Significant decrease in interfacial energy of grain boundary through serrated grain boundary transition

The mechanism of serrated grain boundary formation and its effect on liquation behaviour have been studied in a wrought nickel-based superalloy – Alloy 263. It was newly discovered that grain boundaries are considerably serrated in the absence of γ?′-phase or M₂₃C₆ at the grain boundaries. An electron energy-loss spectroscopy study suggests that serration is triggered by the discontinuous segregation of C and Cr atoms at grain boundaries for the purpose of relieving the excessive elastic strain energy. The grain boundaries serrate to have specific segments approaching one {111} low-index plane at a boundary so that the interfacial free energy of the grain boundary can be decreased, which may be responsible for the driving force of the serration. The serrated grain boundaries effectively suppress grain coarsening and are highly resistant to liquation due to their lower wettability resulting from a lower interfacial energy of the grain boundary.     

Some New Features in the Pseudoscalar Meson and Vector Meson Photoproductions

We investigate the role of the t-channel meson exchange in various photoproduction processes to discuss features of the respective production mechanism. For the less model-dependent analysis we work with the t-channel meson pole reggeized in the Born approximation amplitude. With the meson–baryon coupling constants chosen consistently with symmetry prediction we show that the Reggeized pole model could reproduce the experimental data to a good degree in the lower energy region. Numerical consequences show the significance of the tensor meson exchange in the γ p → K ⁺Λ, the dominance of the pseudoscalar meson exchange in the πΔ (and KΣ*) processes, and the sizable role of the vector-meson magnetic moment in the charged ρ (and K*) photoproductions, respectively. These new features from the present analyses could provide a useful guide for future study of the N* resonances in the low energy region.     

Current–voltage characteristic of BaTiO3−δ in its mixed n/p regime under oxygen potential gradients

Current (I)–voltage (V) characteristic under oxygen potential gradients was experimentally examined on single crystal BaTiO_3−δ in its mixed ion/electron/hole regime at 1000 °C. The variation of I vs. V appears similar to that of an n/p junction, but with the limiting slope (dI/dV) approaching the maximum and minimum possible equilibrium conductances in the given oxygen potential gradient as increasing forward and reverse bias, respectively. This characteristic has been precisely traced theoretically by using the partial ionic and electronic conductivities of BaTiO_3−δ as measured against uniform oxygen chemical potential in equilibrium state. The nonlinear characteristic is attributed to the redistribution of oxygen chemical potential that is caused by a non-vanishing gradient of the ionic transference number of the oxide under the given oxygen potential gradient. It is demonstrated that the bulk transport properties of a mixed conductor may be tailored by terminal voltage in a chemical potential gradient.     

Parity violation at neutron p-wave resonances of238U and232Th and related questions

Parity violation effects have been studied at 40 neutron p-wave resonances of the even-even nuclei²³⁸U and²³²Th. Of these 11 show parity violation effects larger than 2 standard deviations, making parity violation a rather common phenomenon. Parity mixing up to 10% has been found. The root-mean squared matrix elements for parity violation derived from these resonances are M=0.58 (+0.50/-0.25) meV for²³⁸U, respectively 1.39 (+0.35/-0.38) meV for²³²Th.     

Using Gd-EOB-DTPA-enhanced 3-T MRI for the differentiation of infiltrative hepatocellular carcinoma and focal confluent fibrosis in liver cirrhosis

Purpose

The purpose of the study was to determine significant imaging features to differentiate between infiltrative hepatocellular carcinoma (HCC) and confluent fibrosis (CF) in liver cirrhosis using Gd-EOB-DTPA-enhanced 3-T magnetic resonance imaging.

Material and methods

Nineteen infiltrative HCCs and eight CFs were included. We evaluated the difference in imaging findings and apparent diffusion coefficient (ADC) between the two entities. We compared T2-weighted image (WI) and hepatobiliary phase (HBP) in terms of the clarity of the lesion outer margin.

Results

Seventeen infiltrative HCCs showed lobulated margin, while focal CFs showed either straight (n = 3) or irregular margins (n = 5) (P = .001). All infiltrative HCCs had intact or bulging contours, and all focal CFs showed capsular retraction (P = .001). Fourteen infiltrative HCCs and two focal CFs showed arterial enhancement (P = .035). The ADC of infiltrative HCCs was significantly lower than that of CFs (P = .001). Satellite nodules were noted in 10 infiltrative HCCs. In terms of outer margin clarity, infiltrative HCCs showed a more distinct margin on HBP than on T2-WI (P = .005), while these two sequences were not significantly different in focal CFs (P = 1.000).

Conclusion

HBP improved the imaging characteristics of infiltrative HCC, allowing it to be distinguished from focal CF. Infiltrative HCC showed lower ADC values than focal CF. Lobular configuration, contour bulging, enhancement pattern, associated satellite nodules and portal vein thrombosis were still found to be highly suggestive MR findings for infiltrative HCC.     

High performance Zn–Sn–O thin film transistors with Cu source/drain electrode

Zn–Sn–O (ZTO) thin film transistors (TFTs) were fabricated with a Cu source/drain electrode. Although a reasonably high mobility (μ_FE) of 13.2 cm²/Vs was obtained for the ZTO TFTs, the subthreshold gate swing (SS) and threshold voltage (V_th) of 1.1 V/decade and 9.1 V, respectively, were inferior. However, ZTO TFTs with Ta film inserted as a diffusion barrier, exhibited improved SS and V_th values of 0.48 V/decade and 3.0 V, respectively as well as a high μ_FE value of 18.7 cm²/Vs. The improvement in the Ta‐inserted device was attributed to the suppression of Cu lateral diffusion into the ZTO channel region. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation and Characterization of Electroactive Anion‐Exchange Acrylic Polymer–Gold Composites

The characteristics and performance of an ionic polymer–metal composite (IPMC), prepared with an anion‐exchange acrylic copolymer, was examined. The acrylic copolymer was synthesized by the radical copolymerization of fluoroalkyl methacrylate and 2‐(dimethyl amino)ethyl methacrylate(AMA). Effects of the AMA repeating unit's content in the copolymer and effects of the anion type present on the actuation of the IPMC were observed. The optimal content of 19.4 wt% AMA in the IPMC copolymer yielded the best actuation. The actuation also improved according to the type of anion present in the composite, in the following order: Br^???4 ^?.     

Origin of enhanced Ge interdiffusion at the initial stage of Ge deposition on Si(5 5 12)-2 × 1: Tensile stress induced by substrate chain structures

By combined investigation of STM and synchrotron PES on Ge/Si(5 5 12)-2 × 1 at 530 °C, it has been found that, in addition to the upward-relaxed surface Si atoms, a subsurface Si atom is also readily replaced by an arriving Ge atom at the initial adsorption stage. Such enhanced interdiffusion is due to a unique character of one-dimensional chain structures of the reconstructed substrate, such as π-bonded and honeycomb chains not existing on other low-index Si surfaces such as Si(001)-c(4 × 2) and Si(111)-7 × 7, applying a tensile surface stress to the neighbouring subsurface atoms. Interdiffusion of Ge having lower surface energy induces adsorption of the displaced Si atoms on the surface to form sawtooth-like facets composed of (113)/(335) and (113)/(112) with arriving Ge atoms until the surface is filled with those facets. Such displacive adsorption is the origin of high Si concentration of formed facets.     

Irreversible structural transformation of Si(1 1 4)-2 × 1 induced by subsurface carbon

Using scanning tunneling microscopy (STM), it has been found that the reconstruction of Si(1 1 4) is transformed irreversibly from a 2 × 1 structure composed of dimer (D), rebonded atom (R), and tetramer (T) rows (phase A) to a different kind of 2 × 1 structure composed of D, T, and T rows (phase B) by C incorporation. It has been confirmed by high-resolution synchrotron core-level photoemission spectroscopy (PES) that such an irreversible structural transformation is due to stable subsurface C atoms. They induce anisotropic compressive stress on the surface, which results in insertion of Si dimers to an R row to form a T row.     

Magnetism of Fe,Co, and Ni nanowires encapsulated in carbon nanotubes

We have investigated the electronic and magnetic properties of Fe, Co, and Ni nanowires encapsulated in carbon nanotubes (CNTs) using spin polarized ab initio calculation. The incorporated systems with hollow region between the nanowire and the C shell have the enhanced magnetic moments compared to the ferromagnetic nanowires tightly wrapped by CNTs. The Co nanowire encapsulated in CNTs is a strong ferromagnet and has high spin polarization regardless of the distance between the nanowire and the C shell. The results show that the Co-filled CNTs are useful for spin polarized transport nanodevice.