffers, pH 4.01, containing 2.5 mM hydroxypropyl-beta-cyclodextrin. Without additives, the separation of biological amines and acids were also achieved in 10 min at pH 4.01. Capillaries treated with 0.1 M HCl prior to analysis were tested in separations of six phenols in 5 mM Tris solutions at pH 7.0. As a result of small electrophoretic mobilities of phenols against a small electroosmotic flow, resolution was optimized. We also found that reproducibility was improved using capillaries treated with HCl. The relative standard deviations of migration mobility of phenols were less than 1%, which were smaller than those obtained using capillaries treated with 0.1 M NaOH or Tris.     

Two new acylated flavonol glycosides from Vicia amurensis

Two new acylated flavonol glycosides, named amurenosides A and B, together with quercetin 3-(2,6-di-O-alpha-rhamnopyranosyl-beta-galactopyranoside), have been isolated from the whole plant of Vicia amurensis. Their structures were elucidated as quercetin 3-O-alpha-L-(3-feruloylrhamnopyranosyl)(1-->6)-[alpha-L-rhamnopyra nosyl(1-->2)]-beta-D-galactopyranoside and quercetin 3-O-alpha-L-(2-feruloylrhamnopyranosyl)(1-->6)-[alpha-L-rhamnopyra nosyl(1-->2)]-beta-D-galactopyranoside on the basis of various NMR techniques, FAB mass spectrometry and chemical reactions.     

Determination of sulfite in Oriental herbal medicines

Sulfite was detected in 7 varieties of Oriental herbal medicines (Pueraria radix, Zingiberis rhizoma, Platycodon radix, Adenophora radix, Pinellia tuber, Astragalus radix, and Paeonia radix) on the Korean market. Sulfiting of commercial Oriental herbal medicines by fumigation with burning bituminous coal was simulated, and the accumulation of sulfite was investigated by using fresh Platycodon radix roots obtained from a growing field. The sulfite level reached a plateau in 9 h, and the maximum sulfite level found by the Monier-Williams (MW) method (AOAC 990.28) was 1020 ppm. The sulfite content in the simulated Platycodon radix sample determined by alkali extraction followed by ion-exclusion chromatography with electrochemical detection (AOAC 990.31) was approximately 17% lower on average than the MW results. Free-sulfite levels determined by acid extraction and ion-exclusion chromatography with electrochemical detection were between 19 and 49% of the MW results. The advantages of different methods for sulfite determination and the significance of the results are discussed.     

Characterization of amiodarone metabolites and impurities using liquid chromatography/atmospheric pressure chemical ionization mass spectrometry

Using the high performance liquid chromatography/atmospheric pressure chemical ionization tandem mass spectrometry (HPLC/APCI-MS/MS) technique, together with established trends from the literature, the structures of metabolites and impurities of amiodarone, an anti-arrhythmic drug, have been assigned. By comparing analyses of products of incubation with rat liver microsomes with controls in which glucose 6-phosphate dehydrogenase was omitted, metabolites could be distinguished from impurities. Structures for the two proposed metabolites and four impurities are proposed.     

Effect of ionic strength, pH and polymer concentration on the separation of DNA fragments in the presence of electroosmotic flow

DNA separations in the presence of electroosmotic flow (EOF) using poly(ethylene oxide) (PEO) solutions have been demonstrated. During the separations, PEO entered capillaries filled with Tris-borate (TB) free buffers by EOF and acted as sieving matrices. We have found that ionic strength and pH of polymer and free solutions affect the bulk EOF and resolution differently from that in capillary zone electrophoresis. The EOF coefficient increases with increasing ionic strength of the free TB buffers as a result of decreases in the adsorption of PEO molecules. In contrast, the bulk EOF decreases with increasing the ionic strength of polymer solutions using capillaries filled with high concentrations of free TB buffers. Although resolution values are high due to larger differential migration times between any two DNA fragments in a small bulk EOF using 10 mM TB buffers, use of a capillary filled with at least 100 mM TB free buffers is suggested for high-speed separations. On the side of PEO solutions, 1.5% PEO solutions prepared in 100 to 200 mM TB buffers are more proper in terms of resolution and speed. The separation of DNA markers V and VI was accomplished less than 29 min in 1.5% PEO solutions prepared in 100 mM TB buffers, pH 7.0 at 500 V/cm using a capillary filled with 10 mM free TB buffers, pH 7.0.